From: syzbot <syzbot+af9492708df9797198d6@syzkaller.appspotmail.com>
To: eadavis@qq.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [bpf?] [net?] general protection fault in dev_map_enqueue
Date: Wed, 27 Mar 2024 07:58:03 -0700 [thread overview]
Message-ID: <0000000000002ab3a50614a5a2b8@google.com> (raw)
In-Reply-To: <tencent_87499A2ED6AEFA4CB927C7C6F992F5067F06@qq.com>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
7.829816][ T1] usbcore: registered new interface driver port100
[ 7.831413][ T1] usbcore: registered new interface driver nfcmrvl
[ 7.837905][ T1] Loading iSCSI transport class v2.0-870.
[ 7.858722][ T1] virtio_scsi virtio0: 1/0/0 default/read/poll queues
[ 7.869143][ T1] ------------[ cut here ]------------
[ 7.870105][ T1] refcount_t: decrement hit 0; leaking memory.
[ 7.872514][ T1] WARNING: CPU: 0 PID: 1 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0
[ 7.874530][ T1] Modules linked in:
[ 7.875370][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1-syzkaller-g7033999ecd7b-dirty #0
[ 7.877291][ T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
[ 7.879264][ T1] RIP: 0010:refcount_warn_saturate+0xfa/0x1d0
[ 7.881153][ T1] Code: b2 00 00 00 e8 57 df e9 fc 5b 5d c3 cc cc cc cc e8 4b df e9 fc c6 05 4f 89 e8 0a 01 90 48 c7 c7 60 33 1f 8c e8 87 7b ac fc 90 <0f> 0b 90 90 eb d9 e8 2b df e9 fc c6 05 2c 89 e8 0a 01 90 48 c7 c7
[ 7.884566][ T1] RSP: 0000:ffffc90000066e18 EFLAGS: 00010246
[ 7.885519][ T1] RAX: 2b377ad567545500 RBX: ffff888020dced4c RCX: ffff8880166d8000
[ 7.886879][ T1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
[ 7.888277][ T1] RBP: 0000000000000004 R08: ffffffff815800c2 R09: fffffbfff1c396e0
[ 7.889846][ T1] R10: dffffc0000000000 R11: fffffbfff1c396e0 R12: ffffea000501edc0
[ 7.891597][ T1] R13: ffffea000501edc8 R14: 1ffffd4000a03db9 R15: 0000000000000000
[ 7.892863][ T1] FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
[ 7.896023][ T1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.897831][ T1] CR2: ffff88823ffff000 CR3: 000000000e132000 CR4: 00000000003506f0
[ 7.899872][ T1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.902920][ T1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 7.905308][ T1] Call Trace:
[ 7.906155][ T1] <TASK>
[ 7.907108][ T1] ? __warn+0x163/0x4e0
[ 7.908236][ T1] ? refcount_warn_saturate+0xfa/0x1d0
[ 7.909628][ T1] ? report_bug+0x2b3/0x500
[ 7.911322][ T1] ? refcount_warn_saturate+0xfa/0x1d0
[ 7.912413][ T1] ? handle_bug+0x3e/0x70
[ 7.913104][ T1] ? exc_invalid_op+0x1a/0x50
[ 7.913916][ T1] ? asm_exc_invalid_op+0x1a/0x20
[ 7.914971][ T1] ? __warn_printk+0x292/0x360
[ 7.915905][ T1] ? refcount_warn_saturate+0xfa/0x1d0
[ 7.917491][ T1] ? refcount_warn_saturate+0xf9/0x1d0
[ 7.919275][ T1] __free_pages_ok+0xc60/0xd90
[ 7.920758][ T1] make_alloc_exact+0xa3/0xf0
[ 7.921785][ T1] vring_alloc_queue_split+0x20a/0x600
[ 7.922946][ T1] ? __pfx_vring_alloc_queue_split+0x10/0x10
[ 7.929618][ T1] ? vp_find_vqs+0x4c/0x4e0
[ 7.930612][ T1] ? virtscsi_probe+0x3ea/0xf60
[ 7.931909][ T1] ? virtio_dev_probe+0x991/0xaf0
[ 7.933205][ T1] ? really_probe+0x2b8/0xad0
[ 7.934463][ T1] ? driver_probe_device+0x50/0x430
[ 7.936429][ T1] vring_create_virtqueue_split+0xc6/0x310
[ 7.937419][ T1] ? ret_from_fork+0x4b/0x80
[ 7.938584][ T1] ? __pfx_vring_create_virtqueue_split+0x10/0x10
[ 7.940730][ T1] vring_create_virtqueue+0xca/0x110
[ 7.941726][ T1] ? __pfx_vp_notify+0x10/0x10
[ 7.942814][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 7.943976][ T1] setup_vq+0xe9/0x2d0
[ 7.944801][ T1] ? __pfx_vp_notify+0x10/0x10
[ 7.945576][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 7.946948][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 7.948006][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 7.949084][ T1] vp_setup_vq+0xbf/0x330
[ 7.949824][ T1] ? __pfx_vp_config_changed+0x10/0x10
[ 7.950979][ T1] ? ioread16+0x2f/0x90
[ 7.951822][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 7.953388][ T1] vp_find_vqs_msix+0x8b2/0xc80
[ 7.954915][ T1] vp_find_vqs+0x4c/0x4e0
[ 7.955862][ T1] virtscsi_init+0x8db/0xd00
[ 7.956749][ T1] ? __pfx_virtscsi_init+0x10/0x10
[ 7.957896][ T1] ? __pfx_default_calc_sets+0x10/0x10
[ 7.959614][ T1] ? scsi_host_alloc+0xa57/0xea0
[ 7.961011][ T1] ? vp_get+0xfd/0x140
[ 7.962132][ T1] virtscsi_probe+0x3ea/0xf60
[ 7.962965][ T1] ? __pfx_virtscsi_probe+0x10/0x10
[ 7.964000][ T1] ? vp_set+0x34d/0x350
[ 7.965137][ T1] ? __pfx_vp_set_status+0x10/0x10
[ 7.966023][ T1] ? vp_set_status+0x1a/0x40
[ 7.966940][ T1] ? virtio_no_restricted_mem_acc+0x9/0x10
[ 7.968109][ T1] ? virtio_features_ok+0x10c/0x270
[ 7.969198][ T1] virtio_dev_probe+0x991/0xaf0
[ 7.970151][ T1] ? __pfx_virtio_dev_probe+0x10/0x10
[ 7.971070][ T1] really_probe+0x2b8/0xad0
[ 7.971988][ T1] __driver_probe_device+0x1a2/0x390
[ 7.973433][ T1] driver_probe_device+0x50/0x430
[ 7.974431][ T1] __driver_attach+0x45f/0x710
[ 7.975759][ T1] ? __pfx___driver_attach+0x10/0x10
[ 7.977202][ T1] bus_for_each_dev+0x239/0x2b0
[ 7.978309][ T1] ? __pfx___driver_attach+0x10/0x10
[ 7.979888][ T1] ? __pfx_bus_for_each_dev+0x10/0x10
[ 7.981067][ T1] ? do_raw_spin_unlock+0x13c/0x8b0
[ 7.982284][ T1] bus_add_driver+0x347/0x620
[ 7.983346][ T1] driver_register+0x23a/0x320
[ 7.984227][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 7.985533][ T1] virtio_scsi_init+0x65/0xe0
[ 7.986807][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 7.988078][ T1] do_one_initcall+0x248/0x880
[ 7.989286][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 7.990438][ T1] ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
[ 7.991719][ T1] ? __pfx_do_one_initcall+0x10/0x10
[ 7.993284][ T1] ? __pfx_parse_args+0x10/0x10
[ 7.994653][ T1] ? do_initcalls+0x1c/0x80
[ 7.995768][ T1] ? rcu_is_watching+0x15/0xb0
[ 7.996707][ T1] do_initcall_level+0x157/0x210
[ 7.997710][ T1] do_initcalls+0x3f/0x80
[ 7.998399][ T1] kernel_init_freeable+0x435/0x5d0
[ 7.999965][ T1] ? __pfx_kernel_init_freeable+0x10/0x10
[ 8.001669][ T1] ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
[ 8.003259][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.003962][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.005204][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.006149][ T1] kernel_init+0x1d/0x2b0
[ 8.007084][ T1] ret_from_fork+0x4b/0x80
[ 8.008082][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.009623][ T1] ret_from_fork_asm+0x1a/0x30
[ 8.010782][ T1] </TASK>
[ 8.011305][ T1] Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 8.012595][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1-syzkaller-g7033999ecd7b-dirty #0
[ 8.014252][ T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
[ 8.015689][ T1] Call Trace:
[ 8.016148][ T1] <TASK>
[ 8.016559][ T1] dump_stack_lvl+0x241/0x360
[ 8.017219][ T1] ? __pfx_dump_stack_lvl+0x10/0x10
[ 8.017934][ T1] ? __pfx__printk+0x10/0x10
[ 8.018600][ T1] ? _printk+0xd5/0x120
[ 8.019417][ T1] ? vscnprintf+0x5d/0x90
[ 8.020186][ T1] panic+0x349/0x860
[ 8.020754][ T1] ? __warn+0x172/0x4e0
[ 8.020754][ T1] ? __pfx_panic+0x10/0x10
[ 8.020754][ T1] ? show_trace_log_lvl+0x4e6/0x520
[ 8.020754][ T1] ? ret_from_fork_asm+0x1a/0x30
[ 8.020754][ T1] __warn+0x346/0x4e0
[ 8.020754][ T1] ? refcount_warn_saturate+0xfa/0x1d0
[ 8.020754][ T1] report_bug+0x2b3/0x500
[ 8.020754][ T1] ? refcount_warn_saturate+0xfa/0x1d0
[ 8.020754][ T1] handle_bug+0x3e/0x70
[ 8.020754][ T1] exc_invalid_op+0x1a/0x50
[ 8.020754][ T1] asm_exc_invalid_op+0x1a/0x20
[ 8.020754][ T1] RIP: 0010:refcount_warn_saturate+0xfa/0x1d0
[ 8.020754][ T1] Code: b2 00 00 00 e8 57 df e9 fc 5b 5d c3 cc cc cc cc e8 4b df e9 fc c6 05 4f 89 e8 0a 01 90 48 c7 c7 60 33 1f 8c e8 87 7b ac fc 90 <0f> 0b 90 90 eb d9 e8 2b df e9 fc c6 05 2c 89 e8 0a 01 90 48 c7 c7
[ 8.030364][ T1] RSP: 0000:ffffc90000066e18 EFLAGS: 00010246
[ 8.030364][ T1] RAX: 2b377ad567545500 RBX: ffff888020dced4c RCX: ffff8880166d8000
[ 8.030364][ T1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
[ 8.030364][ T1] RBP: 0000000000000004 R08: ffffffff815800c2 R09: fffffbfff1c396e0
[ 8.030364][ T1] R10: dffffc0000000000 R11: fffffbfff1c396e0 R12: ffffea000501edc0
[ 8.030364][ T1] R13: ffffea000501edc8 R14: 1ffffd4000a03db9 R15: 0000000000000000
[ 8.030364][ T1] ? __warn_printk+0x292/0x360
[ 8.030364][ T1] ? refcount_warn_saturate+0xf9/0x1d0
[ 8.040252][ T1] __free_pages_ok+0xc60/0xd90
[ 8.040252][ T1] make_alloc_exact+0xa3/0xf0
[ 8.040252][ T1] vring_alloc_queue_split+0x20a/0x600
[ 8.040252][ T1] ? __pfx_vring_alloc_queue_split+0x10/0x10
[ 8.040252][ T1] ? vp_find_vqs+0x4c/0x4e0
[ 8.040252][ T1] ? virtscsi_probe+0x3ea/0xf60
[ 8.040252][ T1] ? virtio_dev_probe+0x991/0xaf0
[ 8.040252][ T1] ? really_probe+0x2b8/0xad0
[ 8.040252][ T1] ? driver_probe_device+0x50/0x430
[ 8.040252][ T1] vring_create_virtqueue_split+0xc6/0x310
[ 8.040252][ T1] ? ret_from_fork+0x4b/0x80
[ 8.050346][ T1] ? __pfx_vring_create_virtqueue_split+0x10/0x10
[ 8.050346][ T1] vring_create_virtqueue+0xca/0x110
[ 8.050346][ T1] ? __pfx_vp_notify+0x10/0x10
[ 8.050346][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 8.050346][ T1] setup_vq+0xe9/0x2d0
[ 8.050346][ T1] ? __pfx_vp_notify+0x10/0x10
[ 8.050346][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 8.050346][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 8.050346][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 8.050346][ T1] vp_setup_vq+0xbf/0x330
[ 8.050346][ T1] ? __pfx_vp_config_changed+0x10/0x10
[ 8.050346][ T1] ? ioread16+0x2f/0x90
[ 8.050346][ T1] ? __pfx_virtscsi_ctrl_done+0x10/0x10
[ 8.050346][ T1] vp_find_vqs_msix+0x8b2/0xc80
[ 8.060243][ T1] vp_find_vqs+0x4c/0x4e0
[ 8.060243][ T1] virtscsi_init+0x8db/0xd00
[ 8.060243][ T1] ? __pfx_virtscsi_init+0x10/0x10
[ 8.060243][ T1] ? __pfx_default_calc_sets+0x10/0x10
[ 8.060243][ T1] ? scsi_host_alloc+0xa57/0xea0
[ 8.060243][ T1] ? vp_get+0xfd/0x140
[ 8.060243][ T1] virtscsi_probe+0x3ea/0xf60
[ 8.060243][ T1] ? __pfx_virtscsi_probe+0x10/0x10
[ 8.060243][ T1] ? vp_set+0x34d/0x350
[ 8.060243][ T1] ? __pfx_vp_set_status+0x10/0x10
[ 8.060243][ T1] ? vp_set_status+0x1a/0x40
[ 8.060243][ T1] ? virtio_no_restricted_mem_acc+0x9/0x10
[ 8.060243][ T1] ? virtio_features_ok+0x10c/0x270
[ 8.070334][ T1] virtio_dev_probe+0x991/0xaf0
[ 8.070334][ T1] ? __pfx_virtio_dev_probe+0x10/0x10
[ 8.070334][ T1] really_probe+0x2b8/0xad0
[ 8.070334][ T1] __driver_probe_device+0x1a2/0x390
[ 8.070334][ T1] driver_probe_device+0x50/0x430
[ 8.070334][ T1] __driver_attach+0x45f/0x710
[ 8.070334][ T1] ? __pfx___driver_attach+0x10/0x10
[ 8.070334][ T1] bus_for_each_dev+0x239/0x2b0
[ 8.070334][ T1] ? __pfx___driver_attach+0x10/0x10
[ 8.070334][ T1] ? __pfx_bus_for_each_dev+0x10/0x10
[ 8.070334][ T1] ? do_raw_spin_unlock+0x13c/0x8b0
[ 8.070334][ T1] bus_add_driver+0x347/0x620
[ 8.080263][ T1] driver_register+0x23a/0x320
[ 8.080263][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 8.080263][ T1] virtio_scsi_init+0x65/0xe0
[ 8.080263][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 8.080263][ T1] do_one_initcall+0x248/0x880
[ 8.080263][ T1] ? __pfx_virtio_scsi_init+0x10/0x10
[ 8.080263][ T1] ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
[ 8.080263][ T1] ? __pfx_do_one_initcall+0x10/0x10
[ 8.080263][ T1] ? __pfx_parse_args+0x10/0x10
[ 8.080263][ T1] ? do_initcalls+0x1c/0x80
[ 8.080263][ T1] ? rcu_is_watching+0x15/0xb0
[ 8.080263][ T1] do_initcall_level+0x157/0x210
[ 8.080263][ T1] do_initcalls+0x3f/0x80
[ 8.080263][ T1] kernel_init_freeable+0x435/0x5d0
[ 8.090336][ T1] ? __pfx_kernel_init_freeable+0x10/0x10
[ 8.090336][ T1] ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
[ 8.090336][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.090336][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.090336][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.090336][ T1] kernel_init+0x1d/0x2b0
[ 8.090336][ T1] ret_from_fork+0x4b/0x80
[ 8.090336][ T1] ? __pfx_kernel_init+0x10/0x10
[ 8.090336][ T1] ret_from_fork_asm+0x1a/0x30
[ 8.090336][ T1] </TASK>
[ 8.090336][ T1] Kernel Offset: disabled
[ 8.090336][ T1] Rebooting in 86400 seconds..
syzkaller build log:
go env (err=<nil>)
GO111MODULE='auto'
GOARCH='amd64'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFLAGS=''
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.21.4'
GCCGO='gccgo'
GOAMD64='v1'
AR='ar'
CC='gcc'
CXX='g++'
CGO_ENABLED='1'
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOWORK=''
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
PKG_CONFIG='pkg-config'
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3591245852=/tmp/go-build -gno-record-gcc-switches'
git status (err=<nil>)
HEAD detached at 454571b6a
nothing to commit, working tree clean
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' ./sys/syz-sysgen | grep -q false || go install ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=454571b6a16598f5a6e015b9fb1a04932bce7ab9 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240326-163935'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-fuzzer github.com/google/syzkaller/syz-fuzzer
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=454571b6a16598f5a6e015b9fb1a04932bce7ab9 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240326-163935'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=454571b6a16598f5a6e015b9fb1a04932bce7ab9 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240326-163935'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-stress github.com/google/syzkaller/tools/syz-stress
mkdir -p ./bin/linux_amd64
gcc -o ./bin/linux_amd64/syz-executor executor/executor.cc \
-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -fpermissive -w -DGOOS_linux=1 -DGOARCH_amd64=1 \
-DHOSTGOOS_linux=1 -DGIT_REVISION=\"454571b6a16598f5a6e015b9fb1a04932bce7ab9\"
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=12d2cb65180000
Tested on:
commit: 7033999e Merge tag 'printk-for-6.9-rc2' of git://git.k..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
kernel config: https://syzkaller.appspot.com/x/.config?x=7b667bc37450fdcd
dashboard link: https://syzkaller.appspot.com/bug?extid=af9492708df9797198d6
compiler: Debian clang version 15.0.6, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=1066d421180000
next prev parent reply other threads:[~2024-03-27 14:58 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-26 19:00 [syzbot] [bpf?] [net?] general protection fault in dev_map_enqueue syzbot
2024-03-27 8:10 ` syzbot
2024-03-27 14:18 ` Edward Adam Davis
2024-03-27 14:58 ` syzbot [this message]
2024-03-27 15:19 ` Alexei Starovoitov
2024-03-28 8:58 ` Jesper Dangaard Brouer
2024-03-28 20:39 ` Toke Høiland-Jørgensen
2024-03-27 22:55 ` Edward Adam Davis
2024-03-28 18:44 ` syzbot
2024-03-30 5:53 ` Edward Adam Davis
2024-03-30 16:11 ` syzbot
2024-03-31 1:31 ` Edward Adam Davis
2024-03-31 6:52 ` syzbot
2024-03-31 9:08 ` [PATCH] bpf: fix null ptr deref " Edward Adam Davis
2024-04-01 11:00 ` Jesper Dangaard Brouer
2024-04-02 3:03 ` Edward Adam Davis
2024-04-04 11:03 ` Jesper Dangaard Brouer
2024-04-04 21:02 ` Toke Høiland-Jørgensen
2024-04-05 3:55 ` [syzbot] [bpf?] [net?] general protection fault " syzbot
2024-04-08 15:30 ` Toke Høiland-Jørgensen
2024-04-08 22:03 ` syzbot
2024-04-16 20:55 ` Toke Høiland-Jørgensen
2024-04-17 14:49 ` syzbot
2024-04-17 19:18 ` Toke Høiland-Jørgensen
2024-04-18 2:51 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0000000000002ab3a50614a5a2b8@google.com \
--to=syzbot+af9492708df9797198d6@syzkaller.appspotmail.com \
--cc=eadavis@qq.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.