From: syzbot <syzbot+6b418544e63ef025d64e@syzkaller.appspotmail.com>
To: bpf@vger.kernel.org, keescook@chromium.org,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
mcgrof@kernel.org, syzkaller-bugs@googlegroups.com,
yzaikin@google.com
Subject: [syzbot] upstream boot error: BUG: unable to handle kernel paging request in insert_header
Date: Mon, 15 Aug 2022 11:00:29 -0700 [thread overview]
Message-ID: <00000000000045967505e64b68aa@google.com> (raw)
Hello,
syzbot found the following issue on:
HEAD commit: 9f162193d6e4 radix-tree: replace gfp.h inclusion with gfp_..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=166b56f3080000
kernel config: https://syzkaller.appspot.com/x/.config?x=f6bcb425ba129b87
dashboard link: https://syzkaller.appspot.com/bug?extid=6b418544e63ef025d64e
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
userspace arch: i386
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+6b418544e63ef025d64e@syzkaller.appspotmail.com
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: button: Sleep Button [SLPF]
ACPI: \_SB_.LNKC: Enabled at IRQ 11
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKD: Enabled at IRQ 10
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKB: Enabled at IRQ 10
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
N_HDLC line discipline registered with maxframe=4096
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
usbcore: registered new interface driver udl
brd: module loaded
loop: module loaded
zram: Added device: zram0
null_blk: disk nullb0 created
null_blk: module loaded
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=120)
Initialized host personality
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver viperboard
usbcore: registered new interface driver dln2
usbcore: registered new interface driver pn533_usb
nfcsim 0.2 initialized
usbcore: registered new interface driver port100
usbcore: registered new interface driver nfcmrvl
Loading iSCSI transport class v2.0-870.
scsi host0: Virtio SCSI HBA
st: Version 20160209, fixed bufsize 32768, s/g segs 256
Rounding down aligned max_sectors from 4294967295 to 4294967288
db_root: cannot open: /etc/target
slram: not enough parameters.
ftl_cs: FTL header not found.
wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
MACsec IEEE 802.1AE
tun: Universal TUN/TAP device driver, 1.6
BUG: unable to handle page fault for address: ffffdc0000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 11826067 P4D 11826067 PUD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-syzkaller-14377-g9f162193d6e4 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:strlen+0x1a/0x90 lib/string.c:487
Code: e8 db 51 a6 fd 48 8b 74 24 08 48 8b 3c 24 eb c0 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0000:ffffc90000067588 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: ffff8881472f8008 RCX: 0000000000000000
RDX: 1fffe00000000000 RSI: ffff88814727b000 RDI: ffff000000000000
RBP: ffff000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88801e795600
R13: ffff88814727b190 R14: 0000000000000003 R15: ffff000000000000
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffdc0000000000 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__fortify_strlen include/linux/fortify-string.h:141 [inline]
insert_entry fs/proc/proc_sysctl.c:164 [inline]
insert_header+0x2c0/0xf90 fs/proc/proc_sysctl.c:259
__register_sysctl_table+0x6fb/0x10a0 fs/proc/proc_sysctl.c:1379
__devinet_sysctl_register+0x156/0x280 net/ipv4/devinet.c:2586
devinet_sysctl_register net/ipv4/devinet.c:2626 [inline]
devinet_sysctl_register+0x160/0x230 net/ipv4/devinet.c:2616
inetdev_init+0x286/0x580 net/ipv4/devinet.c:279
inetdev_event+0xa85/0x1610 net/ipv4/devinet.c:1534
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
register_netdevice+0x1127/0x1680 net/core/dev.c:10103
virtnet_probe+0x1378/0x2f30 drivers/net/virtio_net.c:3929
virtio_dev_probe+0x577/0x870 drivers/virtio/virtio.c:305
call_driver_probe drivers/base/dd.c:530 [inline]
really_probe+0x249/0xb90 drivers/base/dd.c:609
__driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:748
driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:778
__driver_attach+0x223/0x550 drivers/base/dd.c:1150
bus_for_each_dev+0x147/0x1d0 drivers/base/bus.c:301
bus_add_driver+0x4c9/0x640 drivers/base/bus.c:618
driver_register+0x220/0x3a0 drivers/base/driver.c:240
virtio_net_driver_init+0x93/0xd2 drivers/net/virtio_net.c:4108
do_one_initcall+0xfe/0x650 init/main.c:1296
do_initcall_level init/main.c:1369 [inline]
do_initcalls init/main.c:1385 [inline]
do_basic_setup init/main.c:1404 [inline]
kernel_init_freeable+0x6b1/0x73a init/main.c:1611
kernel_init+0x1a/0x1d0 init/main.c:1500
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Modules linked in:
CR2: ffffdc0000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1a/0x90 lib/string.c:487
Code: e8 db 51 a6 fd 48 8b 74 24 08 48 8b 3c 24 eb c0 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0000:ffffc90000067588 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: ffff8881472f8008 RCX: 0000000000000000
RDX: 1fffe00000000000 RSI: ffff88814727b000 RDI: ffff000000000000
RBP: ffff000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88801e795600
R13: ffff88814727b190 R14: 0000000000000003 R15: ffff000000000000
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffdc0000000000 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
----------------
Code disassembly (best guess):
0: e8 db 51 a6 fd callq 0xfda651e0
5: 48 8b 74 24 08 mov 0x8(%rsp),%rsi
a: 48 8b 3c 24 mov (%rsp),%rdi
e: eb c0 jmp 0xffffffd0
10: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
17: fc ff df
1a: 48 89 fa mov %rdi,%rdx
1d: 55 push %rbp
1e: 48 89 fd mov %rdi,%rbp
21: 48 c1 ea 03 shr $0x3,%rdx
25: 53 push %rbx
26: 48 83 ec 08 sub $0x8,%rsp
* 2a: 0f b6 04 02 movzbl (%rdx,%rax,1),%eax <-- trapping instruction
2e: 48 89 fa mov %rdi,%rdx
31: 83 e2 07 and $0x7,%edx
34: 38 d0 cmp %dl,%al
36: 7f 04 jg 0x3c
38: 84 c0 test %al,%al
3a: 75 48 jne 0x84
3c: 80 7d 00 00 cmpb $0x0,0x0(%rbp)
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
reply other threads:[~2022-08-15 18:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00000000000045967505e64b68aa@google.com \
--to=syzbot+6b418544e63ef025d64e@syzkaller.appspotmail.com \
--cc=bpf@vger.kernel.org \
--cc=keescook@chromium.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
--cc=yzaikin@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.