From: syzbot <syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [fs?] KASAN: slab-use-after-free Read in test_bdev_super_fc
Date: Fri, 04 Aug 2023 12:13:32 -0700 [thread overview]
Message-ID: <0000000000004b404f06021db1c4@google.com> (raw)
In-Reply-To: <20230804125406.1583-1-hdanton@sina.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: slab-use-after-free Read in grab_super
MTD: Attempt to mount non-MTD device "/dev/nullb0"
==================================================================
BUG: KASAN: slab-use-after-free in owner_on_cpu include/linux/sched.h:2306 [inline]
BUG: KASAN: slab-use-after-free in rwsem_can_spin_on_owner kernel/locking/rwsem.c:725 [inline]
BUG: KASAN: slab-use-after-free in rwsem_down_write_slowpath+0xec2/0x1290 kernel/locking/rwsem.c:1113
Read of size 4 at addr ffff888021833bb4 by task syz-executor.1/5704
CPU: 0 PID: 5704 Comm: syz-executor.1 Not tainted 6.5.0-rc3-next-20230728-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
owner_on_cpu include/linux/sched.h:2306 [inline]
rwsem_can_spin_on_owner kernel/locking/rwsem.c:725 [inline]
rwsem_down_write_slowpath+0xec2/0x1290 kernel/locking/rwsem.c:1113
__down_write_common kernel/locking/rwsem.c:1306 [inline]
__down_write kernel/locking/rwsem.c:1315 [inline]
down_write+0x1d3/0x200 kernel/locking/rwsem.c:1574
grab_super+0x5d/0x2a0 fs/super.c:385
sget_fc+0x5d1/0x860 fs/super.c:612
get_tree_bdev+0x13e/0x6a0 fs/super.c:1324
romfs_get_tree fs/romfs/super.c:561 [inline]
romfs_get_tree+0x4e/0x60 fs/romfs/super.c:552
vfs_get_tree+0x88/0x350 fs/super.c:1522
do_new_mount fs/namespace.c:3335 [inline]
path_mount+0x1492/0x1ed0 fs/namespace.c:3662
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount fs/namespace.c:3861 [inline]
__x64_sys_mount+0x293/0x310 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fcba847cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcba77dd0c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007fcba859c050 RCX: 00007fcba847cae9
RDX: 0000000020000040 RSI: 0000000020000080 RDI: 00000000200000c0
RBP: 00007fcba84c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007fcba859c050 R15: 00007fff1814fcf8
</TASK>
Allocated by task 5683:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:186 [inline]
slab_post_alloc_hook mm/slab.h:762 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x185/0x3f0 mm/slub.c:3523
alloc_task_struct_node kernel/fork.c:173 [inline]
dup_task_struct kernel/fork.c:1113 [inline]
copy_process+0x41c/0x7400 kernel/fork.c:2338
kernel_clone+0xfd/0x930 kernel/fork.c:2920
__do_sys_clone3+0x1f1/0x260 kernel/fork.c:3221
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 15:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15e/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:162 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
kmem_cache_free+0xf0/0x490 mm/slub.c:3831
put_task_struct include/linux/sched/task.h:136 [inline]
put_task_struct include/linux/sched/task.h:123 [inline]
delayed_put_task_struct+0x246/0x2c0 kernel/exit.c:228
rcu_do_batch kernel/rcu/tree.c:2139 [inline]
rcu_core+0x7fb/0x1bb0 kernel/rcu/tree.c:2403
__do_softirq+0x218/0x965 kernel/softirq.c:553
Last potentially related work creation:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
__kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:492
__call_rcu_common.constprop.0+0x9a/0x790 kernel/rcu/tree.c:2653
put_task_struct_rcu_user kernel/exit.c:234 [inline]
put_task_struct_rcu_user+0x87/0xc0 kernel/exit.c:231
context_switch kernel/sched/core.c:5385 [inline]
__schedule+0xee9/0x59f0 kernel/sched/core.c:6711
schedule+0xe7/0x1b0 kernel/sched/core.c:6787
futex_wait_queue+0xf9/0x1f0 kernel/futex/waitwake.c:366
futex_wait+0x314/0x6d0 kernel/futex/waitwake.c:667
do_futex+0x224/0x350 kernel/futex/syscalls.c:102
__do_sys_futex kernel/futex/syscalls.c:179 [inline]
__se_sys_futex kernel/futex/syscalls.c:160 [inline]
__x64_sys_futex+0x1e1/0x4c0 kernel/futex/syscalls.c:160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
__kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:492
__call_rcu_common.constprop.0+0x9a/0x790 kernel/rcu/tree.c:2653
put_task_struct_rcu_user kernel/exit.c:234 [inline]
put_task_struct_rcu_user+0x87/0xc0 kernel/exit.c:231
release_task+0xf0a/0x1b90 kernel/exit.c:284
wait_task_zombie kernel/exit.c:1192 [inline]
wait_consider_task+0x17ca/0x4030 kernel/exit.c:1419
do_wait_thread kernel/exit.c:1482 [inline]
__do_wait+0x23c/0x870 kernel/exit.c:1601
do_wait+0x1cb/0x4c0 kernel/exit.c:1634
kernel_wait4+0x16d/0x280 kernel/exit.c:1794
__do_sys_wait4+0x15b/0x170 kernel/exit.c:1822
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888021833b80
which belongs to the cache task_struct of size 7360
The buggy address is located 52 bytes inside of
freed 7360-byte region [ffff888021833b80, ffff888021835840)
The buggy address belongs to the physical page:
page:ffffea0000860c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x21830
head:ffffea0000860c00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff88802b2d5e01
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000010200 ffff888014674500 ffffea0000904a00 dead000000000002
raw: 0000000000000000 0000000000040004 00000001ffffffff ffff88802b2d5e01
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 4952, tgid 4952 (dhcpcd-run-hook), ts 37131998344, free_ts 37098705574
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d2/0x350 mm/page_alloc.c:1569
prep_new_page mm/page_alloc.c:1576 [inline]
get_page_from_freelist+0x10d7/0x31b0 mm/page_alloc.c:3256
__alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4512
alloc_pages+0x1a9/0x270 mm/mempolicy.c:2279
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab+0x24e/0x380 mm/slub.c:2017
new_slab mm/slub.c:2070 [inline]
___slab_alloc+0x8bc/0x1570 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
kmem_cache_alloc_node+0x137/0x3f0 mm/slub.c:3523
alloc_task_struct_node kernel/fork.c:173 [inline]
dup_task_struct kernel/fork.c:1113 [inline]
copy_process+0x41c/0x7400 kernel/fork.c:2338
kernel_clone+0xfd/0x930 kernel/fork.c:2920
__do_sys_clone+0xba/0x100 kernel/fork.c:3063
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1160 [inline]
free_unref_page_prepare+0x508/0xb90 mm/page_alloc.c:2383
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2478
__unfreeze_partials+0x21d/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:166 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:185
kasan_quarantine_reduce+0x18b/0x1d0 mm/kasan/quarantine.c:292
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:186 [inline]
slab_post_alloc_hook mm/slab.h:762 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc+0x172/0x3b0 mm/slub.c:3502
getname_flags.part.0+0x50/0x4d0 fs/namei.c:140
getname_flags include/linux/audit.h:319 [inline]
getname+0x90/0xe0 fs/namei.c:219
do_sys_openat2+0x100/0x1e0 fs/open.c:1412
do_sys_open fs/open.c:1433 [inline]
__do_sys_openat fs/open.c:1449 [inline]
__se_sys_openat fs/open.c:1444 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1444
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Memory state around the buggy address:
ffff888021833a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888021833b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888021833b80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888021833c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888021833c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Tested on:
commit: d7b3af5a Add linux-next specific files for 20230728
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
console output: https://syzkaller.appspot.com/x/log.txt?x=16c3ddd5a80000
kernel config: https://syzkaller.appspot.com/x/.config?x=62dd327c382e3fe
dashboard link: https://syzkaller.appspot.com/bug?extid=2faac0423fdc9692822b
compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=10e0160da80000
next parent reply other threads:[~2023-08-04 19:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230804125406.1583-1-hdanton@sina.com>
2023-08-04 19:13 ` syzbot [this message]
[not found] <20230804233428.1642-1-hdanton@sina.com>
2023-08-05 0:11 ` [syzbot] [fs?] KASAN: slab-use-after-free Read in test_bdev_super_fc syzbot
2023-08-03 22:14 syzbot
2023-08-04 10:14 ` Christoph Hellwig
2023-08-04 13:20 ` Christian Brauner
2023-08-04 14:02 ` Christoph Hellwig
2023-08-04 14:36 ` Christian Brauner
2023-08-04 14:43 ` Christoph Hellwig
2023-08-04 14:49 ` Christian Brauner
2023-08-04 15:29 ` Christian Brauner
2023-08-05 8:57 ` Christoph Hellwig
[not found] ` <20230805084316.1699-1-hdanton@sina.com>
2023-08-05 8:48 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0000000000004b404f06021db1c4@google.com \
--to=syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.