From: syzbot <syzbot+ca2eaaadab55de6a5a42@syzkaller.appspotmail.com>
To: florian.c.schilhabel@googlemail.com, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
linux-staging@lists.linux.dev, linux-usb@vger.kernel.org,
namcao@linutronix.de, syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [staging?] [usb?] WARNING in r8712_usb_write_mem/usb_submit_urb (2)
Date: Sat, 03 Aug 2024 07:35:02 -0700 [thread overview]
Message-ID: <00000000000061c8a0061ec859b5@google.com> (raw)
In-Reply-To: <20240803142426.d8uduX0h@linutronix.de>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in r871xu_dev_remove
INFO: task kworker/1:1:28 blocked for more than 143 seconds.
Not tainted 6.6.44-syzkaller-g721391060066-dirty #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:1 state:D stack:27456 pid:28 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5380 [inline]
__schedule+0xca5/0x30d0 kernel/sched/core.c:6698
schedule+0xe7/0x1b0 kernel/sched/core.c:6772
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6831
__mutex_lock_common kernel/locking/mutex.c:679 [inline]
__mutex_lock+0x5bd/0x9d0 kernel/locking/mutex.c:747
unregister_netdev+0x12/0x30 net/core/dev.c:11102
r871xu_dev_remove+0x291/0x480 drivers/staging/rtl8712/usb_intf.c:596
usb_unbind_interface+0x1e0/0x8d0 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:569 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:561
__device_release_driver drivers/base/dd.c:1272 [inline]
device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1295
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x39d/0xa60 drivers/base/core.c:3838
usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1416
usb_disconnect+0x2e1/0x890 drivers/usb/core/hub.c:2276
hub_port_connect drivers/usb/core/hub.c:5329 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5629 [inline]
port_event drivers/usb/core/hub.c:5789 [inline]
hub_event+0x1be4/0x4f50 drivers/usb/core/hub.c:5871
process_one_work+0x889/0x15e0 kernel/workqueue.c:2631
process_scheduled_works kernel/workqueue.c:2704 [inline]
worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2785
kthread+0x2c6/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293
</TASK>
Showing all locks held in the system:
3 locks held by kworker/0:1/9:
#0: ffff888109ba9138 ((wq_completion)ipv6_addrconf){+.+.}-{0:0}, at: process_one_work+0x789/0x15e0 kernel/workqueue.c:2606
#1: ffffc9000009fd80 ((work_completion)(&(&net->ipv6.addr_chk_work)->work)){+.+.}-{0:0}, at: process_one_work+0x7eb/0x15e0 kernel/workqueue.c:2607
#2: ffffffff89ad6da8 (rtnl_mutex){+.+.}-{3:3}, at: addrconf_verify_work+0x12/0x30 net/ipv6/addrconf.c:4684
6 locks held by kworker/1:1/28:
#0: ffff88810a64fd38 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x789/0x15e0 kernel/workqueue.c:2606
#1: ffffc900001e7d80 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x7eb/0x15e0 kernel/workqueue.c:2607
#2: ffff888104f2b190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:992 [inline]
#2: ffff888104f2b190 (&dev->mutex){....}-{3:3}, at: hub_event+0x1be/0x4f50 drivers/usb/core/hub.c:5817
#3: ffff888114cd9190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:992 [inline]
#3: ffff888114cd9190 (&dev->mutex){....}-{3:3}, at: usb_disconnect+0x10a/0x890 drivers/usb/core/hub.c:2267
#4: ffff888100f5b160 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:992 [inline]
#4: ffff888100f5b160 (&dev->mutex){....}-{3:3}, at: __device_driver_lock drivers/base/dd.c:1095 [inline]
#4: ffff888100f5b160 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0xa4/0x610 drivers/base/dd.c:1292
#5: ffffffff89ad6da8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0x12/0x30 net/core/dev.c:11102
1 lock held by khungtaskd/29:
#0: ffffffff888aece0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:334 [inline]
#0: ffffffff888aece0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:786 [inline]
#0: ffffffff888aece0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x75/0x340 kernel/locking/lockdep.c:6614
1 lock held by kworker/u4:7/1043:
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested kernel/sched/core.c:558 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock kernel/sched/sched.h:1375 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: rq_lock kernel/sched/sched.h:1684 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x290/0x30d0 kernel/sched/core.c:6613
3 locks held by kworker/1:2/1939:
#0: ffff888109ba9138 ((wq_completion)ipv6_addrconf){+.+.}-{0:0}, at: process_one_work+0x789/0x15e0 kernel/workqueue.c:2606
#1: ffffc9000393fd80 ((work_completion)(&(&net->ipv6.addr_chk_work)->work)){+.+.}-{0:0}, at: process_one_work+0x7eb/0x15e0 kernel/workqueue.c:2607
#2: ffffffff89ad6da8 (rtnl_mutex){+.+.}-{3:3}, at: addrconf_verify_work+0x12/0x30 net/ipv6/addrconf.c:4684
1 lock held by klogd/2494:
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested kernel/sched/core.c:558 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock kernel/sched/sched.h:1375 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: rq_lock kernel/sched/sched.h:1684 [inline]
#0: ffff8881f653b318 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x290/0x30d0 kernel/sched/core.c:6613
2 locks held by dhcpcd/2543:
#0: ffffffff89ad6da8 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x1d3/0x1f10 net/ipv4/devinet.c:1091
#1: ffff88811928cdb0 (&padapter->mutex_start){+.+.}-{3:3}, at: netdev_open+0x32/0x840 drivers/staging/rtl8712/os_intfs.c:392
2 locks held by getty/2563:
#0: ffff88810af530a0 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 drivers/tty/tty_ldisc.c:243
#1: ffffc900000432f0 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0xfc9/0x1480 drivers/tty/n_tty.c:2216
=============================================
NMI backtrace for cpu 0
CPU: 0 PID: 29 Comm: khungtaskd Not tainted 6.6.44-syzkaller-g721391060066-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
nmi_cpu_backtrace+0x27b/0x390 lib/nmi_backtrace.c:113
nmi_trigger_cpumask_backtrace+0x29c/0x300 lib/nmi_backtrace.c:62
trigger_all_cpu_backtrace include/linux/nmi.h:160 [inline]
check_hung_uninterruptible_tasks kernel/hung_task.c:222 [inline]
watchdog+0xf87/0x1210 kernel/hung_task.c:379
kthread+0x2c6/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293
</TASK>
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1 skipped: idling at native_safe_halt arch/x86/include/asm/irqflags.h:48 [inline]
NMI backtrace for cpu 1 skipped: idling at arch_safe_halt arch/x86/include/asm/irqflags.h:86 [inline]
NMI backtrace for cpu 1 skipped: idling at acpi_safe_halt+0x1b/0x30 drivers/acpi/processor_idle.c:111
Tested on:
commit: 72139106 Linux 6.6.44
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git linux-6.6.y
console output: https://syzkaller.appspot.com/x/log.txt?x=17be7b65980000
kernel config: https://syzkaller.appspot.com/x/.config?x=cc2e57d9f035477b
dashboard link: https://syzkaller.appspot.com/bug?extid=ca2eaaadab55de6a5a42
compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=11be7b65980000
next prev parent reply other threads:[~2024-08-03 14:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-03 3:01 [syzbot] [staging?] [usb?] WARNING in r8712_usb_write_mem/usb_submit_urb (2) syzbot
2024-08-03 13:55 ` Nam Cao
2024-08-03 14:06 ` syzbot
2024-08-03 14:24 ` Nam Cao
2024-08-03 14:35 ` syzbot [this message]
2024-08-03 15:11 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00000000000061c8a0061ec859b5@google.com \
--to=syzbot+ca2eaaadab55de6a5a42@syzkaller.appspotmail.com \
--cc=florian.c.schilhabel@googlemail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=namcao@linutronix.de \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.