From: syzbot <syzbot+88c042e36cde4bcbd19b@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: bpf-next boot error: WARNING: workqueue cpumask: online intersect > possible intersect (2)
Date: Mon, 22 Jul 2019 23:38:07 -0700 [thread overview]
Message-ID: <0000000000007cb5e7058e536fbe@google.com> (raw)
Hello,
syzbot found the following crash on:
HEAD commit: 66b5f1c4 net-ipv6-ndisc: add support for RFC7710 RA Captiv..
git tree: bpf-next
console output: https://syzkaller.appspot.com/x/log.txt?x=15513e78600000
kernel config: https://syzkaller.appspot.com/x/.config?x=9aec8cb13b5f7389
dashboard link: https://syzkaller.appspot.com/bug?extid=88c042e36cde4bcbd19b
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
Unfortunately, I don't have any reproducer for this crash yet.
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+88c042e36cde4bcbd19b@syzkaller.appspotmail.com
smpboot: CPU0: Intel(R) Xeon(R) CPU @ 2.30GHz (family: 0x6, model: 0x3f,
stepping: 0x0)
Performance Events: unsupported p6 CPU model 63 no PMU driver, software
events only.
rcu: Hierarchical SRCU implementation.
NMI watchdog: Perf NMI watchdog permanently disabled
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for
more details.
smp: Brought up 2 nodes, 2 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 2 processors activated (9200.00 BogoMIPS)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
19112604462750000 ns
futex hash table entries: 512 (order: 4, 65536 bytes, vmalloc)
xor: automatically using best checksumming function avx
PM: RTC time: 00:21:51, date: 2019-07-23
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
cpuidle: using governor menu
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
WARNING: workqueue cpumask: online intersect > possible intersect
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
raid6: avx2x4 gen() 12057 MB/s
raid6: avx2x4 xor() 6485 MB/s
raid6: avx2x2 gen() 5976 MB/s
raid6: avx2x2 xor() 3848 MB/s
raid6: avx2x1 gen() 921 MB/s
raid6: avx2x1 xor() 2173 MB/s
raid6: sse2x4 gen() 6202 MB/s
raid6: sse2x4 xor() 3397 MB/s
raid6: sse2x2 gen() 3875 MB/s
raid6: sse2x2 xor() 1961 MB/s
raid6: sse2x1 gen() 789 MB/s
raid6: sse2x1 xor() 964 MB/s
raid6: using algorithm avx2x4 gen() 12057 MB/s
raid6: .... xor() 6485 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: Enabled 16 GPEs in block 00 to 0F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended
PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7110] type 00 class 0x060100
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:03.0: [1af4:1004] type 00 class 0x000000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc03f]
pci 0000:00:03.0: reg 0x14: [mem 0xfebfe000-0xfebfe07f]
pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
pci 0000:00:04.0: reg 0x14: [mem 0xfebff000-0xfebff07f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
*** VALIDATE hugetlbfs ***
CacheFiles: Loaded
TOMOYO: 2.6.0
Mandatory Access Control activated.
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns:
2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 294912 bytes,
vmalloc)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, vmalloc)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, vmalloc)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 7, 655360 bytes, vmalloc)
UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes, vmalloc)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NET: Registered protocol family 44
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
PCI: CLS 0 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xaa800000-0xae800000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl
timer
kvm: already loaded the other module
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212735223b2,
max_idle_ns: 440795277976 ns
clocksource: Switched to clocksource tsc
mce: Machine check injector initialized
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
DLM installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ntfs: driver 2.1.32 [Flags: R/W].
fuse: init (API version 7.31)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, no debug enabled
9p: Installing v9fs 9p2000 file system support
FS-Cache: Netfs '9p' registered for caching
gfs2: GFS2 installed
FS-Cache: Netfs 'ceph' registered for caching
ceph: loaded (mds proto 32)
NET: Registered protocol family 38
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Asymmetric key parser 'pkcs8' registered
Key type pkcs7_test registered
Asymmetric key parser 'tpm_parser' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ioatdma: Intel(R) QuickData Technology Driver 5.00
PCI Interrupt Link [LNKC] enabled at IRQ 11
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
PCI Interrupt Link [LNKD] enabled at IRQ 10
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
usbcore: registered new interface driver udl
brd: module loaded
loop: module loaded
zram: Added device: zram0
null: module loaded
nfcsim 0.2 initialized
Loading iSCSI transport class v2.0-870.
scsi host0: Virtio SCSI HBA
st: Version 20160209, fixed bufsize 32768, s/g segs 256
kobject: 'sd' (00000000062140f2): kobject_uevent_env
kobject: 'sd' (00000000062140f2): fill_kobj_path: path
= '/bus/scsi/drivers/sd'
kobject: 'sr' (00000000ef64c50b): kobject_add_internal: parent: 'drivers',
set: 'drivers'
kobject: 'sr' (00000000ef64c50b): kobject_uevent_env
kobject: 'sr' (00000000ef64c50b): fill_kobj_path: path
= '/bus/scsi/drivers/sr'
kobject: 'scsi_generic' (00000000007b57bc): kobject_add_internal:
parent: 'class', set: 'class'
kobject: 'scsi_generic' (00000000007b57bc): kobject_uevent_env
kobject: 'scsi_generic' (00000000007b57bc): fill_kobj_path: path
= '/class/scsi_generic'
kobject: 'nvme-wq' (00000000b79e19cd): kobject_add_internal:
parent: 'workqueue', set: 'devices'
kobject: 'nvme-wq' (00000000b79e19cd): kobject_uevent_env
kobject: 'nvme-wq' (00000000b79e19cd): kobject_uevent_env: uevent_suppress
caused the event to drop!
kobject: 'nvme-wq' (00000000b79e19cd): kobject_uevent_env
kobject: 'nvme-wq' (00000000b79e19cd): fill_kobj_path: path
= '/devices/virtual/workqueue/nvme-wq'
kobject: 'nvme-reset-wq' (0000000070597663): kobject_add_internal:
parent: 'workqueue', set: 'devices'
kobject: 'nvme-reset-wq' (0000000070597663): kobject_uevent_env
kobject: 'nvme-reset-wq' (0000000070597663): kobject_uevent_env:
uevent_suppress caused the event to drop!
kobject: 'nvme-reset-wq' (0000000070597663): kobject_uevent_env
kobject: 'nvme-reset-wq' (0000000070597663): fill_kobj_path: path
= '/devices/virtual/workqueue/nvme-reset-wq'
kobject: 'nvme-delete-wq' (00000000c9ed28dd): kobject_add_internal:
parent: 'workqueue', set: 'devices'
kobject: 'nvme-delete-wq' (00000000c9ed28dd): kobject_uevent_env
kobject: 'nvme-delete-wq' (00000000c9ed28dd): kobject_uevent_env:
uevent_suppress caused the event to drop!
kobject: 'nvme-delete-wq' (00000000c9ed28dd): kobject_uevent_env
kobject: 'nvme-delete-wq' (00000000c9ed28dd): fill_kobj_path: path
= '/devices/virtual/workqueue/nvme-delete-wq'
---
This bug is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this bug report. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
next reply other threads:[~2019-07-23 6:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-23 6:38 syzbot [this message]
2019-07-24 17:36 ` bpf-next boot error: WARNING: workqueue cpumask: online intersect > possible intersect (2) Eric Biggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0000000000007cb5e7058e536fbe@google.com \
--to=syzbot+88c042e36cde4bcbd19b@syzkaller.appspotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.