From: syzbot <syzbot+8b304fd3170053b5307b@syzkaller.appspotmail.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
rafael@kernel.org, syzkaller-bugs@googlegroups.com
Subject: [syzbot] upstream boot error: general protection fault in driver_register
Date: Tue, 16 Aug 2022 01:35:29 -0700 [thread overview]
Message-ID: <00000000000082da7c05e657a15a@google.com> (raw)
Hello,
syzbot found the following issue on:
HEAD commit: 568035b01cfb Linux 6.0-rc1
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=176d627b080000
kernel config: https://syzkaller.appspot.com/x/.config?x=3b9175e0879a7749
dashboard link: https://syzkaller.appspot.com/bug?extid=8b304fd3170053b5307b
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+8b304fd3170053b5307b@syzkaller.appspotmail.com
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: button: Sleep Button [SLPF]
ACPI: \_SB_.LNKC: Enabled at IRQ 11
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKD: Enabled at IRQ 10
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKB: Enabled at IRQ 10
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
N_HDLC line discipline registered with maxframe=4096
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
usbcore: registered new interface driver udl
brd: module loaded
loop: module loaded
zram: Added device: zram0
null_blk: disk nullb0 created
null_blk: module loaded
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=120)
Initialized host personality
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver viperboard
usbcore: registered new interface driver dln2
usbcore: registered new interface driver pn533_usb
nfcsim 0.2 initialized
usbcore: registered new interface driver port100
usbcore: registered new interface driver nfcmrvl
Loading iSCSI transport class v2.0-870.
scsi host0: Virtio SCSI HBA
st: Version 20160209, fixed bufsize 32768, s/g segs 256
Rounding down aligned max_sectors from 4294967295 to 4294967288
db_root: cannot open: /etc/target
slram: not enough parameters.
ftl_cs: FTL header not found.
wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
MACsec IEEE 802.1AE
tun: Universal TUN/TAP device driver, 1.6
general protection fault, probably for non-canonical address 0xffff000000000800: 0000 [#1] PREEMPT SMP KASAN
KASAN: maybe wild-memory-access in range [0xfff8200000004000-0xfff8200000004007]
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:freelist_dereference mm/slub.c:347 [inline]
RIP: 0010:get_freepointer mm/slub.c:354 [inline]
RIP: 0010:get_freepointer_safe mm/slub.c:368 [inline]
RIP: 0010:slab_alloc_node mm/slub.c:3211 [inline]
RIP: 0010:slab_alloc mm/slub.c:3251 [inline]
RIP: 0010:kmem_cache_alloc_trace+0x164/0x3e0 mm/slub.c:3282
Code: 8b 51 08 48 8b 01 48 83 79 10 00 48 89 44 24 08 0f 84 bf 01 00 00 48 85 c0 0f 84 b6 01 00 00 48 8b 7d 00 8b 4d 28 40 f6 c7 0f <48> 8b 1c 08 0f 85 c2 01 00 00 48 8d 4a 08 65 48 0f c7 0f 0f 94 c0
RSP: 0000:ffffc90000067ce8 EFLAGS: 00010246
RAX: ffff000000000000 RBX: 0000000000000000 RCX: 0000000000000800
RDX: 0000000000002d90 RSI: 0000000000000dc0 RDI: 000000000003dce0
RBP: ffff888011842140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000dc0 R14: 0000000000000a20 R15: 0000000000000dc0
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
kmalloc include/linux/slab.h:600 [inline]
kzalloc include/linux/slab.h:733 [inline]
kobject_uevent_env+0x230/0x1640 lib/kobject_uevent.c:524
driver_register+0x2db/0x3a0 drivers/base/driver.c:248
virtio_net_driver_init+0x93/0xd2 drivers/net/virtio_net.c:4108
do_one_initcall+0xfe/0x650 init/main.c:1296
do_initcall_level init/main.c:1369 [inline]
do_initcalls init/main.c:1385 [inline]
do_basic_setup init/main.c:1404 [inline]
kernel_init_freeable+0x6b1/0x73a init/main.c:1611
kernel_init+0x1a/0x1d0 init/main.c:1500
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:freelist_dereference mm/slub.c:347 [inline]
RIP: 0010:get_freepointer mm/slub.c:354 [inline]
RIP: 0010:get_freepointer_safe mm/slub.c:368 [inline]
RIP: 0010:slab_alloc_node mm/slub.c:3211 [inline]
RIP: 0010:slab_alloc mm/slub.c:3251 [inline]
RIP: 0010:kmem_cache_alloc_trace+0x164/0x3e0 mm/slub.c:3282
Code: 8b 51 08 48 8b 01 48 83 79 10 00 48 89 44 24 08 0f 84 bf 01 00 00 48 85 c0 0f 84 b6 01 00 00 48 8b 7d 00 8b 4d 28 40 f6 c7 0f <48> 8b 1c 08 0f 85 c2 01 00 00 48 8d 4a 08 65 48 0f c7 0f 0f 94 c0
RSP: 0000:ffffc90000067ce8 EFLAGS: 00010246
RAX: ffff000000000000 RBX: 0000000000000000 RCX: 0000000000000800
RDX: 0000000000002d90 RSI: 0000000000000dc0 RDI: 000000000003dce0
RBP: ffff888011842140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000dc0 R14: 0000000000000a20 R15: 0000000000000dc0
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
----------------
Code disassembly (best guess):
0: 8b 51 08 mov 0x8(%rcx),%edx
3: 48 8b 01 mov (%rcx),%rax
6: 48 83 79 10 00 cmpq $0x0,0x10(%rcx)
b: 48 89 44 24 08 mov %rax,0x8(%rsp)
10: 0f 84 bf 01 00 00 je 0x1d5
16: 48 85 c0 test %rax,%rax
19: 0f 84 b6 01 00 00 je 0x1d5
1f: 48 8b 7d 00 mov 0x0(%rbp),%rdi
23: 8b 4d 28 mov 0x28(%rbp),%ecx
26: 40 f6 c7 0f test $0xf,%dil
* 2a: 48 8b 1c 08 mov (%rax,%rcx,1),%rbx <-- trapping instruction
2e: 0f 85 c2 01 00 00 jne 0x1f6
34: 48 8d 4a 08 lea 0x8(%rdx),%rcx
38: 65 48 0f c7 0f cmpxchg16b %gs:(%rdi)
3d: 0f 94 c0 sete %al
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
reply other threads:[~2022-08-16 9:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00000000000082da7c05e657a15a@google.com \
--to=syzbot+8b304fd3170053b5307b@syzkaller.appspotmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.