From: syzbot <syzbot+dde7e853812ed57835ea@syzkaller.appspotmail.com>
To: 18801353760@163.com, clm@fb.com, dsterba@suse.com,
josef@toxicpanda.com, linux-btrfs@vger.kernel.org,
linux-kernel@vger.kernel.org, llvm@lists.linux.dev,
nathan@kernel.org, ndesaulniers@google.com,
syzkaller-bugs@googlegroups.com, trix@redhat.com,
yin31149@gmail.com
Subject: Re: [syzbot] WARNING in btrfs_block_rsv_release
Date: Fri, 28 Oct 2022 07:02:19 -0700 [thread overview]
Message-ID: <000000000000c5461a05ec18b4e6@google.com> (raw)
In-Reply-To: <20221028111321.45437-1-yin31149@gmail.com>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
00
[ 10.626735][ T1] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 10.628295][ T1] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 10.630010][ T1] IPVS: ipvs loaded.
[ 10.630584][ T1] IPVS: [rr] scheduler registered.
[ 10.631355][ T1] IPVS: [wrr] scheduler registered.
[ 10.632191][ T1] IPVS: [lc] scheduler registered.
[ 10.632912][ T1] IPVS: [wlc] scheduler registered.
[ 10.633714][ T1] IPVS: [fo] scheduler registered.
[ 10.634448][ T1] IPVS: [ovf] scheduler registered.
[ 10.635695][ T1] IPVS: [lblc] scheduler registered.
[ 10.636621][ T1] IPVS: [lblcr] scheduler registered.
[ 10.637562][ T1] IPVS: [dh] scheduler registered.
[ 10.638341][ T1] IPVS: [sh] scheduler registered.
[ 10.639064][ T1] IPVS: [mh] scheduler registered.
[ 10.639829][ T1] IPVS: [sed] scheduler registered.
[ 10.640648][ T1] IPVS: [nq] scheduler registered.
[ 10.641358][ T1] IPVS: [twos] scheduler registered.
[ 10.642344][ T1] IPVS: [sip] pe registered.
[ 10.643158][ T1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 10.646785][ T1] gre: GRE over IPv4 demultiplexor driver
[ 10.647988][ T1] ip_gre: GRE over IPv4 tunneling driver
[ 10.657614][ T1] IPv4 over IPsec tunneling driver
[ 10.661973][ T1] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 10.663721][ T1] Initializing XFRM netlink socket
[ 10.664715][ T1] IPsec XFRM device driver
[ 10.667985][ T1] NET: Registered PF_INET6 protocol family
[ 10.681339][ T1] Segment Routing with IPv6
[ 10.682209][ T1] RPL Segment Routing with IPv6
[ 10.683200][ T1] In-situ OAM (IOAM) with IPv6
[ 10.684506][ T1] mip6: Mobile IPv6
[ 10.688852][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 10.697537][ T1] ip6_gre: GRE over IPv6 tunneling driver
[ 10.702064][ T1] NET: Registered PF_PACKET protocol family
[ 10.702972][ T1] NET: Registered PF_KEY protocol family
[ 10.704733][ T1] Bridge firewalling registered
[ 10.706424][ T1] NET: Registered PF_X25 protocol family
[ 10.707669][ T1] X25: Linux Version 0.2
[ 10.752465][ T1] NET: Registered PF_NETROM protocol family
[ 10.784421][ T2696] kworker/u4:1 (2696) used greatest stack depth: 21784 bytes left
[ 10.796283][ T1] NET: Registered PF_ROSE protocol family
[ 10.797639][ T1] NET: Registered PF_AX25 protocol family
[ 10.798728][ T1] can: controller area network core
[ 10.800391][ T1] NET: Registered PF_CAN protocol family
[ 10.801334][ T1] can: raw protocol
[ 10.802160][ T1] can: broadcast manager protocol
[ 10.803237][ T1] can: netlink gateway - max_hops=1
[ 10.806626][ T1] can: SAE J1939
[ 10.807406][ T1] can: isotp protocol
[ 10.808488][ T1] Bluetooth: RFCOMM TTY layer initialized
[ 10.809368][ T1] Bluetooth: RFCOMM socket layer initialized
[ 10.810432][ T1] Bluetooth: RFCOMM ver 1.11
[ 10.811200][ T1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.812344][ T1] Bluetooth: BNEP filters: protocol multicast
[ 10.813472][ T1] Bluetooth: BNEP socket layer initialized
[ 10.814580][ T1] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[ 10.816401][ T1] Bluetooth: CMTP socket layer initialized
[ 10.817384][ T1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 10.818502][ T1] Bluetooth: HIDP socket layer initialized
[ 10.824139][ T1] NET: Registered PF_RXRPC protocol family
[ 10.825345][ T1] Key type rxrpc registered
[ 10.826078][ T1] Key type rxrpc_s registered
[ 10.828240][ T1] NET: Registered PF_KCM protocol family
[ 10.829783][ T1] lec:lane_module_init: lec.c: initialized
[ 10.830626][ T1] mpoa:atm_mpoa_init: mpc.c: initialized
[ 10.831616][ T1] l2tp_core: L2TP core driver, V2.0
[ 10.832528][ T1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 10.833478][ T1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 10.834838][ T1] l2tp_netlink: L2TP netlink interface
[ 10.836503][ T1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 10.837696][ T1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 10.839207][ T1] NET: Registered PF_PHONET protocol family
[ 10.841155][ T1] 8021q: 802.1Q VLAN Support v1.8
[ 10.862660][ T1] DCCP: Activated CCID 2 (TCP-like)
[ 10.864236][ T1] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[ 10.868242][ T1] sctp: Hash tables configured (bind 32/56)
[ 10.871963][ T1] NET: Registered PF_RDS protocol family
[ 10.874058][ T1] Registered RDS/infiniband transport
[ 10.876434][ T1] Registered RDS/tcp transport
[ 10.877245][ T1] tipc: Activated (version 2.0.0)
[ 10.878883][ T1] NET: Registered PF_TIPC protocol family
[ 10.880418][ T1] tipc: Started in single node mode
[ 10.882583][ T1] NET: Registered PF_SMC protocol family
[ 10.883886][ T1] 9pnet: Installing 9P2000 support
[ 10.885340][ T1] NET: Registered PF_CAIF protocol family
[ 10.893240][ T1] NET: Registered PF_IEEE802154 protocol family
[ 10.894764][ T1] Key type dns_resolver registered
[ 10.895597][ T1] Key type ceph registered
[ 10.897286][ T1] libceph: loaded (mon/osd proto 15/24)
[ 10.900756][ T1] batman_adv: B.A.T.M.A.N. advanced 2022.3 (compatibility version 15) loaded
[ 10.902106][ T1] openvswitch: Open vSwitch switching datapath
[ 10.905615][ T1] ------------[ cut here ]------------
[ 10.906603][ T1] WARNING: CPU: 0 PID: 1 at net/netlink/genetlink.c:383 genl_register_family+0x13c0/0x1540
[ 10.908115][ T1] Modules linked in:
[ 10.908691][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc2-syzkaller-00189-g23758867219c-dirty #0
[ 10.910145][ T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
[ 10.911770][ T1] RIP: 0010:genl_register_family+0x13c0/0x1540
[ 10.912959][ T1] Code: 5d 41 5e 41 5f 5d c3 e8 fe 71 1b f9 0f 0b 41 be ea ff ff ff eb a2 e8 ef 71 1b f9 0f 0b 41 be ea ff ff ff eb 93 e8 e0 71 1b f9 <0f> 0b 41 be ea ff ff ff eb 84 44 89 e1 80 e1 07 38 c1 0f 8c bd ec
[ 10.915895][ T1] RSP: 0000:ffffc90000067820 EFLAGS: 00010293
[ 10.916967][ T1] RAX: ffffffff886c5e00 RBX: 0000000000000001 RCX: ffff888140170000
[ 10.918151][ T1] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000000
[ 10.919312][ T1] RBP: ffffc90000067950 R08: ffffffff886c4e33 R09: fffffbfff1c1b606
[ 10.920882][ T1] R10: fffffbfff1c1b606 R11: 1ffffffff1c1b605 R12: dffffc0000000000
[ 10.922497][ T1] R13: ffffffff8c582448 R14: 0000000000000000 R15: 0000000000000003
[ 10.924081][ T1] FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
[ 10.925774][ T1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 10.926982][ T1] CR2: ffff88823ffff000 CR3: 000000000c88e000 CR4: 00000000003506f0
[ 10.928082][ T1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 10.929173][ T1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 10.930397][ T1] Call Trace:
[ 10.931035][ T1] <TASK>
[ 10.931558][ T1] ? nlmsg_trim+0xa0/0xa0
[ 10.932566][ T1] ? genl_unlock+0x20/0x20
[ 10.933372][ T1] dp_register_genl+0x40/0x136
[ 10.934400][ T1] dp_init+0x11a/0x140
[ 10.935312][ T1] ? psample_module_init+0x11/0x11
[ 10.936082][ T1] do_one_initcall+0x1c9/0x400
[ 10.936955][ T1] ? IS_ERR_OR_NULL+0x20/0x20
[ 10.937621][ T1] ? lockdep_hardirqs_on_prepare+0x428/0x790
[ 10.939048][ T1] ? print_irqtrace_events+0x220/0x220
[ 10.939975][ T1] ? asm_sysvec_reschedule_ipi+0x16/0x20
[ 10.941100][ T1] ? lockdep_hardirqs_on+0x8d/0x130
[ 10.942031][ T1] ? asm_sysvec_reschedule_ipi+0x16/0x20
[ 10.942955][ T1] ? parameq+0xba/0x210
[ 10.943611][ T1] ? strlen+0x41/0x60
[ 10.944217][ T1] ? parameq+0x198/0x210
[ 10.944962][ T1] ? parse_one+0x141/0x520
[ 10.945749][ T1] ? do_initcall_level+0x218/0x218
[ 10.946940][ T1] ? ignore_unknown_bootoption+0x5/0x8
[ 10.948340][ T1] ? parse_args+0x4e1/0x590
[ 10.949153][ T1] ? rcu_read_lock_sched_held+0x87/0x110
[ 10.950180][ T1] ? __bpf_trace_rcu_stall_warning+0x10/0x10
[ 10.951083][ T1] ? rcu_read_lock_sched_held+0x87/0x110
[ 10.952908][ T1] ? __bpf_trace_rcu_stall_warning+0x10/0x10
[ 10.953863][ T1] do_initcall_level+0x168/0x218
[ 10.954847][ T1] do_initcalls+0x4b/0x8c
[ 10.955707][ T1] kernel_init_freeable+0x428/0x5d5
[ 10.957030][ T1] ? report_meminit+0x64/0x64
[ 10.957791][ T1] ? _raw_spin_lock_irq+0xba/0xf0
[ 10.958675][ T1] ? do_raw_spin_unlock+0x134/0x8a0
[ 10.959494][ T1] ? _raw_spin_unlock_irq+0x1f/0x40
[ 10.960315][ T1] ? lockdep_hardirqs_on+0x8d/0x130
[ 10.961095][ T1] ? rest_init+0x270/0x270
[ 10.961718][ T1] kernel_init+0x19/0x2b0
[ 10.962440][ T1] ? rest_init+0x270/0x270
[ 10.963209][ T1] ret_from_fork+0x1f/0x30
[ 10.964022][ T1] </TASK>
[ 10.964468][ T1] Kernel panic - not syncing: panic_on_warn set ...
[ 10.965668][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc2-syzkaller-00189-g23758867219c-dirty #0
[ 10.965668][ T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
[ 10.965668][ T1] Call Trace:
[ 10.965668][ T1] <TASK>
[ 10.965668][ T1] dump_stack_lvl+0x1b1/0x28e
[ 10.965668][ T1] ? nf_tcp_handle_invalid+0x62e/0x62e
[ 10.965668][ T1] ? panic+0x710/0x710
[ 10.965668][ T1] ? vscnprintf+0x59/0x80
[ 10.965668][ T1] ? genl_register_family+0x13c0/0x1540
[ 10.965668][ T1] panic+0x2d6/0x710
[ 10.965668][ T1] ? __warn+0x131/0x220
[ 10.965668][ T1] ? memcpy_page_flushcache+0xfc/0xfc
[ 10.965668][ T1] ? ret_from_fork+0x1f/0x30
[ 10.965668][ T1] ? genl_register_family+0x13c0/0x1540
[ 10.965668][ T1] __warn+0x1fa/0x220
[ 10.965668][ T1] ? genl_register_family+0x13c0/0x1540
[ 10.965668][ T1] report_bug+0x1b3/0x2d0
[ 10.965668][ T1] handle_bug+0x3d/0x70
[ 10.965668][ T1] exc_invalid_op+0x16/0x40
[ 10.965668][ T1] asm_exc_invalid_op+0x16/0x20
[ 10.965668][ T1] RIP: 0010:genl_register_family+0x13c0/0x1540
[ 10.965668][ T1] Code: 5d 41 5e 41 5f 5d c3 e8 fe 71 1b f9 0f 0b 41 be ea ff ff ff eb a2 e8 ef 71 1b f9 0f 0b 41 be ea ff ff ff eb 93 e8 e0 71 1b f9 <0f> 0b 41 be ea ff ff ff eb 84 44 89 e1 80 e1 07 38 c1 0f 8c bd ec
[ 10.965668][ T1] RSP: 0000:ffffc90000067820 EFLAGS: 00010293
[ 10.965668][ T1] RAX: ffffffff886c5e00 RBX: 0000000000000001 RCX: ffff888140170000
[ 10.965668][ T1] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000000
[ 10.965668][ T1] RBP: ffffc90000067950 R08: ffffffff886c4e33 R09: fffffbfff1c1b606
[ 10.965668][ T1] R10: fffffbfff1c1b606 R11: 1ffffffff1c1b605 R12: dffffc0000000000
[ 10.965668][ T1] R13: ffffffff8c582448 R14: 0000000000000000 R15: 0000000000000003
[ 10.965668][ T1] ? genl_register_family+0x3f3/0x1540
[ 10.965668][ T1] ? genl_register_family+0x13c0/0x1540
[ 10.965668][ T1] ? nlmsg_trim+0xa0/0xa0
[ 10.965668][ T1] ? genl_unlock+0x20/0x20
[ 10.965668][ T1] dp_register_genl+0x40/0x136
[ 10.965668][ T1] dp_init+0x11a/0x140
[ 10.965668][ T1] ? psample_module_init+0x11/0x11
[ 10.965668][ T1] do_one_initcall+0x1c9/0x400
[ 10.965668][ T1] ? IS_ERR_OR_NULL+0x20/0x20
[ 10.965668][ T1] ? lockdep_hardirqs_on_prepare+0x428/0x790
[ 10.965668][ T1] ? print_irqtrace_events+0x220/0x220
[ 10.965668][ T1] ? asm_sysvec_reschedule_ipi+0x16/0x20
[ 10.965668][ T1] ? lockdep_hardirqs_on+0x8d/0x130
[ 10.965668][ T1] ? asm_sysvec_reschedule_ipi+0x16/0x20
[ 10.965668][ T1] ? parameq+0xba/0x210
[ 10.965668][ T1] ? strlen+0x41/0x60
[ 10.965668][ T1] ? parameq+0x198/0x210
[ 10.965668][ T1] ? parse_one+0x141/0x520
[ 10.965668][ T1] ? do_initcall_level+0x218/0x218
[ 10.965668][ T1] ? ignore_unknown_bootoption+0x5/0x8
[ 10.965668][ T1] ? parse_args+0x4e1/0x590
[ 10.965668][ T1] ? rcu_read_lock_sched_held+0x87/0x110
[ 10.965668][ T1] ? __bpf_trace_rcu_stall_warning+0x10/0x10
[ 10.965668][ T1] ? rcu_read_lock_sched_held+0x87/0x110
[ 10.965668][ T1] ? __bpf_trace_rcu_stall_warning+0x10/0x10
[ 10.965668][ T1] do_initcall_level+0x168/0x218
[ 10.965668][ T1] do_initcalls+0x4b/0x8c
[ 10.965668][ T1] kernel_init_freeable+0x428/0x5d5
[ 10.965668][ T1] ? report_meminit+0x64/0x64
[ 10.965668][ T1] ? _raw_spin_lock_irq+0xba/0xf0
[ 10.965668][ T1] ? do_raw_spin_unlock+0x134/0x8a0
[ 10.965668][ T1] ? _raw_spin_unlock_irq+0x1f/0x40
[ 10.965668][ T1] ? lockdep_hardirqs_on+0x8d/0x130
[ 10.965668][ T1] ? rest_init+0x270/0x270
[ 10.965668][ T1] kernel_init+0x19/0x2b0
[ 10.965668][ T1] ? rest_init+0x270/0x270
[ 10.965668][ T1] ret_from_fork+0x1f/0x30
[ 10.965668][ T1] </TASK>
[ 10.965668][ T1] Kernel Offset: disabled
[ 10.965668][ T1] Rebooting in 86400 seconds..
syzkaller build log:
go env (err=<nil>)
GO111MODULE="auto"
GOARCH="amd64"
GOBIN=""
GOCACHE="/syzkaller/.cache/go-build"
GOENV="/syzkaller/.config/go/env"
GOEXE=""
GOEXPERIMENT=""
GOFLAGS=""
GOHOSTARCH="amd64"
GOHOSTOS="linux"
GOINSECURE=""
GOMODCACHE="/syzkaller/jobs/linux/gopath/pkg/mod"
GONOPROXY=""
GONOSUMDB=""
GOOS="linux"
GOPATH="/syzkaller/jobs/linux/gopath"
GOPRIVATE=""
GOPROXY="https://proxy.golang.org,direct"
GOROOT="/usr/local/go"
GOSUMDB="sum.golang.org"
GOTMPDIR=""
GOTOOLDIR="/usr/local/go/pkg/tool/linux_amd64"
GOVCS=""
GOVERSION="go1.17"
GCCGO="gccgo"
AR="ar"
CC="gcc"
CXX="g++"
CGO_ENABLED="1"
GOMOD="/syzkaller/jobs/linux/gopath/src/github.com/google/syzkaller/go.mod"
CGO_CFLAGS="-g -O2"
CGO_CPPFLAGS=""
CGO_CXXFLAGS="-g -O2"
CGO_FFLAGS="-g -O2"
CGO_LDFLAGS="-g -O2"
PKG_CONFIG="pkg-config"
GOGCCFLAGS="-fPIC -m64 -pthread -fmessage-length=0 -fdebug-prefix-map=/tmp/go-build1720647648=/tmp/go-build -gno-record-gcc-switches"
git status (err=<nil>)
HEAD detached at a0fd4dab4
nothing to commit, working tree clean
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:32: run command via tools/syz-env for best compatibility, see:
Makefile:33: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' ./sys/syz-sysgen | grep -q false || go install ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=a0fd4dab4eac71d7b3237bb1000352206a6a82f5 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221020-182546'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-fuzzer github.com/google/syzkaller/syz-fuzzer
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=a0fd4dab4eac71d7b3237bb1000352206a6a82f5 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221020-182546'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=a0fd4dab4eac71d7b3237bb1000352206a6a82f5 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221020-182546'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-stress github.com/google/syzkaller/tools/syz-stress
mkdir -p ./bin/linux_amd64
gcc -o ./bin/linux_amd64/syz-executor executor/executor.cc \
-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -static-pie -fpermissive -w -DGOOS_linux=1 -DGOARCH_amd64=1 \
-DHOSTGOOS_linux=1 -DGIT_REVISION=\"a0fd4dab4eac71d7b3237bb1000352206a6a82f5\"
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=15b1c4ca880000
Tested on:
commit: 23758867 Merge tag 'net-6.1-rc3-2' of git://git.kernel..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
kernel config: https://syzkaller.appspot.com/x/.config?x=1d3548a4365ba17d
dashboard link: https://syzkaller.appspot.com/bug?extid=dde7e853812ed57835ea
compiler: Debian clang version 13.0.1-++20220126092033+75e33f71c2da-1~exp1~20220126212112.63, GNU ld (GNU Binutils for Debian) 2.35.2
patch: https://syzkaller.appspot.com/x/patch.diff?x=14540cfc880000
next prev parent reply other threads:[~2022-10-28 14:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 4:45 [syzbot] WARNING in btrfs_block_rsv_release syzbot
2022-10-28 11:13 ` Hawkins Jiawei
2022-10-28 14:02 ` syzbot [this message]
2022-10-28 15:05 ` Hawkins Jiawei
2022-10-28 15:29 ` syzbot
2022-10-28 15:32 ` Hawkins Jiawei
2022-10-28 16:25 ` syzbot
2024-02-03 2:07 ` [syzbot] [btrfs?] " syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000c5461a05ec18b4e6@google.com \
--to=syzbot+dde7e853812ed57835ea@syzkaller.appspotmail.com \
--cc=18801353760@163.com \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=josef@toxicpanda.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=syzkaller-bugs@googlegroups.com \
--cc=trix@redhat.com \
--cc=yin31149@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.