All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+69226cc89d87fd4f8f40@syzkaller.appspotmail.com>
To: dledford@redhat.com, george.kennedy@oracle.com,
	haakon.bugge@oracle.com, jgg@mellanox.com,
	linux-rdma@vger.kernel.org, syzkaller-lts-bugs@googlegroups.com
Subject: Re: general protection fault in rdma_resolve_route
Date: Tue, 27 Apr 2021 23:03:04 -0700	[thread overview]
Message-ID: <000000000000ca459305c102216e@google.com> (raw)
In-Reply-To: <20200403185707.GE8514@mellanox.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

00-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.058488] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff]
[    0.060840] NODE_DATA(0) allocated [mem 0x23fffa000-0x23fffdfff]
[    0.103932] Zone ranges:
[    0.105131]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.107499]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.109481]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.112322] Movable zone start for each node
[    0.113517] Early memory node ranges
[    0.114833]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.116844]   node   0: [mem 0x0000000000100000-0x00000000bfffcfff]
[    0.117754]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.119114] Zeroed struct page in unavailable ranges: 101 pages
[    0.119121] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.488208] kasan: KernelAddressSanitizer initialized
[    0.491077] ACPI: PM-Timer IO Port: 0xb008
[    0.492273] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.493758] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.496178] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.498589] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.499528] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.501455] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.505310] Using ACPI (MADT) for SMP configuration information
[    0.507171] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.508243] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.509621] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.510867] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.511960] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.513141] PM: hibernation: Registered nosave memory: [mem 0xbfffd000-0xbfffffff]
[    0.514253] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfffbbfff]
[    0.515989] PM: hibernation: Registered nosave memory: [mem 0xfffbc000-0xffffffff]
[    0.517624] [mem 0xc0000000-0xfffbbfff] available for PCI devices
[    0.518566] Booting paravirtualized kernel on KVM
[    0.519719] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.521833] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.523803] percpu: Embedded 65 pages/cpu s228040 r8192 d30008 u1048576
[    0.525712] kvm-guest: stealtime: cpu 0, msr 1f6820300
[    0.526590] kvm-guest: PV spinlocks enabled
[    0.527219] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.528285] Built 1 zonelists, mobility grouping on.  Total pages: 2064262
[    0.529218] Policy zone: Normal
[    0.530013] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda1 console=ttyS0 earlyprintk=serial vsyscall=native net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1
[    0.535469] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.538483] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.540453] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.404586] Memory: 6936940K/8388204K available (104477K kernel code, 16962K rwdata, 19800K rodata, 2716K init, 14576K bss, 1451008K reserved, 0K cma-reserved)
[    1.409491] Running RCU self tests
[    1.410244] rcu: Preemptible hierarchical RCU implementation.
[    1.411041] rcu: 	RCU lockdep checking is enabled.
[    1.411868] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    1.413172] rcu: 	RCU callback double-/use-after-free debug enabled.
[    1.414100] 	Trampoline variant of Tasks RCU enabled.
[    1.414856] 	Tracing variant of Tasks RCU enabled.
[    1.415720] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    1.416920] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    1.434818] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[    1.436389] random: get_random_bytes called from start_kernel+0x248/0x452 with crng_init=0
[    1.438577] Console: colour VGA+ 80x25
[    1.440431] printk: console [ttyS0] enabled
[    1.440431] printk: console [ttyS0] enabled
[    1.442758] printk: bootconsole [earlyser0] disabled
[    1.442758] printk: bootconsole [earlyser0] disabled
[    1.445364] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    1.446561] ... MAX_LOCKDEP_SUBCLASSES:  8
[    1.447268] ... MAX_LOCK_DEPTH:          48
[    1.448234] ... MAX_LOCKDEP_KEYS:        8192
[    1.449368] ... CLASSHASH_SIZE:          4096
[    1.450383] ... MAX_LOCKDEP_ENTRIES:     32768
[    1.451040] ... MAX_LOCKDEP_CHAINS:      65536
[    1.451749] ... CHAINHASH_SIZE:          32768
[    1.452760]  memory used by lock dependency info: 6365 kB
[    1.453563]  memory used for stack traces: 4224 kB
[    1.454931]  per task-struct memory footprint: 1920 bytes
[    1.456060] ACPI: Core revision 20210105
[    1.457395] APIC: Switch to symmetric I/O mode setup
[    1.459143] x2apic enabled
[    1.463697] Switched APIC routing to physical x2apic.
[    1.471104] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    1.472880] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212733415c7, max_idle_ns: 440795236380 ns
[    1.474596] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=22999980)
[    1.475862] pid_max: default: 32768 minimum: 301
[    1.477131] LSM: Security Framework initializing
[    1.484641] Yama: becoming mindful.
[    1.485728] AppArmor: AppArmor initialized
[    1.486377] TOMOYO Linux initialized
[    1.487338] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.488572] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.492797] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    1.493825] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    1.494613] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    1.496256] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
[    1.496268] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    1.499114] MDS: Mitigation: Clear CPU buffers
[    1.500421] Freeing SMP alternatives memory: 96K
[    1.625192] smpboot: CPU0: Intel(R) Xeon(R) CPU @ 2.30GHz (family: 0x6, model: 0x3f, stepping: 0x0)
[    1.628822] Running RCU-tasks wait API self tests
[    1.734790] Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
[    1.737061] rcu: Hierarchical SRCU implementation.
[    1.738746] NMI watchdog: Perf NMI watchdog permanently disabled
[    1.740308] smp: Bringing up secondary CPUs ...
[    1.743161] x86: Booting SMP configuration:
[    1.744082] .... node  #0, CPUs:      #1
[    0.048290] kvm-clock: cpu 1, msr 9ff4041, secondary cpu clock
[    1.746880] kvm-guest: stealtime: cpu 1, msr 1f6920300
[    1.746880] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    1.746893] smp: Brought up 1 node, 2 CPUs
[    1.747731] smpboot: Max logical packages: 1
[    1.748615] smpboot: Total of 2 processors activated (9199.99 BogoMIPS)
[    1.756137] devtmpfs: initialized
[    1.766996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.767107] kworker/u4:0 (25) used greatest stack depth: 27696 bytes left
[    1.768357] futex hash table entries: 512 (order: 4, 65536 bytes, linear)
[    1.774706] Callback from call_rcu_tasks_trace() invoked.
[    1.776981] PM: RTC time: 05:54:04, date: 2021-04-28
[    1.779484] NET: Registered protocol family 16
[    1.782350] audit: initializing netlink subsys (disabled)
[    1.789010] thermal_sys: Registered thermal governor 'step_wise'
[    1.789025] thermal_sys: Registered thermal governor 'user_space'
[    1.792224] audit: type=2000 audit(1619589244.902:1): state=initialized audit_enabled=0 res=1
[    1.793888] cpuidle: using governor menu
[    1.795710] ACPI: bus type PCI registered
[    1.797887] dca service started, version 1.12.1
[    1.799280] PCI: Using configuration type 1 for base access
[    1.834628] kworker/u4:1 (80) used greatest stack depth: 27664 bytes left
[    1.954755] kworker/u4:0 (374) used greatest stack depth: 27048 bytes left
[    2.309454] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    2.314763] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    2.325575] cryptd: max_cpu_qlen set to 1000
[    2.345279] Callback from call_rcu_tasks() invoked.
[    2.524609] raid6: avx2x4   gen() 15219 MB/s
[    2.694788] raid6: avx2x4   xor()  7262 MB/s
[    2.864594] raid6: avx2x2   gen() 11255 MB/s
[    3.034606] raid6: avx2x2   xor()  5120 MB/s
[    3.202375] raid6: avx2x1   gen()  6250 MB/s
[    3.372377] raid6: avx2x1   xor()  3156 MB/s
[    3.542374] raid6: sse2x4   gen()  6546 MB/s
[    3.714623] raid6: sse2x4   xor()  3857 MB/s
[    3.884599] raid6: sse2x2   gen()  5919 MB/s
[    4.054587] raid6: sse2x2   xor()  2612 MB/s
[    4.224587] raid6: sse2x1   gen()  3308 MB/s
[    4.394590] raid6: sse2x1   xor()  1499 MB/s
[    4.395909] raid6: using algorithm avx2x4 gen() 15219 MB/s
[    4.397145] raid6: .... xor() 7262 MB/s, rmw enabled
[    4.398231] raid6: using avx2x2 recovery algorithm
[    4.400027] ACPI: Added _OSI(Module Device)
[    4.401320] ACPI: Added _OSI(Processor Device)
[    4.402230] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.403371] ACPI: Added _OSI(Processor Aggregator Device)
[    4.404341] ACPI: Added _OSI(Linux-Dell-Video)
[    4.404601] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    4.405681] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    4.443090] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    4.483327] ACPI: Interpreter enabled
[    4.484827] ACPI: (supports S0 S3 S4 S5)
[    4.485492] ACPI: Using IOAPIC for interrupt routing
[    4.487197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.490999] ACPI: Enabled 16 GPEs in block 00 to 0F
[    4.570375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    4.571871] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    4.573808] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    4.578475] PCI host bridge to bus 0000:00
[    4.579556] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    4.581578] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    4.582582] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    4.584602] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfefff window]
[    4.585897] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.586983] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    4.596270] pci 0000:00:01.0: [8086:7110] type 00 class 0x060100
[    4.635352] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    4.663128] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    4.667290] pci 0000:00:03.0: [1af4:1004] type 00 class 0x000000
[    4.681139] pci 0000:00:03.0: reg 0x10: [io  0xc000-0xc03f]
[    4.689913] pci 0000:00:03.0: reg 0x14: [mem 0xfe800000-0xfe80007f]
[    4.715281] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000
[    4.724631] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    4.732306] pci 0000:00:04.0: reg 0x14: [mem 0xfe801000-0xfe80107f]
[    4.755983] pci 0000:00:05.0: [1ae0:a002] type 00 class 0x030000
[    4.768756] pci 0000:00:05.0: reg 0x10: [mem 0xfe000000-0xfe7fffff]
[    4.804905] pci 0000:00:06.0: [1af4:1002] type 00 class 0x00ff00
[    4.814599] pci 0000:00:06.0: reg 0x10: [io  0xc080-0xc09f]
[    4.845385] pci 0000:00:07.0: [1af4:1005] type 00 class 0x00ff00
[    4.854677] pci 0000:00:07.0: reg 0x10: [io  0xc0a0-0xc0bf]
[    4.862019] pci 0000:00:07.0: reg 0x14: [mem 0xfe802000-0xfe80203f]
[    4.895345] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    4.900887] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    4.905638] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    4.910451] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    4.914692] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    4.926383] iommu: Default domain type: Translated 
[    4.928005] pci 0000:00:05.0: vgaarb: setting as boot VGA device
[    4.928005] pci 0000:00:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    4.928031] pci 0000:00:05.0: vgaarb: bridge control possible
[    4.929711] vgaarb: loaded
[    4.935676] SCSI subsystem initialized
[    4.938811] ACPI: bus type USB registered
[    4.940933] usbcore: registered new interface driver usbfs
[    4.944914] usbcore: registered new interface driver hub
[    4.946468] usbcore: registered new device driver usb
[    4.951257] mc: Linux media interface: v0.10
[    4.952541] videodev: Linux video capture interface: v2.00
[    4.957213] pps_core: LinuxPPS API ver. 1 registered
[    4.958276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.963112] PTP clock support registered
[    4.966465] EDAC MC: Ver: 3.0.0
[    4.968630] Advanced Linux Sound Architecture Driver Initialized.
[    4.976928] Bluetooth: Core ver 2.22
[    4.979044] NET: Registered protocol family 31
[    4.980769] Bluetooth: HCI device and connection manager initialized
[    4.982902] Bluetooth: HCI socket layer initialized
[    4.984625] Bluetooth: L2CAP socket layer initialized
[    4.986482] Bluetooth: SCO socket layer initialized
[    4.988517] NET: Registered protocol family 8
[    4.990235] NET: Registered protocol family 20
[    4.992391] NetLabel: Initializing
[    4.994618] NetLabel:  domain hash size = 128
[    4.996509] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    4.998942] NetLabel:  unlabeled traffic allowed by default
[    5.001549] nfc: nfc_init: NFC Core ver 0.1
[    5.001549] NET: Registered protocol family 39
[    5.001549] PCI: Using ACPI for IRQ routing
[    5.005939] clocksource: Switched to clocksource kvm-clock
[    5.331782] VFS: Disk quotas dquot_6.6.0
[    5.334522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.337855] FS-Cache: Loaded
[    5.340293] CacheFiles: Loaded
[    5.342072] TOMOYO: 2.6.0
[    5.343045] Profile 0 (used by '<kernel>') is not defined.
[    5.345255] Userland tools for TOMOYO 2.6 must be installed and policy must be initialized.
[    5.348577] Please see https://tomoyo.osdn.jp/2.6/ for more information.
[    5.351443] Kernel panic - not syncing: STOP!
[    5.353059] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2-syzkaller #0
[    5.355230] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[    5.355230] Call Trace:
[    5.355230]  dump_stack+0x156/0x1a5
[    5.355230]  panic+0x2ea/0x687
[    5.355230]  ? __warn_printk+0xf3/0xf3
[    5.355230]  ? lock_release+0x47c/0x970
[    5.355230]  ? lock_downgrade+0x8a0/0x8a0
[    5.355230]  ? vprintk_func+0x76/0x180
[    5.355230]  tomoyo_check_profile.cold+0xc9/0xe9
[    5.355230]  tomoyo_load_builtin_policy+0x27b/0x2c2
[    5.355230]  ? smack_nf_ip_init+0x77/0x77
[    5.355230]  ? tomoyo_write_domain2+0x1b0/0x1b0
[    5.355230]  ? securityfs_create_dentry+0x13a/0x530
[    5.355230]  tomoyo_initerface_init+0x1b7/0x1c2
[    5.355230]  ? tomoyo_mm_init+0x257/0x257
[    5.355230]  do_one_initcall+0xef/0x640
[    5.355230]  ? perf_trace_initcall_level+0x3d0/0x3d0
[    5.355230]  ? __this_cpu_preempt_check+0x1d/0x30
[    5.355230]  ? lock_is_held_type+0x100/0x140
[    5.355230]  kernel_init_freeable+0x58a/0x5f9
[    5.355230]  ? rest_init+0x2e4/0x2e4
[    5.355230]  kernel_init+0x12/0x16c
[    5.355230]  ret_from_fork+0x1f/0x30
[    5.355230] Rebooting in 86400 seconds..


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=17af81e1d00000


Tested on:

commit:         6cc9e215 RDMA/nldev: Add copy-on-fork attribute to get sys..
git tree:       git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git for-next
kernel config:  https://syzkaller.appspot.com/x/.config?x=d845af22fa44b27a
dashboard link: https://syzkaller.appspot.com/bug?extid=69226cc89d87fd4f8f40
compiler:       


  parent reply	other threads:[~2021-04-28  6:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-03 18:43 [PATCH for-rc] RDMA/cma: fix race between addr_handler and resolve_route Håkon Bugge
2020-04-03 18:57 ` Jason Gunthorpe
2020-04-03 19:07   ` Håkon Bugge
2020-04-03 19:36     ` Jason Gunthorpe
2020-04-06 17:00       ` Håkon Bugge
2020-04-06 17:31         ` Jason Gunthorpe
2020-04-06 18:02           ` Håkon Bugge
2020-04-06 18:10             ` Jason Gunthorpe
2020-04-14 10:34               ` Håkon Bugge
2020-04-14 12:50                 ` Jason Gunthorpe
2020-04-14 13:57                   ` Håkon Bugge
2020-04-14 16:11                     ` Jason Gunthorpe
2020-04-16 13:33                       ` Håkon Bugge
2020-04-16 18:55                         ` Jason Gunthorpe
2021-04-28  6:03   ` syzbot [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-04-19 16:04 general protection fault in rdma_resolve_route syzbot
2018-04-19 16:12 ` Parav Pandit
2018-04-19 16:23   ` Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=000000000000ca459305c102216e@google.com \
    --to=syzbot+69226cc89d87fd4f8f40@syzkaller.appspotmail.com \
    --cc=dledford@redhat.com \
    --cc=george.kennedy@oracle.com \
    --cc=haakon.bugge@oracle.com \
    --cc=jgg@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=syzkaller-lts-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.