From: syzbot <syzbot+0c6da80218456f1edc36@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] INFO: task hung in synchronize_rcu (3)
Date: Tue, 10 May 2022 05:12:08 -0700 [thread overview]
Message-ID: <000000000000d2a81305dea73b7f@google.com> (raw)
In-Reply-To: <20220510115257.5804-1-hdanton@sina.com>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
ackground, child pid 4958
[ 23.507564][ T4959] 8021q: adding VLAN 0 to HW filter on device bond0
[ 23.519205][ T4959] eql: remember to turn off Van-Jacobson compression on your slave devices
Starting sshd: OK
syzkaller
Warning: Permanently added '10.128.0.85' (ECDSA) to the list of known hosts.
2022/05/10 12:11:01 ignoring optional flag "raw_cover"="false"
2022/05/10 12:11:01 fuzzer started
2022/05/10 12:11:01 connecting to host at 10.128.0.169:33779
2022/05/10 12:11:01 checking machine...
2022/05/10 12:11:01 checking revisions...
2022/05/10 12:11:01 testing simple program...
syzkaller login: [ 40.935530][ T5379] cgroup: Unknown subsys name 'net'
[ 41.071569][ T5379] cgroup: Unknown subsys name 'rlimit'
[ 42.335602][ T5385] IPVS: ftp: loaded support on port[0] = 21
[ 42.394890][ T5385] chnl_net:caif_netlink_parms(): no params data found
[ 42.433361][ T5385] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.440978][ T5385] bridge0: port 1(bridge_slave_0) entered disabled state
[ 42.449123][ T5385] device bridge_slave_0 entered promiscuous mode
[ 42.458302][ T5385] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.466010][ T5385] bridge0: port 2(bridge_slave_1) entered disabled state
[ 42.473764][ T5385] device bridge_slave_1 entered promiscuous mode
[ 42.490493][ T5385] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 42.502207][ T5385] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 42.521537][ T5385] team0: Port device team_slave_0 added
[ 42.529481][ T5385] team0: Port device team_slave_1 added
[ 42.545295][ T5385] batman_adv: batadv0: Adding interface: batadv_slave_0
[ 42.552353][ T5385] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 42.578953][ T5385] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[ 42.591532][ T5385] batman_adv: batadv0: Adding interface: batadv_slave_1
[ 42.598589][ T5385] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 42.624881][ T5385] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[ 42.647993][ T5385] device hsr_slave_0 entered promiscuous mode
[ 42.654646][ T5385] device hsr_slave_1 entered promiscuous mode
[ 42.722230][ T5385] netdevsim netdevsim0 netdevsim0: renamed from eth0
[ 42.732556][ T5385] netdevsim netdevsim0 netdevsim1: renamed from eth1
[ 42.742043][ T5385] netdevsim netdevsim0 netdevsim2: renamed from eth2
[ 42.750927][ T5385] netdevsim netdevsim0 netdevsim3: renamed from eth3
[ 42.771509][ T5385] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.779012][ T5385] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 42.786862][ T5385] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.794013][ T5385] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 42.833264][ T5385] 8021q: adding VLAN 0 to HW filter on device bond0
[ 42.845912][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 42.854933][ T17] bridge0: port 1(bridge_slave_0) entered disabled state
[ 42.864247][ T17] bridge0: port 2(bridge_slave_1) entered disabled state
[ 42.872531][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 42.886684][ T5385] 8021q: adding VLAN 0 to HW filter on device team0
[ 42.897461][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[ 42.907316][ T17] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.914462][ T17] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 42.937517][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[ 42.947781][ T3022] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.954822][ T3022] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 42.963063][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[ 42.972691][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[ 42.981899][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[ 42.992884][ T2950] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[ 43.004741][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[ 43.016276][ T5385] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[ 43.032499][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[ 43.040966][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[ 43.054589][ T5385] 8021q: adding VLAN 0 to HW filter on device batadv0
[ 43.072616][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[ 43.090598][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[ 43.098877][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[ 43.107021][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[ 43.116925][ T5385] device veth0_vlan entered promiscuous mode
[ 43.128438][ T5385] device veth1_vlan entered promiscuous mode
[ 43.147614][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[ 43.156727][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[ 43.166137][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[ 43.176463][ T5385] device veth0_macvtap entered promiscuous mode
[ 43.186693][ T5385] device veth1_macvtap entered promiscuous mode
[ 43.202698][ T5385] batman_adv: batadv0: Interface activated: batadv_slave_0
[ 43.210227][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[ 43.220664][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[ 43.232280][ T5385] batman_adv: batadv0: Interface activated: batadv_slave_1
[ 43.240456][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[ 43.290329][ T1019] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[ 43.304944][ T1019] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[ 43.314460][ T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[ 43.317814][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.322678][ T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[ 43.340187][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 43.375727][ T5385] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
2022/05/10 12:11:04 building call list...
executing program
[ 43.949689][ T5385] ==================================================================
[ 43.958088][ T5385] BUG: KASAN: use-after-free in task_active_pid_ns+0xb1/0xd0
[ 43.965539][ T5385] Read of size 4 at addr ffff88823b705004 by task syz-executor.0/5385
[ 43.973758][ T5385]
[ 43.976084][ T5385] CPU: 1 PID: 5385 Comm: syz-executor.0 Not tainted 5.8.0-rc6-syzkaller-00003-g4fa640dc5230-dirty #0
[ 43.987108][ T5385] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ 43.997146][ T5385] Call Trace:
[ 44.000503][ T5385] dump_stack+0xf6/0x16e
[ 44.004912][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.009937][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.014952][ T5385] print_address_description.constprop.0.cold+0xae/0x467
[ 44.022061][ T5385] ? __wake_up_common_lock+0xde/0x130
[ 44.027426][ T5385] ? vprintk_func+0x95/0x241
[ 44.032153][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.037652][ T5385] kasan_report.cold+0x1f/0x37
[ 44.042526][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.049012][ T5385] task_active_pid_ns+0xb1/0xd0
[ 44.053869][ T5385] do_notify_parent+0x33a/0xf80
[ 44.058742][ T5385] ? do_exit+0x24f2/0x2ce0
[ 44.063163][ T5385] ? send_sigqueue+0x810/0x810
[ 44.068821][ T5385] ? lock_release+0x810/0x810
[ 44.073605][ T5385] ? zap_pid_ns_processes+0x547/0x6b0
[ 44.079083][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.085067][ T5385] do_exit+0x222c/0x2ce0
[ 44.089312][ T5385] ? find_held_lock+0x2d/0x110
[ 44.094251][ T5385] ? mm_update_next_owner+0x7b0/0x7b0
[ 44.099762][ T5385] ? get_signal+0x330/0x20c0
[ 44.104390][ T5385] ? lock_downgrade+0x730/0x730
[ 44.109354][ T5385] do_group_exit+0x125/0x310
[ 44.113999][ T5385] get_signal+0x408/0x20c0
[ 44.118435][ T5385] ? __sanitizer_cov_trace_switch+0x45/0x70
[ 44.124335][ T5385] do_signal+0x82/0x2490
[ 44.128581][ T5385] ? preempt_schedule_irq+0x54/0xe0
[ 44.133868][ T5385] ? loop_configure+0x1350/0x1350
[ 44.138899][ T5385] ? copy_siginfo_to_user32+0xa0/0xa0
[ 44.144267][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.150252][ T5385] ? blkdev_common_ioctl+0x1760/0x1760
[ 44.155730][ T5385] ? __prepare_exit_to_usermode+0x105/0x1e0
[ 44.161630][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.167607][ T5385] __prepare_exit_to_usermode+0x12f/0x1e0
[ 44.173842][ T5385] do_syscall_64+0x52/0xe0
[ 44.178260][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.184141][ T5385] RIP: 0033:0x7fc9dc7e3e07
[ 44.188537][ T5385] Code: Bad RIP value.
[ 44.192952][ T5385] RSP: 002b:00007fc9dce2ad78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 44.201527][ T5385] RAX: fffffffffffffffa RBX: 00007fc9dce2ae00 RCX: 00007fc9dc7e3e07
[ 44.209505][ T5385] RDX: 0000000000000000 RSI: 0000000000004c01 RDI: 0000000000000003
[ 44.217473][ T5385] RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fc9dce2ac10
[ 44.225715][ T5385] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000032
[ 44.233866][ T5385] R13: 000000000000a98e R14: 0000000000000003 R15: 00007fc9dce2ae40
[ 44.241969][ T5385]
[ 44.244321][ T5385] Allocated by task 0:
[ 44.248405][ T5385] save_stack+0x1b/0x40
[ 44.253199][ T5385] __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 44.258892][ T5385] kmem_cache_alloc+0xd7/0x310
[ 44.263743][ T5385] alloc_pid+0xd5/0xda0
[ 44.267914][ T5385] copy_process+0x3194/0x6f00
[ 44.272589][ T5385] _do_fork+0x12c/0xa90
[ 44.276747][ T5385] kernel_thread+0xb5/0xf0
[ 44.281155][ T5385] rest_init+0x23/0x460
[ 44.285492][ T5385] start_kernel+0x9a7/0x9e2
[ 44.290003][ T5385] secondary_startup_64+0xa4/0xb0
[ 44.295023][ T5385]
[ 44.297432][ T5385] Freed by task 5379:
[ 44.301413][ T5385] save_stack+0x1b/0x40
[ 44.305562][ T5385] __kasan_slab_free+0x11f/0x160
[ 44.310492][ T5385] slab_free_freelist_hook+0x53/0x140
[ 44.315869][ T5385] kmem_cache_free+0x8a/0x380
[ 44.320637][ T5385] put_pid.part.0+0xfa/0x150
[ 44.325216][ T5385] put_pid+0x1b/0x30
[ 44.329280][ T5385] proc_do_cad_pid+0x153/0x180
[ 44.334036][ T5385] proc_sys_call_handler+0x28f/0x5b0
[ 44.339320][ T5385] vfs_write+0x2b0/0x6b0
[ 44.343560][ T5385] ksys_write+0x12d/0x250
[ 44.347892][ T5385] do_syscall_64+0x46/0xe0
[ 44.352313][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.358195][ T5385]
[ 44.360517][ T5385] The buggy address belongs to the object at ffff88823b705000
[ 44.360517][ T5385] which belongs to the cache pid of size 224
[ 44.373875][ T5385] The buggy address is located 4 bytes inside of
[ 44.373875][ T5385] 224-byte region [ffff88823b705000, ffff88823b7050e0)
[ 44.386972][ T5385] The buggy address belongs to the page:
[ 44.392605][ T5385] page:ffffea0008edc140 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
[ 44.401714][ T5385] flags: 0x57ff00000000200(slab)
[ 44.406664][ T5385] raw: 057ff00000000200 dead000000000100 dead000000000122 ffff8880b5889400
[ 44.415255][ T5385] raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
[ 44.423841][ T5385] page dumped because: kasan: bad access detected
[ 44.430383][ T5385] page_owner tracks the page as allocated
[ 44.436115][ T5385] page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0()
[ 44.444534][ T5385] register_early_stack+0x66/0xb0
[ 44.449557][ T5385] init_page_owner+0x6b/0x7e0
[ 44.454230][ T5385] page_ext_init+0x3a8/0x3b8
[ 44.458814][ T5385] kernel_init_freeable+0x31a/0x691
[ 44.463993][ T5385] page_owner free stack trace missing
[ 44.469360][ T5385]
[ 44.471943][ T5385] Memory state around the buggy address:
[ 44.477750][ T5385] ffff88823b704f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.485827][ T5385] ffff88823b704f80: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
[ 44.494006][ T5385] >ffff88823b705000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 44.502327][ T5385] ^
[ 44.506747][ T5385] ffff88823b705080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 44.514917][ T5385] ffff88823b705100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
[ 44.523036][ T5385] ==================================================================
[ 44.531112][ T5385] Disabling lock debugging due to kernel taint
[ 44.537345][ T5385] Kernel panic - not syncing: panic_on_warn set ...
[ 44.543927][ T5385] CPU: 1 PID: 5385 Comm: syz-executor.0 Tainted: G B 5.8.0-rc6-syzkaller-00003-g4fa640dc5230-dirty #0
[ 44.556232][ T5385] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ 44.566311][ T5385] Call Trace:
[ 44.569690][ T5385] dump_stack+0xf6/0x16e
[ 44.573924][ T5385] panic+0x370/0x7b0
[ 44.577811][ T5385] ? __warn_printk+0xf3/0xf3
[ 44.582893][ T5385] ? _raw_spin_unlock_irqrestore+0x2a/0x60
[ 44.588693][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.593702][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.598801][ T5385] end_report+0x4d/0x53
[ 44.603132][ T5385] kasan_report.cold+0xd/0x37
[ 44.607988][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.613020][ T5385] task_active_pid_ns+0xb1/0xd0
[ 44.617896][ T5385] do_notify_parent+0x33a/0xf80
[ 44.622770][ T5385] ? do_exit+0x24f2/0x2ce0
[ 44.627188][ T5385] ? send_sigqueue+0x810/0x810
[ 44.632657][ T5385] ? lock_release+0x810/0x810
[ 44.637341][ T5385] ? zap_pid_ns_processes+0x547/0x6b0
[ 44.642962][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.649038][ T5385] do_exit+0x222c/0x2ce0
[ 44.653378][ T5385] ? find_held_lock+0x2d/0x110
[ 44.658402][ T5385] ? mm_update_next_owner+0x7b0/0x7b0
[ 44.663759][ T5385] ? get_signal+0x330/0x20c0
[ 44.668437][ T5385] ? lock_downgrade+0x730/0x730
[ 44.673317][ T5385] do_group_exit+0x125/0x310
[ 44.677990][ T5385] get_signal+0x408/0x20c0
[ 44.682633][ T5385] ? __sanitizer_cov_trace_switch+0x45/0x70
[ 44.688780][ T5385] do_signal+0x82/0x2490
[ 44.693465][ T5385] ? preempt_schedule_irq+0x54/0xe0
[ 44.698679][ T5385] ? loop_configure+0x1350/0x1350
[ 44.703960][ T5385] ? copy_siginfo_to_user32+0xa0/0xa0
[ 44.712100][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.718153][ T5385] ? blkdev_common_ioctl+0x1760/0x1760
[ 44.723592][ T5385] ? __prepare_exit_to_usermode+0x105/0x1e0
[ 44.729636][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.735596][ T5385] __prepare_exit_to_usermode+0x12f/0x1e0
[ 44.741652][ T5385] do_syscall_64+0x52/0xe0
[ 44.746053][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.751954][ T5385] RIP: 0033:0x7fc9dc7e3e07
[ 44.756428][ T5385] Code: Bad RIP value.
[ 44.760473][ T5385] RSP: 002b:00007fc9dce2ad78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 44.769542][ T5385] RAX: fffffffffffffffa RBX: 00007fc9dce2ae00 RCX: 00007fc9dc7e3e07
[ 44.779439][ T5385] RDX: 0000000000000000 RSI: 0000000000004c01 RDI: 0000000000000003
[ 44.787651][ T5385] RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fc9dce2ac10
[ 44.795603][ T5385] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000032
[ 44.803567][ T5385] R13: 000000000000a98e R14: 0000000000000003 R15: 00007fc9dce2ae40
[ 44.812073][ T5385] Kernel Offset: disabled
[ 44.816388][ T5385] Rebooting in 86400 seconds..
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=159d83faf00000
Tested on:
commit: 4fa640dc Merge tag 'vfio-v5.8-rc7' of git://github.com..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
kernel config: https://syzkaller.appspot.com/x/.config?x=c8387e9c623864db
dashboard link: https://syzkaller.appspot.com/bug?extid=0c6da80218456f1edc36
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch: https://syzkaller.appspot.com/x/patch.diff?x=12a4f831f00000
next parent reply other threads:[~2022-05-10 12:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220510115257.5804-1-hdanton@sina.com>
2022-05-10 12:12 ` syzbot [this message]
[not found] <20220511132050.5868-1-hdanton@sina.com>
2022-05-11 13:44 ` [syzbot] INFO: task hung in synchronize_rcu (3) syzbot
[not found] <20220510110816.5751-1-hdanton@sina.com>
2022-05-10 11:43 ` syzbot
2020-07-22 18:22 syzbot
2022-05-10 8:51 ` [syzbot] " syzbot
2022-05-10 13:45 ` Sean Christopherson
2022-05-10 13:50 ` Paolo Bonzini
2022-05-10 13:56 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000d2a81305dea73b7f@google.com \
--to=syzbot+0c6da80218456f1edc36@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.