All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, sinquersw@gmail.com,
	syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [net?] WARNING in ip6_route_info_create
Date: Thu, 07 Dec 2023 16:08:05 -0800	[thread overview]
Message-ID: <000000000000e3666a060bf460ae@google.com> (raw)
In-Reply-To: <93835aea-7f9a-4026-ad45-c9d5ab62a3d3@gmail.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

76.559062][ T5064] chnl_net:caif_netlink_parms(): no params data found
[   76.643777][ T5064] bridge0: port 1(bridge_slave_0) entered blocking state
[   76.651414][ T5064] bridge0: port 1(bridge_slave_0) entered disabled state
[   76.658900][ T5064] bridge_slave_0: entered allmulticast mode
[   76.666479][ T5064] bridge_slave_0: entered promiscuous mode
[   76.677504][ T5064] bridge0: port 2(bridge_slave_1) entered blocking state
[   76.684726][ T5064] bridge0: port 2(bridge_slave_1) entered disabled state
[   76.692313][ T5064] bridge_slave_1: entered allmulticast mode
[   76.700260][ T5064] bridge_slave_1: entered promiscuous mode
[   76.736969][ T5064] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   76.750084][ T5064] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   76.789051][ T5064] team0: Port device team_slave_0 added
[   76.799438][ T5064] team0: Port device team_slave_1 added
[   76.831411][ T5064] batman_adv: batadv0: Adding interface: batadv_slave_0
[   76.838650][ T5064] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   76.865205][ T5064] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   76.879442][ T5064] batman_adv: batadv0: Adding interface: batadv_slave_1
[   76.886943][ T5064] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   76.913369][ T5064] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   76.966579][ T5064] hsr_slave_0: entered promiscuous mode
[   76.973593][ T5064] hsr_slave_1: entered promiscuous mode
executing program
[   77.146981][ T5064] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   77.161861][ T5064] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   77.173875][ T5064] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   77.185116][ T5064] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   77.222259][ T5064] bridge0: port 2(bridge_slave_1) entered blocking state
[   77.229852][ T5064] bridge0: port 2(bridge_slave_1) entered forwarding state
[   77.238410][ T5064] bridge0: port 1(bridge_slave_0) entered blocking state
[   77.245959][ T5064] bridge0: port 1(bridge_slave_0) entered forwarding state
[   77.330440][ T5064] 8021q: adding VLAN 0 to HW filter on device bond0
[   77.351648][    T8] bridge0: port 1(bridge_slave_0) entered disabled state
[   77.373341][    T8] bridge0: port 2(bridge_slave_1) entered disabled state
[  182.405611][    C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  182.413039][    C1] rcu: 	0-...!: (1 GPs behind) idle=678c/1/0x4000000000000000 softirq=6235/6245 fqs=5
[  182.423532][    C1] rcu: 	(detected by 1, t=10502 jiffies, g=7501, q=25 ncpus=2)
[  182.431133][    C1] Sending NMI from CPU 1 to CPUs 0:
[  182.437070][    C0] NMI backtrace for cpu 0
[  182.437082][    C0] CPU: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.7.0-rc3-syzkaller-00813-ga5e1700298fd #0
[  182.437104][    C0] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
[  182.437118][    C0] Workqueue: events linkwatch_event
[  182.437175][    C0] RIP: 0010:__linkwatch_run_queue+0x1fa/0x460
[  182.437205][    C0] Code: 85 05 02 00 00 4c 89 e9 4c 89 6a 08 48 c1 e9 03 80 3c 29 00 0f 85 d9 01 00 00 49 89 55 00 e8 fd f0 10 f9 48 89 d8 48 c1 e8 03 <80> 3c 28 00 0f 85 b2 01 00 00 4c 89 f8 48 89 1b 48 c1 e8 03 80 3c
[  182.437224][    C0] RSP: 0018:ffffc900000d7c50 EFLAGS: 00000802
[  182.437240][    C0] RAX: 1ffff1100d23bcd5 RBX: ffff8880691de6a8 RCX: 1ffffffff1d55714
[  182.437254][    C0] RDX: ffff88801665d940 RSI: ffffffff8876a153 RDI: ffff8880691dc6b0
[  182.437267][    C0] RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000
[  182.437280][    C0] R10: 0000000000000001 R11: 0000000000000003 R12: 00000000000000bd
[  182.437292][    C0] R13: ffffffff8eaab8a0 R14: ffff8880691de000 R15: ffff8880691de6b0
[  182.437306][    C0] FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
[  182.437326][    C0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  182.437340][    C0] CR2: 00007ffe776596e8 CR3: 0000000024fce000 CR4: 00000000003506f0
[  182.437353][    C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  182.437365][    C0] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  182.437377][    C0] Call Trace:
[  182.437387][    C0]  <NMI>
[  182.437396][    C0]  ? show_regs+0x8f/0xa0
[  182.437424][    C0]  ? nmi_cpu_backtrace+0x1d4/0x390
[  182.437451][    C0]  ? nmi_cpu_backtrace_handler+0xc/0x10
[  182.437481][    C0]  ? nmi_handle+0x1a6/0x570
[  182.437506][    C0]  ? __linkwatch_run_queue+0x1fa/0x460
[  182.437534][    C0]  ? default_do_nmi+0x6a/0x160
[  182.437563][    C0]  ? exc_nmi+0x186/0x200
[  182.437589][    C0]  ? end_repeat_nmi+0xf/0x2a
[  182.437615][    C0]  ? __linkwatch_run_queue+0x1f3/0x460
[  182.437641][    C0]  ? __linkwatch_run_queue+0x1fa/0x460
[  182.437669][    C0]  ? __linkwatch_run_queue+0x1fa/0x460
[  182.437703][    C0]  ? __linkwatch_run_queue+0x1fa/0x460
[  182.437730][    C0]  </NMI>
[  182.437736][    C0]  <TASK>
[  182.437744][    C0]  linkwatch_event+0x8f/0xc0
[  182.437771][    C0]  ? __linkwatch_run_queue+0x460/0x460
[  182.437799][    C0]  ? rcu_is_watching+0x12/0xb0
[  182.437823][    C0]  process_one_work+0x886/0x15d0
[  182.437857][    C0]  ? lock_sync+0x190/0x190
[  182.437887][    C0]  ? workqueue_congested+0x300/0x300
[  182.437919][    C0]  ? assign_work+0x1a0/0x250
[  182.437946][    C0]  worker_thread+0x8b9/0x1290
[  182.437979][    C0]  ? process_one_work+0x15d0/0x15d0
[  182.438006][    C0]  kthread+0x2c6/0x3a0
[  182.438033][    C0]  ? _raw_spin_unlock_irq+0x23/0x50
[  182.438056][    C0]  ? kthread_complete_and_exit+0x40/0x40
[  182.438082][    C0]  ret_from_fork+0x45/0x80
[  182.438107][    C0]  ? kthread_complete_and_exit+0x40/0x40
[  182.438132][    C0]  ret_from_fork_asm+0x11/0x20
[  182.438169][    C0]  </TASK>
[  182.439064][    C1] rcu: rcu_preempt kthread starved for 10492 jiffies! g7501 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
[  182.747203][    C1] rcu: 	Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
[  182.757290][    C1] rcu: RCU grace-period kthread stack dump:
[  182.763189][    C1] task:rcu_preempt     state:R  running task     stack:27480 pid:17    tgid:17    ppid:2      flags:0x00004000
[  182.775649][    C1] Call Trace:
[  182.778946][    C1]  <TASK>
[  182.781909][    C1]  __schedule+0xedb/0x5af0
[  182.786453][    C1]  ? lockdep_hardirqs_on_prepare+0x420/0x420
[  182.792499][    C1]  ? io_schedule_timeout+0x150/0x150
[  182.797914][    C1]  ? schedule+0x1fc/0x270
[  182.802408][    C1]  ? reacquire_held_locks+0x4c0/0x4c0
[  182.809840][    C1]  ? timer_fixup_activate+0x220/0x220
[  182.815483][    C1]  ? lockdep_init_map_type+0x16d/0x7d0
[  182.820980][    C1]  schedule+0xe9/0x270
[  182.825112][    C1]  schedule_timeout+0x137/0x290
[  182.830080][    C1]  ? usleep_range_state+0x1a0/0x1a0
[  182.835327][    C1]  ? do_init_timer+0x100/0x100
[  182.840422][    C1]  ? _raw_spin_unlock_irqrestore+0x3b/0x70
[  182.846449][    C1]  ? prepare_to_swait_event+0xf4/0x470
[  182.852142][    C1]  rcu_gp_fqs_loop+0x1ec/0xb10
[  182.856953][    C1]  ? rcu_check_gp_kthread_starvation+0x450/0x450
[  182.863319][    C1]  ? reacquire_held_locks+0x4c0/0x4c0
[  182.868829][    C1]  rcu_gp_kthread+0x24b/0x380
[  182.873666][    C1]  ? rcu_gp_init+0x1510/0x1510
[  182.878553][    C1]  ? lockdep_hardirqs_on+0x7d/0x110
[  182.883882][    C1]  ? __kthread_parkme+0x14b/0x220
[  182.889025][    C1]  ? rcu_gp_init+0x1510/0x1510
[  182.894077][    C1]  kthread+0x2c6/0x3a0
[  182.898261][    C1]  ? _raw_spin_unlock_irq+0x23/0x50
[  182.903604][    C1]  ? kthread_complete_and_exit+0x40/0x40
[  182.909438][    C1]  ret_from_fork+0x45/0x80
[  182.913881][    C1]  ? kthread_complete_and_exit+0x40/0x40
[  182.919791][    C1]  ret_from_fork_asm+0x11/0x20
[  182.924798][    C1]  </TASK>
[  182.928629][    C1] rcu: Stack dump where RCU GP kthread last ran:
[  182.935053][    C1] CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.7.0-rc3-syzkaller-00813-ga5e1700298fd #0
[  182.945064][    C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
[  182.955572][    C1] Workqueue: events_unbound toggle_allocation_gate
[  182.962365][    C1] RIP: 0010:smp_call_function_many_cond+0x4e4/0x1550
[  182.969594][    C1] Code: 0b 00 85 ed 74 4d 48 b8 00 00 00 00 00 fc ff df 4d 89 f4 4c 89 f5 49 c1 ec 03 83 e5 07 49 01 c4 83 c5 03 e8 8e c0 0b 00 f3 90 <41> 0f b6 04 24 40 38 c5 7c 08 84 c0 0f 85 24 0e 00 00 8b 43 08 31
[  182.989601][    C1] RSP: 0018:ffffc90000107930 EFLAGS: 00000293
[  182.995897][    C1] RAX: 0000000000000000 RBX: ffff8880b98441a0 RCX: ffffffff817bd1e8
[  183.004197][    C1] RDX: ffff888016663b80 RSI: ffffffff817bd1c2 RDI: 0000000000000005
[  183.012511][    C1] RBP: 0000000000000003 R08: 0000000000000005 R09: 0000000000000000
[  183.020942][    C1] R10: 0000000000000001 R11: 0000000000000006 R12: ffffed1017308835
[  183.029238][    C1] R13: 0000000000000001 R14: ffff8880b98441a8 R15: ffff8880b993d8c0
[  183.037444][    C1] FS:  0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
[  183.046874][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  183.053529][    C1] CR2: 00007f2fa42c35c0 CR3: 000000000cd77000 CR4: 00000000003506f0
[  183.061657][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  183.069862][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  183.078121][    C1] Call Trace:
[  183.081530][    C1]  <IRQ>
[  183.084842][    C1]  ? show_regs+0x8f/0xa0
[  183.089387][    C1]  ? rcu_check_gp_kthread_starvation+0x317/0x450
[  183.095999][    C1]  ? do_raw_spin_unlock+0x173/0x230
[  183.101217][    C1]  ? rcu_sched_clock_irq+0x2269/0x3150
[  183.106770][    C1]  ? rcu_note_context_switch+0x1ae0/0x1ae0
[  183.112634][    C1]  ? tick_sched_do_timer+0x2e0/0x2e0
[  183.118116][    C1]  ? update_process_times+0x17b/0x220
[  183.124301][    C1]  ? timer_clear_idle+0xa0/0xa0
[  183.129378][    C1]  ? update_wall_time+0x1c/0x40
[  183.134511][    C1]  ? tick_do_update_jiffies64+0x22e/0x380
[  183.140622][    C1]  ? tick_sched_handle+0x8e/0x170
[  183.145932][    C1]  ? tick_nohz_highres_handler+0xe9/0x110
[  183.151688][    C1]  ? __hrtimer_run_queues+0x647/0xc20
[  183.157214][    C1]  ? enqueue_hrtimer+0x310/0x310
[  183.162352][    C1]  ? ktime_get_update_offsets_now+0x3bc/0x610
[  183.168976][    C1]  ? hrtimer_interrupt+0x31b/0x800
[  183.174658][    C1]  ? __sysvec_apic_timer_interrupt+0x105/0x400
[  183.181375][    C1]  ? sysvec_apic_timer_interrupt+0x90/0xb0
[  183.187325][    C1]  </IRQ>
[  183.190321][    C1]  <TASK>
[  183.193473][    C1]  ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
[  183.199798][    C1]  ? smp_call_function_many_cond+0x508/0x1550
[  183.206008][    C1]  ? smp_call_function_many_cond+0x4e2/0x1550
[  183.212274][    C1]  ? smp_call_function_many_cond+0x4e4/0x1550
[  183.218378][    C1]  ? __text_poke+0xca0/0xca0
[  183.222988][    C1]  ? __kmem_cache_alloc_node+0xc3/0x310
[  183.228759][    C1]  ? generic_smp_call_function_single_interrupt+0x20/0x20
[  183.236244][    C1]  ? apply_relocation+0x830/0x830
[  183.241937][    C1]  ? __text_poke+0xca0/0xca0
[  183.247038][    C1]  on_each_cpu_cond_mask+0x40/0x90
[  183.254673][    C1]  text_poke_bp_batch+0x22b/0x750
[  183.260048][    C1]  ? arch_jump_label_transform_apply+0x17/0x30
[  183.266472][    C1]  ? alternatives_enable_smp+0x400/0x400
[  183.272321][    C1]  ? __jump_label_patch+0x1db/0x400
[  183.278635][    C1]  ? text_poke_queue+0xef/0x180
[  183.284337][    C1]  ? arch_jump_label_transform_queue+0xc0/0x110
[  183.290718][    C1]  text_poke_finish+0x30/0x40
[  183.295802][    C1]  arch_jump_label_transform_apply+0x1c/0x30
[  183.301928][    C1]  jump_label_update+0x1d7/0x400
[  183.306906][    C1]  static_key_enable_cpuslocked+0x1b7/0x270
[  183.313298][    C1]  static_key_enable+0x1a/0x20
[  183.318321][    C1]  toggle_allocation_gate+0xf4/0x250
[  183.323742][    C1]  ? wake_up_kfence_timer+0x30/0x30
[  183.329079][    C1]  process_one_work+0x886/0x15d0
[  183.334242][    C1]  ? lock_sync+0x190/0x190
[  183.338799][    C1]  ? workqueue_congested+0x300/0x300
[  183.344376][    C1]  ? assign_work+0x1a0/0x250
[  183.349092][    C1]  worker_thread+0x8b9/0x1290
[  183.353898][    C1]  ? process_one_work+0x15d0/0x15d0
[  183.359381][    C1]  kthread+0x2c6/0x3a0
[  183.363474][    C1]  ? _raw_spin_unlock_irq+0x23/0x50
[  183.368873][    C1]  ? kthread_complete_and_exit+0x40/0x40
[  183.374536][    C1]  ret_from_fork+0x45/0x80
[  183.379242][    C1]  ? kthread_complete_and_exit+0x40/0x40
[  183.385436][    C1]  ret_from_fork_asm+0x11/0x20
[  183.390247][    C1]  </TASK>


syzkaller build log:
go env (err=<nil>)
GO111MODULE="auto"
GOARCH="amd64"
GOBIN=""
GOCACHE="/syzkaller/.cache/go-build"
GOENV="/syzkaller/.config/go/env"
GOEXE=""
GOEXPERIMENT=""
GOFLAGS=""
GOHOSTARCH="amd64"
GOHOSTOS="linux"
GOINSECURE=""
GOMODCACHE="/syzkaller/jobs-2/linux/gopath/pkg/mod"
GONOPROXY=""
GONOSUMDB=""
GOOS="linux"
GOPATH="/syzkaller/jobs-2/linux/gopath"
GOPRIVATE=""
GOPROXY="https://proxy.golang.org,direct"
GOROOT="/usr/local/go"
GOSUMDB="sum.golang.org"
GOTMPDIR=""
GOTOOLDIR="/usr/local/go/pkg/tool/linux_amd64"
GOVCS=""
GOVERSION="go1.20.1"
GCCGO="gccgo"
GOAMD64="v1"
AR="ar"
CC="gcc"
CXX="g++"
CGO_ENABLED="1"
GOMOD="/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod"
GOWORK=""
CGO_CFLAGS="-O2 -g"
CGO_CPPFLAGS=""
CGO_CXXFLAGS="-O2 -g"
CGO_FFLAGS="-O2 -g"
CGO_LDFLAGS="-O2 -g"
PKG_CONFIG="pkg-config"
GOGCCFLAGS="-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -fdebug-prefix-map=/tmp/go-build2932039887=/tmp/go-build -gno-record-gcc-switches"

git status (err=<nil>)
HEAD detached at 28b24332d
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:32: run command via tools/syz-env for best compatibility, see:
Makefile:33: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' ./sys/syz-sysgen | grep -q false || go install ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=28b24332d95f2f7df44ec7e7a5e0025bcadc6277 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20231207-101622'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-fuzzer github.com/google/syzkaller/syz-fuzzer
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=28b24332d95f2f7df44ec7e7a5e0025bcadc6277 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20231207-101622'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=28b24332d95f2f7df44ec7e7a5e0025bcadc6277 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20231207-101622'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-stress github.com/google/syzkaller/tools/syz-stress
mkdir -p ./bin/linux_amd64
gcc -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -fpermissive -w -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"28b24332d95f2f7df44ec7e7a5e0025bcadc6277\"


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=10a63a0ae80000


Tested on:

commit:         a5e17002 net/ipv6: insert the fib6 gc_link of a fib6_i..
git tree:       https://github.com/ThinkerYzu/linux.git fix-fib6_set_expires_locked
kernel config:  https://syzkaller.appspot.com/x/.config?x=f8715b6ede5c4b90
dashboard link: https://syzkaller.appspot.com/bug?extid=c15aa445274af8674f41
compiler:       gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40

Note: no patches were applied.

       reply	other threads:[~2023-12-08  0:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <93835aea-7f9a-4026-ad45-c9d5ab62a3d3@gmail.com>
2023-12-08  0:08 ` syzbot [this message]
     [not found] <2b51ae8f-141e-4663-9aea-85bd338bbb0a@gmail.com>
2024-01-30 23:55 ` [syzbot] [net?] WARNING in ip6_route_info_create syzbot
     [not found] <d7b5e144-7d10-40cd-abd6-91578d29fb3f@gmail.com>
2024-01-29 23:38 ` syzbot
     [not found] <3aef3775-1468-41e6-846d-35d740852889@gmail.com>
2024-01-29 22:36 ` syzbot
     [not found] <990fd3ca-fdb6-4e8e-96ae-b7e939060d7b@gmail.com>
2024-01-29 22:07 ` syzbot
     [not found] <a24c6301-3408-4bf6-9c56-99685e1c8e47@gmail.com>
2024-01-29 21:40 ` syzbot
     [not found] <2527e5c5-f99c-4f1c-bd46-ed97060e8ca8@gmail.com>
2023-12-08  0:49 ` syzbot
     [not found] <41525f35-14b4-4179-8ec2-10a5c42cb9cd@gmail.com>
2023-12-07 23:43 ` syzbot
2023-12-07 18:17 syzbot
2023-12-07 18:19 ` Eric Dumazet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=000000000000e3666a060bf460ae@google.com \
    --to=syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sinquersw@gmail.com \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.