From: syzbot <syzbot+ef5de9c4f99c4edb4e49@syzkaller.appspotmail.com>
To: andreyknvl@google.com, linux-usb@vger.kernel.org,
oneukum@suse.com, syzkaller-bugs@googlegroups.com
Subject: Re: KASAN: use-after-free Read in usbhid_power
Date: Wed, 24 Jul 2019 14:16:01 -0700 [thread overview]
Message-ID: <000000000000ebd2de058e73d059@google.com> (raw)
In-Reply-To: <1564001709.4670.10.camel@suse.com>
Hello,
syzbot tried to test the proposed patch but build/boot failed:
T1] devtmpfs: initialized
[ 2.873454][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 2.873454][ T1] futex hash table entries: 512 (order: 4, 65536
bytes, linear)
[ 2.875783][ T1] PM: RTC time: 21:05:06, date: 2019-07-24
[ 2.882105][ T1] NET: Registered protocol family 16
[ 2.886588][ T1] audit: initializing netlink subsys (disabled)
[ 2.888579][ T22] audit: type=2000 audit(1564002306.507:1):
state=initialized audit_enabled=0 res=1
[ 2.888579][ T1] cpuidle: using governor menu
[ 2.893505][ T1] ACPI: bus type PCI registered
[ 2.894935][ T1] PCI: Using configuration type 1 for base access
[ 3.002926][ T1] HugeTLB registered 2.00 MiB page size, pre-allocated
0 pages
[ 3.003285][ T27] cryptomgr_test (27) used greatest stack depth: 30208
bytes left
[ 3.003285][ T29] kworker/u4:0 (29) used greatest stack depth: 27608
bytes left
[ 3.011409][ T43] kworker/u4:0 (43) used greatest stack depth: 27120
bytes left
[ 3.022044][ T1] ACPI: Added _OSI(Module Device)
[ 3.022884][ T1] ACPI: Added _OSI(Processor Device)
[ 3.023651][ T1] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.031207][ T1] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.031207][ T1] ACPI: Added _OSI(Linux-Dell-Video)
[ 3.031249][ T1] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 3.032156][ T1] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 3.082907][ T1] ACPI: 2 ACPI AML tables successfully acquired and
loaded
[ 3.097843][ T1] ACPI: Interpreter enabled
[ 3.098853][ T1] ACPI: (supports S0 S3 S4 S5)
[ 3.099590][ T1] ACPI: Using IOAPIC for interrupt routing
[ 3.100591][ T1] PCI: Using host bridge windows from ACPI; if
necessary, use "pci=nocrs" and report a bug
[ 3.104257][ T1] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 3.182493][ T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
00-ff])
[ 3.183851][ T1] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM
Segments MSI HPX-Type3]
[ 3.185519][ T1] acpi PNP0A03:00: fail to add MMCONFIG information,
can't access extended PCI configuration space under this bridge.
[ 3.192575][ T1] PCI host bridge to bus 0000:00
[ 3.193286][ T1] pci_bus 0000:00: root bus resource [io
0x0000-0x0cf7 window]
[ 3.194360][ T1] pci_bus 0000:00: root bus resource [io
0x0d00-0xffff window]
[ 3.195393][ T1] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 3.196522][ T1] pci_bus 0000:00: root bus resource [mem
0xc0000000-0xfebfffff window]
[ 3.197715][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.198886][ T1] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 3.204649][ T1] pci 0000:00:01.0: [8086:7110] type 00 class 0x060100
[ 3.222865][ T1] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 3.241306][ T1] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed
by PIIX4 ACPI
[ 3.245348][ T1] pci 0000:00:03.0: [1af4:1004] type 00 class 0x000000
[ 3.251166][ T1] pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc03f]
[ 3.255600][ T1] pci 0000:00:03.0: reg 0x14: [mem
0xfebfe000-0xfebfe07f]
[ 3.271694][ T1] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000
[ 3.277964][ T1] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 3.283798][ T1] pci 0000:00:04.0: reg 0x14: [mem
0xfebff000-0xfebff07f]
[ 3.310020][ T1] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 3.314509][ T1] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 3.318340][ T1] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 3.322364][ T1] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 3.324796][ T1] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 3.332253][ T1] vgaarb: loaded
[ 3.333359][ T1] SCSI subsystem initialized
[ 3.334153][ T1] ACPI: bus type USB registered
[ 3.334153][ T1] usbcore: registered new interface driver usbfs
[ 3.334153][ T1] usbcore: registered new interface driver hub
[ 3.341195][ T1] usbcore: registered new device driver usb
[ 3.341471][ T1] mc: Linux media interface: v0.10
[ 3.342295][ T1] videodev: Linux video capture interface: v2.00
[ 3.343599][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 3.344464][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 3.345876][ T1] PTP clock support registered
[ 3.346781][ T1] EDAC MC: Ver: 3.0.0
[ 3.346781][ T1] Advanced Linux Sound Architecture Driver Initialized.
[ 3.346781][ T1] PCI: Using ACPI for IRQ routing
[ 3.353286][ T1] Bluetooth: Core ver 2.22
[ 3.354202][ T1] NET: Registered protocol family 31
[ 3.354955][ T1] Bluetooth: HCI device and connection manager
initialized
[ 3.355989][ T1] Bluetooth: HCI socket layer initialized
[ 3.356767][ T1] Bluetooth: L2CAP socket layer initialized
[ 3.357644][ T1] Bluetooth: SCO socket layer initialized
[ 3.358472][ T1] NET: Registered protocol family 8
[ 3.359220][ T1] NET: Registered protocol family 20
[ 3.360093][ T1] NetLabel: Initializing
[ 3.360715][ T1] NetLabel: domain hash size = 128
[ 3.361148][ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 3.362492][ T1] NetLabel: unlabeled traffic allowed by default
[ 3.363724][ T1] nfc: nfc_init: NFC Core ver 0.1
[ 3.363724][ T1] NET: Registered protocol family 39
[ 3.365420][ T1] clocksource: Switched to clocksource kvm-clock
[ 4.371843][ T1] VFS: Disk quotas dquot_6.6.0
[ 4.372992][ T1] VFS: Dquot-cache hash table entries: 512 (order 0,
4096 bytes)
[ 4.374598][ T1] *** VALIDATE hugetlbfs ***
[ 4.376107][ T1] pnp: PnP ACPI init
[ 4.387313][ T1] pnp: PnP ACPI: found 7 devices
[ 4.413711][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 4.413717][ T1] thermal_sys: Registered thermal governor 'user_space'
[ 4.419892][ T1] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 4.422972][ T1] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7
window]
[ 4.424189][ T1] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff
window]
[ 4.425394][ T1] pci_bus 0000:00: resource 6 [mem
0x000a0000-0x000bffff window]
[ 4.426791][ T1] pci_bus 0000:00: resource 7 [mem
0xc0000000-0xfebfffff window]
[ 4.428947][ T1] NET: Registered protocol family 2
[ 4.431371][ T1] tcp_listen_portaddr_hash hash table entries: 4096
(order: 6, 294912 bytes, linear)
[ 4.433417][ T1] TCP established hash table entries: 65536 (order: 7,
524288 bytes, linear)
[ 4.435847][ T1] TCP bind hash table entries: 65536 (order: 10,
4194304 bytes, linear)
[ 4.443410][ T1] TCP: Hash tables configured (established 65536 bind
65536)
[ 4.445306][ T1] UDP hash table entries: 4096 (order: 7, 655360
bytes, linear)
[ 4.447824][ T1] UDP-Lite hash table entries: 4096 (order: 7, 655360
bytes, linear)
[ 4.450432][ T1] NET: Registered protocol family 1
[ 4.453345][ T1] RPC: Registered named UNIX socket transport module.
[ 4.454510][ T1] RPC: Registered udp transport module.
[ 4.455454][ T1] RPC: Registered tcp transport module.
[ 4.456446][ T1] RPC: Registered tcp NFSv4.1 backchannel transport
module.
[ 4.458621][ T1] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.459864][ T1] PCI: CLS 0 bytes, default 64
[ 4.461378][ T1] PCI-DMA: Using software bounce buffering for IO
(SWIOTLB)
[ 4.462761][ T1] software IO TLB: mapped [mem 0xbbffd000-0xbfffd000]
(64MB)
[ 4.466413][ T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed
counters, 10737418240 ms ovfl timer
[ 4.467994][ T1] clocksource: tsc: mask: 0xffffffffffffffff
max_cycles: 0x212735223b2, max_idle_ns: 440795277976 ns
[ 4.469791][ T1] clocksource: Switched to clocksource tsc
[ 4.473423][ T1] check: Scanning for low memory corruption every 60
seconds
[ 4.478343][ T1] Initialise system trusted keyrings
[ 4.479810][ T1] workingset: timestamp_bits=40 max_order=21
bucket_order=0
[ 4.521420][ T1] NFS: Registering the id_resolver key type
[ 4.522729][ T1] Key type id_resolver registered
[ 4.523526][ T1] Key type id_legacy registered
[ 4.524942][ T1] 9p: Installing v9fs 9p2000 file system support
[ 4.531784][ T1] Key type asymmetric registered
[ 4.532779][ T1] Asymmetric key parser 'x509' registered
[ 4.533772][ T1] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 247)
[ 4.535226][ T1] io scheduler mq-deadline registered
[ 4.536032][ T1] io scheduler kyber registered
[ 4.539777][ T1] usbcore: registered new interface driver udlfb
[ 4.541021][ T1] usbcore: registered new interface driver smscufx
[ 4.543014][ T1] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.544520][ T1] ACPI: Power Button [PWRF]
[ 4.545743][ T1] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 4.547129][ T1] ACPI: Sleep Button [SLPF]
[ 4.560609][ T1] PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 4.562043][ T1] virtio-pci 0000:00:03.0: virtio_pci: leaving for
legacy driver
[ 4.575190][ T1] PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 4.576547][ T1] virtio-pci 0000:00:04.0: virtio_pci: leaving for
legacy driver
[ 4.582237][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing
enabled
[ 4.606272][ T1] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
115200) is a 16550A
[ 4.631884][ T1] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
115200) is a 16550A
[ 4.656881][ T1] 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud =
115200) is a 16550A
[ 4.682193][ T1] 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud =
115200) is a 16550A
[ 4.687302][ T1] Non-volatile memory driver v1.3
[ 4.688815][ T1] Linux agpgart interface v0.103
[ 4.695497][ T1] usbcore: registered new interface driver udl
[ 4.719445][ T1] loop: module loaded
[ 4.721039][ T1] usbcore: registered new interface driver rtsx_usb
[ 4.723136][ T1] usbcore: registered new interface driver viperboard
[ 4.725065][ T1] usbcore: registered new interface driver dln2
[ 4.726853][ T1] usbcore: registered new interface driver pn533_usb
[ 4.729089][ T1] usbcore: registered new interface driver port100
[ 4.731604][ T1] usbcore: registered new interface driver nfcmrvl
[ 4.746210][ T1] scsi host0: Virtio SCSI HBA
[ 4.792288][ T1] kasan: CONFIG_KASAN_INLINE enabled
[ 4.793729][ T1] kasan: GPF could be caused by NULL-ptr deref or user
memory access
[ 4.795771][ T1] general protection fault: 0000 [#1] SMP KASAN
[ 4.797547][ T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1+
#1
[ 4.799786][ T1] Hardware name: Google Google Compute Engine/Google
Compute Engine, BIOS Google 01/01/2011
[ 4.801153][ T1] RIP: 0010:dma_direct_max_mapping_size+0x73/0x19a
[ 4.801153][ T1] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 1e
01 00 00 48 8b 9d 38 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1
ea 03 <80> 3c 02 00 0f 85 06 01 00 00 48 8d bd 48 03 00 00 48 8b 1b 48 b8
[ 4.801153][ T1] RSP: 0000:ffff8881da18f628 EFLAGS: 00010246
[ 4.801153][ T1] RAX: dffffc0000000000 RBX: 0000000000000000 RCX:
ffffffff812d716c
[ 4.801153][ T1] RDX: 0000000000000000 RSI: ffffffff812d7189 RDI:
ffff8881d829fa78
[ 4.801153][ T1] RBP: ffff8881d829f740 R08: ffff8881da180000 R09:
ffffed103ad210cb
[ 4.801153][ T1] R10: ffffed103ad210ca R11: ffff8881d6908657 R12:
ffff8881d829f740
[ 4.801153][ T1] R13: ffff8881d76a57b0 R14: 0000000000000200 R15:
0000000000000000
[ 4.801153][ T1] FS: 0000000000000000(0000)
GS:ffff8881db300000(0000) knlGS:0000000000000000
[ 4.801153][ T1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.801153][ T1] CR2: 0000000000000000 CR3: 0000000006a21000 CR4:
00000000001406e0
[ 4.801153][ T1] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 4.801153][ T1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 4.801153][ T1] Call Trace:
[ 4.801153][ T1] dma_max_mapping_size+0xb5/0xf0
[ 4.801153][ T1] __scsi_init_queue+0x17e/0x510
[ 4.801153][ T1] scsi_mq_alloc_queue+0xcb/0x170
[ 4.801153][ T1] scsi_alloc_sdev+0x82e/0xc50
[ 4.801153][ T1] scsi_probe_and_add_lun+0x1ee5/0x2cd0
[ 4.801153][ T1] ? find_held_lock+0x2d/0x110
[ 4.801153][ T1] ? __pm_runtime_resume+0x111/0x180
[ 4.801153][ T1] ? scsi_alloc_sdev+0xc50/0xc50
[ 4.801153][ T1] ? mark_held_locks+0x9f/0xe0
[ 4.801153][ T1] ? _raw_spin_unlock_irqrestore+0x3e/0x50
[ 4.801153][ T1] ? lockdep_hardirqs_on+0x379/0x580
[ 4.801153][ T1] __scsi_scan_target+0x273/0xc30
[ 4.801153][ T1] ? find_held_lock+0x2d/0x110
[ 4.801153][ T1] ? __pm_runtime_resume+0x111/0x180
[ 4.801153][ T1] ? scsi_probe_and_add_lun+0x2cd0/0x2cd0
[ 4.801153][ T1] ? mark_lock+0xbc/0x1130
[ 4.801153][ T1] scsi_scan_channel.part.0+0x126/0x1a0
[ 4.801153][ T1] scsi_scan_host_selected+0x2bb/0x3f0
[ 4.801153][ T1] do_scsi_scan_host+0x1e8/0x260
[ 4.801153][ T1] scsi_scan_host+0x37c/0x440
[ 4.801153][ T1] virtscsi_probe+0x9b7/0xbb5
[ 4.801153][ T1] ? virtscsi_restore+0x240/0x240
[ 4.801153][ T1] virtio_dev_probe+0x463/0x710
[ 4.801153][ T1] ? virtio_device_restore+0x1f0/0x1f0
[ 4.801153][ T1] really_probe+0x281/0x650
[ 4.801153][ T1] driver_probe_device+0x101/0x1b0
[ 4.801153][ T1] device_driver_attach+0x108/0x140
[ 4.801153][ T1] __driver_attach+0xda/0x240
[ 4.801153][ T1] ? device_driver_attach+0x140/0x140
[ 4.801153][ T1] bus_for_each_dev+0x14b/0x1d0
[ 4.801153][ T1] ? subsys_dev_iter_exit+0x20/0x20
[ 4.801153][ T1] bus_add_driver+0x44e/0x5a0
[ 4.801153][ T1] driver_register+0x1c4/0x320
[ 4.801153][ T1] ? spi_transport_init+0x132/0x132
[ 4.801153][ T1] init+0xa1/0x115
[ 4.801153][ T1] do_one_initcall+0xf0/0x614
[ 4.801153][ T1] ? perf_trace_initcall_level+0x3e0/0x3e0
[ 4.801153][ T1] ? parameq+0x110/0x160
[ 4.801153][ T1] kernel_init_freeable+0x4a9/0x596
[ 4.801153][ T1] ? rest_init+0x371/0x371
[ 4.801153][ T1] kernel_init+0xd/0x1bf
[ 4.801153][ T1] ret_from_fork+0x24/0x30
[ 4.801153][ T1] Modules linked in:
[ 4.899360][ T1] ---[ end trace 6822302347232fe4 ]---
[ 4.900898][ T1] RIP: 0010:dma_direct_max_mapping_size+0x73/0x19a
[ 4.902841][ T1] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 1e
01 00 00 48 8b 9d 38 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1
ea 03 <80> 3c 02 00 0f 85 06 01 00 00 48 8d bd 48 03 00 00 48 8b 1b 48 b8
[ 4.908805][ T1] RSP: 0000:ffff8881da18f628 EFLAGS: 00010246
[ 4.910502][ T1] RAX: dffffc0000000000 RBX: 0000000000000000 RCX:
ffffffff812d716c
[ 4.913042][ T1] RDX: 0000000000000000 RSI: ffffffff812d7189 RDI:
ffff8881d829fa78
[ 4.915172][ T1] RBP: ffff8881d829f740 R08: ffff8881da180000 R09:
ffffed103ad210cb
[ 4.917564][ T1] R10: ffffed103ad210ca R11: ffff8881d6908657 R12:
ffff8881d829f740
[ 4.919814][ T1] R13: ffff8881d76a57b0 R14: 0000000000000200 R15:
0000000000000000
[ 4.922373][ T1] FS: 0000000000000000(0000)
GS:ffff8881db300000(0000) knlGS:0000000000000000
[ 4.925294][ T1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.927267][ T1] CR2: 0000000000000000 CR3: 0000000006a21000 CR4:
00000000001406e0
[ 4.929685][ T1] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 4.931826][ T1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 4.934300][ T1] Kernel panic - not syncing: Fatal exception
[ 4.936582][ T1] Kernel Offset: disabled
[ 4.937961][ T1] Rebooting in 86400 seconds..
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=138cfa5c600000
Tested on:
commit: 1154c0b0 wip
git tree: https://github.com/google/kasan.git usb-fuzzer
kernel config: https://syzkaller.appspot.com/x/.config?x=b228fb19779df17d
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
patch: https://syzkaller.appspot.com/x/patch.diff?x=17678cc8600000
next prev parent reply other threads:[~2019-07-24 21:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-23 12:48 KASAN: use-after-free Read in usbhid_power syzbot
2019-07-24 14:17 ` Oliver Neukum
2019-07-24 14:24 ` Andrey Konovalov
2019-07-24 20:55 ` Oliver Neukum
2019-07-24 21:02 ` Alan Stern
2019-07-25 9:33 ` Oliver Neukum
2019-07-25 15:09 ` Alan Stern
2019-08-08 18:54 ` Andrey Konovalov
2019-08-08 19:37 ` Alan Stern
2019-08-09 7:35 ` AW: " Schmid, Carsten
2019-08-09 7:55 ` Greg KH
2019-08-09 9:34 ` AW: " Schmid, Carsten
2019-08-09 10:20 ` Hans de Goede
2019-08-09 10:47 ` AW: " Schmid, Carsten
2019-08-09 10:53 ` Hans de Goede
2019-08-09 12:38 ` AW: " Schmid, Carsten
2019-08-09 12:54 ` Greg KH
2019-08-09 13:00 ` AW: " Schmid, Carsten
2019-08-09 13:38 ` Greg KH
2019-08-10 11:12 ` AW: " Hans de Goede
2019-08-09 17:36 ` Andrey Konovalov
2019-08-09 18:12 ` syzbot
2019-08-12 14:29 ` Andrey Konovalov
2019-08-09 20:26 ` Oliver Neukum
2019-07-24 21:16 ` syzbot [this message]
2019-07-25 11:22 ` Andrey Konovalov
2019-07-25 12:15 ` Oliver Neukum
2019-07-25 12:27 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000ebd2de058e73d059@google.com \
--to=syzbot+ef5de9c4f99c4edb4e49@syzkaller.appspotmail.com \
--cc=andreyknvl@google.com \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.