From: syzbot <syzbot+916742d5d24f6c254761@syzkaller.appspotmail.com>
To: eadavis@qq.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [usb?] KASAN: slab-use-after-free Read in hdm_disconnect
Date: Mon, 29 Jul 2024 23:55:03 -0700 [thread overview]
Message-ID: <000000000000fc3703061e717415@google.com> (raw)
In-Reply-To: <tencent_55464A0A741D765767043CCB37A896943709@qq.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: slab-use-after-free Read in hdm_disconnect
usb 1-1: New USB device found, idVendor=0424, idProduct=c001, bcdDevice=1c.8f
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: config 0 descriptor??
usb 1-1: USB disconnect, device number 2
==================================================================
BUG: KASAN: slab-use-after-free in hdm_disconnect+0x227/0x250 drivers/most/most_usb.c:1125
Read of size 8 at addr ffff8881131c1898 by task kworker/0:1/9
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.10.0-syzkaller-11840-g933069701c1b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
hdm_disconnect+0x227/0x250 drivers/most/most_usb.c:1125
usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1271 [inline]
device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1294
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x396/0x9f0 drivers/base/core.c:3868
usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1418
usb_disconnect+0x2e1/0x920 drivers/usb/core/hub.c:2304
hub_port_connect drivers/usb/core/hub.c:5361 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5661 [inline]
port_event drivers/usb/core/hub.c:5821 [inline]
hub_event+0x1be4/0x4f50 drivers/usb/core/hub.c:5903
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xf20 kernel/workqueue.c:3390
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 9:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
__kasan_kmalloc+0x8f/0xa0 mm/kasan/common.c:387
kmalloc_noprof include/linux/slab.h:681 [inline]
kzalloc_noprof include/linux/slab.h:807 [inline]
hdm_probe+0xb3/0x1880 drivers/most/most_usb.c:959
usb_probe_interface+0x309/0x9d0 drivers/usb/core/driver.c:399
call_driver_probe drivers/base/dd.c:578 [inline]
really_probe+0x23e/0xa90 drivers/base/dd.c:656
__driver_probe_device+0x1de/0x440 drivers/base/dd.c:798
driver_probe_device+0x4c/0x1b0 drivers/base/dd.c:828
__device_attach_driver+0x1df/0x310 drivers/base/dd.c:956
bus_for_each_drv+0x157/0x1e0 drivers/base/bus.c:457
__device_attach+0x1e8/0x4e0 drivers/base/dd.c:1028
bus_probe_device+0x17f/0x1c0 drivers/base/bus.c:532
device_add+0x114b/0x1a70 drivers/base/core.c:3679
usb_set_configuration+0x10cb/0x1c50 drivers/usb/core/message.c:2210
usb_generic_driver_probe+0xb1/0x110 drivers/usb/core/generic.c:254
usb_probe_device+0xec/0x3e0 drivers/usb/core/driver.c:294
call_driver_probe drivers/base/dd.c:578 [inline]
really_probe+0x23e/0xa90 drivers/base/dd.c:656
__driver_probe_device+0x1de/0x440 drivers/base/dd.c:798
driver_probe_device+0x4c/0x1b0 drivers/base/dd.c:828
__device_attach_driver+0x1df/0x310 drivers/base/dd.c:956
bus_for_each_drv+0x157/0x1e0 drivers/base/bus.c:457
__device_attach+0x1e8/0x4e0 drivers/base/dd.c:1028
bus_probe_device+0x17f/0x1c0 drivers/base/bus.c:532
device_add+0x114b/0x1a70 drivers/base/core.c:3679
usb_new_device+0xd90/0x1a10 drivers/usb/core/hub.c:2651
hub_port_connect drivers/usb/core/hub.c:5521 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5661 [inline]
port_event drivers/usb/core/hub.c:5821 [inline]
hub_event+0x2e66/0x4f50 drivers/usb/core/hub.c:5903
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xf20 kernel/workqueue.c:3390
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 9:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
poison_slab_object+0xf7/0x160 mm/kasan/common.c:240
__kasan_slab_free+0x14/0x30 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2252 [inline]
slab_free mm/slub.c:4473 [inline]
kfree+0x10b/0x380 mm/slub.c:4594
device_release+0xa1/0x240 drivers/base/core.c:2581
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1fa/0x5b0 lib/kobject.c:737
put_device drivers/base/core.c:3787 [inline]
device_unregister+0x2f/0xc0 drivers/base/core.c:3910
hdm_disconnect+0x10b/0x250 drivers/most/most_usb.c:1123
usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1271 [inline]
device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1294
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x396/0x9f0 drivers/base/core.c:3868
usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1418
usb_disconnect+0x2e1/0x920 drivers/usb/core/hub.c:2304
hub_port_connect drivers/usb/core/hub.c:5361 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5661 [inline]
port_event drivers/usb/core/hub.c:5821 [inline]
hub_event+0x1be4/0x4f50 drivers/usb/core/hub.c:5903
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xf20 kernel/workqueue.c:3390
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The buggy address belongs to the object at ffff8881131c0000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 6296 bytes inside of
freed 8192-byte region [ffff8881131c0000, ffff8881131c2000)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1131c0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: 0xfdffffff(slab)
raw: 0200000000000040 ffff888100042280 ffffea00040ff000 dead000000000002
raw: 0000000000000000 0000000000020002 00000001fdffffff 0000000000000000
head: 0200000000000040 ffff888100042280 ffffea00040ff000 dead000000000002
head: 0000000000000000 0000000000020002 00000001fdffffff 0000000000000000
head: 0200000000000003 ffffea00044c7001 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 2651, tgid 2651 (syz-executor), ts 39969872238, free_ts 37861985419
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1493
prep_new_page mm/page_alloc.c:1501 [inline]
get_page_from_freelist+0x1311/0x25f0 mm/page_alloc.c:3438
__alloc_pages_noprof+0x21e/0x2290 mm/page_alloc.c:4696
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
alloc_slab_page+0x4e/0xf0 mm/slub.c:2321
allocate_slab mm/slub.c:2484 [inline]
new_slab+0x84/0x260 mm/slub.c:2537
___slab_alloc+0xdac/0x1870 mm/slub.c:3723
__slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3813
__slab_alloc_node mm/slub.c:3866 [inline]
slab_alloc_node mm/slub.c:4025 [inline]
__kmalloc_cache_noprof+0x27a/0x2c0 mm/slub.c:4184
kmalloc_noprof include/linux/slab.h:681 [inline]
kzalloc_noprof include/linux/slab.h:807 [inline]
cgroup1_root_to_use kernel/cgroup/cgroup-v1.c:1217 [inline]
cgroup1_get_tree+0x936/0xed0 kernel/cgroup/cgroup-v1.c:1244
vfs_get_tree+0x8f/0x380 fs/super.c:1789
do_new_mount fs/namespace.c:3472 [inline]
path_mount+0x14e6/0x1f20 fs/namespace.c:3799
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount fs/namespace.c:3997 [inline]
__x64_sys_mount+0x294/0x320 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
page last free pid 2646 tgid 2646 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1094 [inline]
free_unref_page+0x698/0xce0 mm/page_alloc.c:2608
rcu_do_batch kernel/rcu/tree.c:2569 [inline]
rcu_core+0x828/0x16b0 kernel/rcu/tree.c:2843
handle_softirqs+0x209/0x8e0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0xac/0x110 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0x43/0xb0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
Memory state around the buggy address:
ffff8881131c1780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131c1800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131c1880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131c1900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131c1980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Tested on:
commit: 93306970 Merge tag '6.11-rc-smb3-server-fixes' of git:..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
console output: https://syzkaller.appspot.com/x/log.txt?x=1402a373980000
kernel config: https://syzkaller.appspot.com/x/.config?x=f828342678294017
dashboard link: https://syzkaller.appspot.com/bug?extid=916742d5d24f6c254761
compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=1022d19d980000
next prev parent reply other threads:[~2024-07-30 6:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 11:32 [syzbot] [usb?] KASAN: slab-use-after-free Read in hdm_disconnect syzbot
2024-07-30 5:40 ` Edward Adam Davis
2024-07-30 5:54 ` syzbot
2024-07-30 5:58 ` Edward Adam Davis
2024-07-30 6:09 ` syzbot
2024-07-30 6:29 ` Edward Adam Davis
2024-07-30 6:55 ` syzbot [this message]
2025-06-16 16:03 ` [syzbot] #syz test https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git e04c78d86a9699d136910cfc0bdcf01087e3267e syzbot
-- strict thread matches above, loose matches on Subject: below --
2024-07-30 3:07 [PATCH] usb: slab-use-after-free Read in hdm_disconnect Camila Alvarez
2024-07-30 3:56 ` [syzbot] [usb?] KASAN: " syzbot
[not found] <a454ce9b-807c-4f22-98fa-80a7da98e2a9@yandex.ru>
2025-06-16 16:41 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000fc3703061e717415@google.com \
--to=syzbot+916742d5d24f6c254761@syzkaller.appspotmail.com \
--cc=eadavis@qq.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.