From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srivatsan Date: Fri, 15 Apr 2005 15:29:10 +0530 Subject: [U-Boot-Users] U-boot Port issue on MPC8280 board In-Reply-To: <20050412175407.BA4C812379@sc8-sf-spam2.sourceforge.net> Message-ID: <000001c541a1$c815d020$1269cb0a@bgc.flextronics.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear all, I am trying to port U-boot 1.1.2 onto a MPC8280 based Rattler board. After a long struggle I was able to map the board properly and I am able to get till display_options (where u-boot gets a reset in printf statement). I have the following questions: 1) Are there any patches to support CPM2 (Just like the one floating around for Linux) for U-boot? (Our board requires cpm2 support) 2) Whenever we try to access the serial routines (serial_putc, printf), we get a continous reset and we are unable to proceed. I request you all to kindly help me with this problem. Any pointers would be of great help. Thanks and Best Regards, C.R.Srivatsan