RE: udev problem DVB-S/T Cards

["Razza" <rjames31@btopenworld.com>]

Matthias Schwarzott wrote on 03 May 2007 13:14:
> Yes, this is the case-statement I changed last time.
> As I did not have my changes (deleted long ago) I needed to redo it.
> Result is attached. The only change is duplicating one of those
> statementes.
> 
> By the way: why isnt there just
> case "$TYPE" in
>   block|scsi_tape|input)
>     ...
>     ;;
>   *)
> esac
> as the code is the same in every place?
> 
> The reason for no longer doing this, is that I talked to linuxtv guys,
> and they told me they do not support such stuff :(
> 
> And well, to make it general applicable you need a good scheme to
> identify the cards.
> A. by path: like above, fails with usb devices B. by pci ids: fails
> with multiple identical cards, or with switching card-slots Need to be
> improved for cards with multiple dvb-adapters (twin-tuner and
> similar)
> 
> C. by serial: some devices have serial numbers like usb, but not all
> 
> I just switched back to blacklisting all dvb-modules, and load them in
> well known order.

Matthias thanks for the work you have done, do I simply paste the contents
of your file into my path_id file?


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel