From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Brett Maurer" Date: Thu, 18 Oct 2007 17:54:27 +0900 Message-ID: <000001c81164$7ec1c8d0$4100a8c0@meritechbrett> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0001_01C811AF.EEA970D0" Subject: [B.A.T.M.A.N.] Tunnel problems... Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@open-mesh.net This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C811AF.EEA970D0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I'm a new BATMAN fan. Thanks to all who contribute. I'm having a problem with bat0. It seems to be disconnecting and I cannot find the cause. My configuration is as follows: Version: 0.3 beta rv731 Scenario: A-----B-----GW-----PC A - is on 104.0.0.3 ath0 with -s 10.0.0.10 B - is on 104.0.0.2 ath0 with -s 10.0.0.10 GW - is on 104.0.0.1 ath0 and 10.0.0.1 eth0 PC - is on 10.0.0.10 All IP addresses are static. I can see A routing through B to GW fine. The tunnel bat0 on A and B seems unstable though. I'm looking at VIS packets arriving at PC. It arrives for about 30 sec then stops for a while. It is not clear why the tunnel keeps disconnecting. If anyone can offer some advice, I'd much appreciate it. ------=_NextPart_000_0001_01C811AF.EEA970D0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

I’m a new BATMAN fan. Thanks to all who = contribute.

 

I’m having a problem with bat0. It seems to be disconnecting and I cannot find the cause. My configuration is as = follows:

 

Version:

0.3 beta rv731

 

Scenario:

 

A-----B-----GW-----PC

 

A – is on 104.0.0.3 ath0 with –s = 10.0.0.10

B – is on 104.0.0.2 ath0 with –s = 10.0.0.10

GW – is on 104.0.0.1 ath0 and 10.0.0.1 = eth0

PC – is on = 10.0.0.10

 

All IP addresses are = static.

 

I can see A routing through B to GW fine. The tunnel = bat0 on A and B seems unstable though. I’m looking at VIS packets arriving at PC. It arrives for about 30 sec then stops for a = while. It is not clear why the tunnel keeps disconnecting. =

 

If anyone can offer some advice, I’d much = appreciate it.

------=_NextPart_000_0001_01C811AF.EEA970D0--