From: "Gert-Jan van der Stroom" <gjstroom@gmail.com>
To: <linux-media@vger.kernel.org>
Subject: RE: Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using media_build
Date: Fri, 27 Feb 2015 00:03:46 +0100 [thread overview]
Message-ID: <000001d05218$798ad9e0$6ca08da0$@gmail.com> (raw)
In-Reply-To: <002e01d04f87$c09c1c60$41d45520$@gmail.com>
> -----Original Message-----
> From: Gert-Jan van der Stroom [mailto:gjstroom@gmail.com]
> Sent: maandag 23 februari 2015 17:43
> To: linux-media-owner@vger.kernel.org
> Cc: 'Mauro Carvalho Chehab'
> Subject: RE: Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using
> media_build
>
> > -----Original Message-----
> > From: Mauro Carvalho Chehab [mailto:mchehab@osg.samsung.com]
> > Sent: zondag 22 februari 2015 22:55
> > To: Antti Palosaari
> > Cc: Gert-Jan van der Stroom; linux-media@vger.kernel.org
> > Subject: Re: Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45)
> > using media_build
> >
> > Em Sun, 22 Feb 2015 23:35:52 +0200
> > Antti Palosaari <crope@iki.fi> escreveu:
> >
> > > Mauro,
> > > could you fix your media controller stuff ASAP as I think almost all
> > > DVB devices are currently broken. I have got multiple bug reports....
> >
> > That looks weird... I think the patch adding media controller support
> > for
> the
> > dvb-usb was not merged yet.
> >
> > >
> > > On 02/22/2015 03:17 PM, Gert-Jan van der Stroom wrote:
> > > > Can someone help me to get a Mygica T230 DVB-T/T2/C working on
> > > > Ubuntu 14.04 (kernel 3.13.0-45) using media_build.
> > > > I succeed doing a build of the media_build, the drivers also load
> > > > when I attach the Mygica, but when I try to use it (tvheadend) it
> crashes:
> > > >
> > > > [ 61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm
> state.
> > > > [ 61.828138] dvb-usb: will pass the complete MPEG2 transport
stream
> to
> > the
> > > > software demuxer.
> > > > [ 61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
> > > > [ 61.847369] i2c i2c-7: Added multiplexed i2c bus 8
> > > > [ 61.847372] si2168 7-0064: Silicon Labs Si2168 successfully
> attached
> > > > [ 61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
> > > > successfully attached
> > > > [ 61.857034] usb 1-5: DVB: registering adapter 0 frontend 0
(Silicon
> Labs
> > > > Si2168)...
> > > > [ 61.857488] input: IR-receiver inside an USB DVB receiver as
> > > > /devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
> > > > [ 61.857541] dvb-usb: schedule remote query interval to 100 msecs.
> > > > [ 61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully
> initialized
> > and
> > > > connected.
> > > > [ 61.857773] usbcore: registered new interface driver
dvb_usb_cxusb
> > > >
> > > > Tvheadend start:
> > > > [ 314.356162] BUG: unable to handle kernel NULL pointer
> > > > dereference at
> > > > 0000000000000010
> > > > [ 314.356202] IP: [<ffffffffa02ef74c>]
> > > > media_entity_pipeline_start+0x1c/0x390 [media]
> > >
> > >
> > > ^^^^^^^^^^^^ problem is that I think
> > >
> > >
> > > > [ 314.356236] PGD 76c6c067 PUD 766b0067 PMD 0 [ 314.356260]
> Oops:
> > > > 0000 [#1] SMP [ 314.356279] Modules linked in: si2157(OX)
> > > > si2168(OX) i2c_mux
> > > > dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX)
> > > > media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap
> > > > coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich
> > > > snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm
> > snd_page_alloc
> > > > snd_timer pl2303 video wmi tpm_infineon drm mac_hid mei_me snd
> > > > soundcore i2c_algo_bit usbserial mei lp parport psmouse e1000e
> > > > floppy
> > ptp pps_core pata_acpi
> > > > [ 314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G
> W
> > OX
> > > > 3.13.0-45-generic #74-Ubuntu
> >
> > Gert-Jan,
> >
> > Could you please post the stack dump? It would help to know what's
> > calling media_entity_pipeline_start.
> >
> > Regards,
> > Mauro
> >
> [Gert-Jan van der Stroom]
>
> Here's the complete dmesg:
>
> [ 61.356038] usb 1-5: new high-speed USB device number 5 using ehci-pci
> [ 61.488897] usb 1-5: New USB device found, idVendor=0572,
> idProduct=c688
> [ 61.488901] usb 1-5: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 61.488904] usb 1-5: Product: USB Stick
> [ 61.488906] usb 1-5: Manufacturer: Max
> [ 61.488908] usb 1-5: SerialNumber: 080116
> [ 61.541984] media: module verification failed: signature and/or
required
> key missing - tainting kernel
> [ 61.542468] media: Linux media interface: v0.10
> [ 61.546376] WARNING: You are using an experimental version of the
> media
> stack.
> [ 61.546376] As the driver is backported to an older kernel, it doesn't
> offer
> [ 61.546376] enough quality for its usage in production.
> [ 61.546376] Use it with care.
> [ 61.546376] Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> [ 61.546376] 135f9be9194cf7778eb73594aa55791b229cf27c [media]
> dvb_frontend: start media pipeline while thread is running
> [ 61.546376] 0f0fa90bd035fa15106799b813d4f0315d99f47e [media]
> cx231xx:
> enable tuner->decoder link at videobuf start
> [ 61.546376] 9239effd53d47e3cd9c653830c8465c0a3a427dc [media]
> dvb-frontend: enable tuner link when the FE thread starts
> [ 61.564631] WARNING: You are using an experimental version of the
> media
> stack.
> [ 61.564631] As the driver is backported to an older kernel, it doesn't
> offer
> [ 61.564631] enough quality for its usage in production.
> [ 61.564631] Use it with care.
> [ 61.564631] Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> [ 61.564631] 135f9be9194cf7778eb73594aa55791b229cf27c [media]
> dvb_frontend: start media pipeline while thread is running
> [ 61.564631] 0f0fa90bd035fa15106799b813d4f0315d99f47e [media]
> cx231xx:
> enable tuner->decoder link at videobuf start
> [ 61.564631] 9239effd53d47e3cd9c653830c8465c0a3a427dc [media]
> dvb-frontend: enable tuner link when the FE thread starts
> [ 61.592114] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
> [ 61.828138] dvb-usb: will pass the complete MPEG2 transport stream to
> the
> software demuxer.
> [ 61.828279] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
> [ 61.847369] i2c i2c-7: Added multiplexed i2c bus 8
> [ 61.847372] si2168 7-0064: Silicon Labs Si2168 successfully attached
> [ 61.857024] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158
> successfully attached
> [ 61.857034] usb 1-5: DVB: registering adapter 0 frontend 0 (Silicon
Labs
> Si2168)...
> [ 61.857488] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1a.7/usb1/1-5/input/input11
> [ 61.857541] dvb-usb: schedule remote query interval to 100 msecs.
> [ 61.857709] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized
and
> connected.
> [ 61.857773] usbcore: registered new interface driver dvb_usb_cxusb
> [ 314.356162] BUG: unable to handle kernel NULL pointer dereference at
> 0000000000000010
> [ 314.356202] IP: [<ffffffffa02ef74c>]
> media_entity_pipeline_start+0x1c/0x390 [media] [ 314.356236] PGD
> 76c6c067 PUD 766b0067 PMD 0 [ 314.356260] Oops: 0000 [#1] SMP [
> 314.356279] Modules linked in: si2157(OX) si2168(OX) i2c_mux
> dvb_usb_cxusb(OX) dib0070(OX) dvb_usb(OX) dvb_core(OX) rc_core(OX)
> media(OX) snd_hda_codec_analog gpio_ich hp_wmi sparse_keymap
> coretemp kvm_intel kvm serio_raw snd_hda_intel i915 lpc_ich
> snd_hda_codec shpchp drm_kms_helper snd_hwdep snd_pcm
> snd_page_alloc snd_timer pl2303 video wmi tpm_infineon drm mac_hid
> mei_me snd soundcore i2c_algo_bit usbserial mei lp parport psmouse
> e1000e floppy ptp pps_core pata_acpi
> [ 314.356541] CPU: 1 PID: 1053 Comm: kdvb-ad-0-fe-0 Tainted: G W
OX
> 3.13.0-45-generic #74-Ubuntu
> [ 314.356574] Hardware name: Hewlett-Packard HP Compaq dc7900 Ultra-
> Slim Desktop/3033h, BIOS 786G1 v01.26 07/12/2011 [ 314.356609] task:
> ffff880036cd4800 ti: ffff880075f7a000 task.ti:
> ffff880075f7a000
> [ 314.356635] RIP: 0010:[<ffffffffa02ef74c>] [<ffffffffa02ef74c>]
> media_entity_pipeline_start+0x1c/0x390 [media] [ 314.356673] RSP:
> 0018:ffff880075f7bcd0 EFLAGS: 00010282 [ 314.356693] RAX:
> 0000000000000000 RBX: 0000000000000000 RCX:
> 0000000000000000
> [ 314.356717] RDX: 0000000000000000 RSI: ffff88007495a264 RDI:
> 0000000000000000
> [ 314.356743] RBP: ffff880075f7be40 R08: ffff880075f7a000 R09:
> ffff88007495a000
> [ 314.356767] R10: 00000000000001d1 R11: 0000000000000204 R12:
> ffff880076736830
> [ 314.356792] R13: ffff880076736830 R14: 0000000000000000 R15:
> ffff88007495a000
> [ 314.356817] FS: 0000000000000000(0000) GS:ffff88007b680000(0000)
> knlGS:0000000000000000
> [ 314.356845] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [
> 314.356866] CR2: 0000000000000010 CR3: 000000007672f000 CR4:
> 00000000000407e0
> [ 314.356891] Stack:
> [ 314.356901] ffff880075e14800 ffff88007b613540 ffff880075e14800
> ffff880075f7bcf8
> [ 314.356936] ffffffff8109edc8 ffff880075f7bd40 ffffffff810a515d
> ffff880075f7bd18
> [ 314.356971] ffffffff8101bc23 ffff880075e14800 ffff88007b613540
> ffff88007b6134c0
> [ 314.357006] Call Trace:
> [ 314.357021] [<ffffffff8109edc8>] ? __enqueue_entity+0x78/0x80 [
> 314.357043] [<ffffffff810a515d>] ? enqueue_entity+0x2ad/0xbb0 [
> 314.357066] [<ffffffff8101bc23>] ? native_sched_clock+0x13/0x80 [
> 314.358166] [<ffffffff810a2f54>] ? update_curr+0xe4/0x180 [ 314.359255]
> [<ffffffff810a3442>] ? dequeue_entity+0x142/0x5c0 [ 314.360146]
> [<ffffffff810981c5>] ? check_preempt_curr+0x75/0xa0 [ 314.360146]
> [<ffffffff8101bc23>] ? native_sched_clock+0x13/0x80 [ 314.360146]
> [<ffffffff810a3d0e>] ? dequeue_task_fair+0x44e/0x660 [ 314.360146]
> [<ffffffff8109d4e8>] ? sched_clock_cpu+0xa8/0x100 [ 314.360146]
> [<ffffffff810125c6>] ? __switch_to+0x126/0x4c0 [ 314.360146]
> [<ffffffffa037649b>] dvb_frontend_thread+0x33b/0x970 [dvb_core] [
> 314.360146] [<ffffffff81724e61>] ? __schedule+0x381/0x7d0 [ 314.360146]
> [<ffffffffa0376160>] ?
> dvb_frontend_ioctl_legacy.isra.8+0xce0/0xce0 [dvb_core] [ 314.360146]
> [<ffffffff8108b572>] kthread+0xd2/0xf0 [ 314.360146]
[<ffffffff8108b4a0>]
> ? kthread_create_on_node+0x1c0/0x1c0
> [ 314.360146] [<ffffffff817318bc>] ret_from_fork+0x7c/0xb0 [
> 314.360146] [<ffffffff8108b4a0>] ? kthread_create_on_node+0x1c0/0x1c0
> [ 314.360146] Code: cb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66
> 66 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 81 ec 48 01 00 00
> <48> 8b 47 10 48 89 bd a0 fe ff ff 48 89 b5 b0 fe ff ff 48 89 85 [
314.360146]
> RIP [<ffffffffa02ef74c>]
> media_entity_pipeline_start+0x1c/0x390 [media] [ 314.360146] RSP
> <ffff880075f7bcd0> [ 314.360146] CR2: 0000000000000010 [ 314.360146] -
> --[ end trace 4afaa17fd66e17b4 ]---
>
> I hope you can solve it, I also get the same problem when I build the
drivers
> with media_build mips cross compiled for VU+ Solo2 which also runs kernel
> 3.13.
>
> Thanks, Gert-Jan
>
> > > >
> > > > What is wrong, or do I miss something ?
> > > > I also added the firmware described at:
> > > > http://www.linuxtv.org/wiki/index.php/Geniatech_T230
> > >
> > > regards
> > > Antti
> > >
It's working now:
[ 1460.848020] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1460.980871] usb 2-4: New USB device found, idVendor=0572, idProduct=c688
[ 1460.980875] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1460.980878] usb 2-4: Product: USB Stick
[ 1460.980881] usb 2-4: Manufacturer: Max
[ 1460.980883] usb 2-4: SerialNumber: 080116
[ 1461.036963] media: module verification failed: signature and/or required
key missing - tainting kernel
[ 1461.037383] media: Linux media interface: v0.10
[ 1461.053284] WARNING: You are using an experimental version of the media
stack.
[ 1461.053284] As the driver is backported to an older kernel, it doesn't
offer
[ 1461.053284] enough quality for its usage in production.
[ 1461.053284] Use it with care.
[ 1461.053284] Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
[ 1461.053284] 8a26a258bdb82db241cdc35f332f88dd67bdb9c9 [media] dvb core:
only start media entity if not NULL
[ 1461.053284] 99a85b901eb54f62ff0c3fd6eb56e60b7b9f15c8 Merge tag
'v4.0-rc1' into patchwork
[ 1461.053284] c517d838eb7d07bbe9507871fab3931deccff539 Linux 4.0-rc1
[ 1461.075904] WARNING: You are using an experimental version of the media
stack.
[ 1461.075904] As the driver is backported to an older kernel, it doesn't
offer
[ 1461.075904] enough quality for its usage in production.
[ 1461.075904] Use it with care.
[ 1461.075904] Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
[ 1461.075904] 8a26a258bdb82db241cdc35f332f88dd67bdb9c9 [media] dvb core:
only start media entity if not NULL
[ 1461.075904] 99a85b901eb54f62ff0c3fd6eb56e60b7b9f15c8 Merge tag
'v4.0-rc1' into patchwork
[ 1461.075904] c517d838eb7d07bbe9507871fab3931deccff539 Linux 4.0-rc1
[ 1461.124021] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 1461.360058] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 1461.360349] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
[ 1461.398223] i2c i2c-5: Added multiplexed i2c bus 6
[ 1461.398227] si2168 5-0064: Silicon Labs Si2168 successfully attached
[ 1461.409245] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[ 1461.409255] usb 2-4: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 1461.409527] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-4/input/input13
[ 1461.410733] dvb-usb: schedule remote query interval to 100 msecs.
[ 1461.410918] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and
connected.
[ 1461.410933] usbcore: registered new interface driver dvb_usb_cxusb
[ 1492.358127] si2168 5-0064: found a 'Silicon Labs Si2168-B40'
[ 1492.374658] si2168 5-0064: downloading firmware from file
'dvb-demod-si2168-b40-01.fw'
[ 1492.919874] si2168 5-0064: firmware version: 4.0.4
[ 1492.931124] si2157 6-0060: found a 'Silicon Labs Si2148-A20'
[ 1492.955098] si2157 6-0060: downloading firmware from file
'dvb-tuner-si2158-a20-01.fw'
[ 1494.008500] si2157 6-0060: firmware version: 2.1.6
[ 1494.008515] usb 2-4: DVB: adapter 0 frontend 0 frequency 0 out of range
(110000000..862000000)
prev parent reply other threads:[~2015-02-26 23:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-22 13:17 Mygica T230 DVB-T/T2/C Ubuntu 14.04 (kernel 3.13.0-45) using media_build Gert-Jan van der Stroom
2015-02-22 21:35 ` Antti Palosaari
2015-02-22 21:55 ` Mauro Carvalho Chehab
2015-02-22 22:11 ` Antti Palosaari
2015-02-23 9:01 ` Vincent McIntyre
[not found] ` <1278760656379117910@unknownmsgid>
2015-02-23 9:07 ` Vincent McIntyre
[not found] ` <002e01d04f87$c09c1c60$41d45520$@gmail.com>
2015-02-26 23:03 ` Gert-Jan van der Stroom [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000001d05218$798ad9e0$6ca08da0$@gmail.com' \
--to=gjstroom@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.