From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jacob Chan <jacob_chan@so-net.net.tw>
Date: Tue, 1 Jul 2003 17:33:18 +0800
Subject: [U-Boot-Users] How can I save zImage & fsimage.tar into Flash memory then boot
In-Reply-To: <00ec01c33faf$19ed3ab0$fe00a8c0@esd11>
Message-ID: <000101c33fb3$d183fd90$a865a8c0@ThinkPadX31>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

I am using Linux Kernel 2.4.18 with arm xscale pxa patch
By the way, Could you tell me where to download mkimage tool
Your reply and support will be highly appreciated.

Thank you for your time and attention

Jacob Chan
Jacob_chan at so-net.net.tw

-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Zhao
Hongda
Sent: Tuesday, July 01, 2003 5:00 PM
To: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] How can I save zImage & fsimage.tar into
Flash memory then boot

Could you tell me which kernel version is used?
I'm try to use mkimage to create a flash-image that can be used by
bootm,
but until now I'm failed.
                                                Hongda Zhao
----- Original Message -----
From: "Jacob Chan" <jacob_chan@so-net.net.tw>
To: "u-boot" <u-boot-users@lists.sourceforge.net>
Sent: Tuesday, July 01, 2003 4:26 PM
Subject: [U-Boot-Users] How can I save zImage & fsimage.tar into Flash
memory then boot


> Dear all,
> I am using the Intel DBPXA255 Lubbock board.
> After I download the u-boot.bin via JTAG that using BDI2000.
> It can boot but the Ethernet device(SMSC LAN91C96) is not work. So I
> using serial download(Kermit mode) zImage to the address 0xa0200000.
> loadb 0xa0200000  <-- using HyperTerminal Kermit mode to download
> After that I can using go 0xa0200000 to boot linux kernel, but how can
I
> save it to Flash?
> I try cp 0xa0200000 0x00080000 0x000a0578
> After that I reboot the target board and how can I boot the linux
> kernel?
> I use bootm 0x00080000, but it's not work.
> Finally, I wan to save u-boot.bin, zImage and filesystem.tar into
Flash
> then boot.
> What should I need to do? Your reply and support will be highly
> appreciated.
>
> Thank you for your time and attention
>
> Jacob Chan
> Jacob_chan at so-net.net.tw
>
>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
>
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>




-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users