All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Philippe" <philippe@accuitee.com>
To: <linux-mtd@lists.infradead.org>
Subject: DOC2k booting speed ...
Date: Mon, 26 Jan 2004 16:05:06 +0100	[thread overview]
Message-ID: <000501c3e41d$c858e780$247dfea9@jennifer> (raw)


Hi,
 
I’m using 
-          doc2000 (32MB)
-          via c3 800
-          linux kernel 2.4.22
-          mtd mtd-snapshot-20040124.tar.bz2
-          I use nftl
 
 
I have build a little system (kernel+initrd). My initrd is about 4MB
compressed (10MB uncompressed)
I have set up grub in the doc
 
When grub is booting, it takes 10 seconds to load the kernel and 35 seconds
to load the initrd.
 -> 5MB loaded : 45sec
 
When I boot from the Doc but with loading from the hard drive it takes 1
seconds to load the kernel and 2 seconds to load the initrd.
 -> 5MB loaded : 3sec
 
on the m-sys web, they say that the DOC2k should have a read rate about
1MB/s so if I’m right everything should be loaded in less than 10sec
 
If anyone has a clue 
 
Thanks
 
Philippe
 
 

             reply	other threads:[~2004-01-26 15:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-01-26 15:05 Philippe [this message]
2004-01-26 15:07 ` DOC2k booting speed David Woodhouse
2004-01-26 16:15   ` RE : " Philippe
2004-01-26 16:17     ` David Woodhouse
2004-01-26 16:39       ` RE : " Philippe
2004-01-26 16:51         ` David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='000501c3e41d$c858e780$247dfea9@jennifer' \
    --to=philippe@accuitee.com \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.