From mboxrd@z Thu Jan 1 00:00:00 1970 From: "AA6QN" Subject: RE: mkiss, udev and kernel 2.6 Date: Thu, 11 Nov 2004 16:56:40 -0800 Message-ID: <000601c4c852$79768360$07001aac@adminqn> References: <4187BA73.2080908@ccr.jussieu.fr> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4187BA73.2080908@ccr.jussieu.fr> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: 'Bernard Pidoux' Cc: linux-hams@vger.kernel.org I ported my Linux over to Gentoo and started off with devfs. I did try udev and it did not work for me. So, back to devfs and things are working once again. Let us know if you get it running. 73,John AA6QN -----Original Message----- From: linux-hams-owner@vger.kernel.org [mailto:linux-hams-owner@vger.kernel.org] On Behalf Of Bernard Pidoux Sent: Tuesday, November 02, 2004 8:49 AM To: unlisted-recipients:; no To-header on input Cc: linux-hams@vger.kernel.org Subject: mkiss, udev and kernel 2.6 Hi, Does someone have an experience with mkiss and udev in 2.6 kernel ? I need to use mkiss-kissattach to drive a dual port TNC 1200/9600 KPC9612. However I don't see how to set up a master-slave pseudo tty system with udev. Actually, I went through by instructing the kernel to load devfs at boot (append="devfs=mount... " in lilo.conf. But Is there any other solution with udev alone (without devfs) ? 73 de Bernard, f6bvp - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html