From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Thu, 20 Jul 2006 15:30:47 +0100 (BST) Received: from lvs00-fl-n02.ftl.affinity.com ([216.219.253.98]:16306 "EHLO lvs00-fl-n02.ftl.affinity.com") by ftp.linux-mips.org with ESMTP id S8133847AbWGTOag (ORCPT ); Thu, 20 Jul 2006 15:30:36 +0100 Received: from [24.106.202.234] ([24.106.202.234]:13062 "EHLO 3PiGAS") by ams002.ftl.affinity.com with ESMTP id S362485AbWGTOaa (ORCPT ); Thu, 20 Jul 2006 10:30:30 -0400 From: "Gary Smith" To: Subject: IDE on Swarm Date: Thu, 20 Jul 2006 10:30:28 -0400 Organization: 3 Phoenix, Inc. Message-ID: <000601c6ac09$0c262f30$6dacaac0@3PiGAS> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C6ABE7.85148F30" X-Mailer: Microsoft Office Outlook 11 Thread-Index: AcasCQvZcIj85GkSRXKQ3ZPigI/XLA== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 12039 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: gary.smith@3phoenix.com Precedence: bulk X-list: linux-mips This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C6ABE7.85148F30 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello All, I'd like to ask a question regarding a post I noticed on a message board. The post I read is as follows. http://mail.bitmover.com/pipermail/sibyte-users/2004-November/000029.html I am using a BCM91250A evaluation board with a compactflash device connected to the onboard IDE controller. When booting with a Linux 2.4.20 kernel, the IDE interface is recognized and the compactflash device is hda. When booting with a Linux 2.6.16.25 kernel, the IDE interface is recognized, but no device information is echoed to the console. I've included output below. The message post above mentions that there were problems with the IDE driver in Linux 2.6 during the late 2004 time-frame. I'd like to inquire about the current availability of the IDE driver in the kernel. Linux 2.4.20 Output: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx SiByte onboard IDE configured as device 0 hda: SanDisk SDCFB-1024, ATA DISK drive ide0 at 0xffffffffb00b3e01-0xffffffffb00b3e08,0xffffffffb00b7ec1 on irq 36 hda: 2001888 sectors (1025 MB) w/1KiB Cache, CHS=1986/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 Linux 2.6.16.25 Output: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide SWARM IDE driver ide-swarm: IDE interface at GenBus slot 4 NET: Registered protocol family 2 Thank you for your time. Gary -- Gary A. Smith, ABD PhD Systems Engineer, 3Phoenix, Inc. ------=_NextPart_000_0007_01C6ABE7.85148F30 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Hello = All,

 

I’d like to ask a question regarding a post I noticed on a message board.  = The post I read is as follows.

 

http://mail.bitmover.com/pipermail/sibyte-users/2004-No= vember/000029.html

 

I am = using a BCM91250A evaluation board with a compactflash device connected to the = onboard IDE controller.  When booting with a Linux 2.4.20 kernel, the IDE interface is recognized and the compactflash device is hda.  When = booting with a Linux 2.6.16.25 kernel, the IDE interface is recognized, but no = device information is echoed to the console.  I’ve included output below.  The message post above mentions that there were problems = with the IDE driver in Linux 2.6 during the late 2004 time-frame.  I’d = like to inquire about the current availability of the IDE driver in the = kernel.

 

 

Linux = 2.4.20 Output:

 

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: = Assuming 50MHz system bus speed for PIO modes; override with = idebus=3Dxx

SiByte = onboard IDE configured as device 0

hda: = SanDisk SDCFB-1024, ATA DISK drive

ide0 at = 0xffffffffb00b3e01-0xffffffffb00b3e08,0xffffffffb00b7ec1 on irq 36

hda: = 2001888 sectors (1025 MB) w/1KiB Cache, = CHS=3D1986/16/63

Partition check:

 /dev/ide/host0/bus0/target0/lun0: p1

 

 

 

Linux = 2.6.16.25 Output:

 

Uniform = Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: = Assuming 50MHz system bus speed for PIO modes; override with = idebus=3Dxx

ide-floppy driver 0.99.newide

SWARM = IDE driver

ide-swarm: IDE interface at GenBus slot 4

NET: = Registered protocol family 2

 

 

Thank = you for your time.

 

Gary

--

Gary A. Smith, ABD PhD
Systems Engineer, 3Phoenix, Inc.

------=_NextPart_000_0007_01C6ABE7.85148F30-- From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from lvs00-fl-n02.ftl.affinity.com ([216.219.253.98]:16306 "EHLO lvs00-fl-n02.ftl.affinity.com") by ftp.linux-mips.org with ESMTP id S8133847AbWGTOag (ORCPT ); Thu, 20 Jul 2006 15:30:36 +0100 Received: from [24.106.202.234] ([24.106.202.234]:13062 "EHLO 3PiGAS") by ams002.ftl.affinity.com with ESMTP id S362485AbWGTOaa (ORCPT ); Thu, 20 Jul 2006 10:30:30 -0400 From: "Gary Smith" Subject: IDE on Swarm Date: Thu, 20 Jul 2006 10:30:28 -0400 Message-ID: <000601c6ac09$0c262f30$6dacaac0@3PiGAS> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C6ABE7.85148F30" Return-Path: Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org To: linux-mips@linux-mips.org Message-ID: <20060720143028.ySOIlnCSVYFCUo0wiC9wTYmMaMtQmTQdNlrvBL-6PvI@z> This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C6ABE7.85148F30 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello All, I'd like to ask a question regarding a post I noticed on a message board. The post I read is as follows. http://mail.bitmover.com/pipermail/sibyte-users/2004-November/000029.html I am using a BCM91250A evaluation board with a compactflash device connected to the onboard IDE controller. When booting with a Linux 2.4.20 kernel, the IDE interface is recognized and the compactflash device is hda. When booting with a Linux 2.6.16.25 kernel, the IDE interface is recognized, but no device information is echoed to the console. I've included output below. The message post above mentions that there were problems with the IDE driver in Linux 2.6 during the late 2004 time-frame. I'd like to inquire about the current availability of the IDE driver in the kernel. Linux 2.4.20 Output: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx SiByte onboard IDE configured as device 0 hda: SanDisk SDCFB-1024, ATA DISK drive ide0 at 0xffffffffb00b3e01-0xffffffffb00b3e08,0xffffffffb00b7ec1 on irq 36 hda: 2001888 sectors (1025 MB) w/1KiB Cache, CHS=1986/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 Linux 2.6.16.25 Output: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide SWARM IDE driver ide-swarm: IDE interface at GenBus slot 4 NET: Registered protocol family 2 Thank you for your time. Gary -- Gary A. Smith, ABD PhD Systems Engineer, 3Phoenix, Inc. ------=_NextPart_000_0007_01C6ABE7.85148F30 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Hello = All,

 

I’d like to ask a question regarding a post I noticed on a message board.  = The post I read is as follows.

 

http://mail.bitmover.com/pipermail/sibyte-users/2004-No= vember/000029.html

 

I am = using a BCM91250A evaluation board with a compactflash device connected to the = onboard IDE controller.  When booting with a Linux 2.4.20 kernel, the IDE interface is recognized and the compactflash device is hda.  When = booting with a Linux 2.6.16.25 kernel, the IDE interface is recognized, but no = device information is echoed to the console.  I’ve included output below.  The message post above mentions that there were problems = with the IDE driver in Linux 2.6 during the late 2004 time-frame.  I’d = like to inquire about the current availability of the IDE driver in the = kernel.

 

 

Linux = 2.4.20 Output:

 

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: = Assuming 50MHz system bus speed for PIO modes; override with = idebus=3Dxx

SiByte = onboard IDE configured as device 0

hda: = SanDisk SDCFB-1024, ATA DISK drive

ide0 at = 0xffffffffb00b3e01-0xffffffffb00b3e08,0xffffffffb00b7ec1 on irq 36

hda: = 2001888 sectors (1025 MB) w/1KiB Cache, = CHS=3D1986/16/63

Partition check:

 /dev/ide/host0/bus0/target0/lun0: p1

 

 

 

Linux = 2.6.16.25 Output:

 

Uniform = Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: = Assuming 50MHz system bus speed for PIO modes; override with = idebus=3Dxx

ide-floppy driver 0.99.newide

SWARM = IDE driver

ide-swarm: IDE interface at GenBus slot 4

NET: = Registered protocol family 2

 

 

Thank = you for your time.

 

Gary

--

Gary A. Smith, ABD PhD
Systems Engineer, 3Phoenix, Inc.

------=_NextPart_000_0007_01C6ABE7.85148F30--