From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <000701c5cffd$f4e8cc20$6701a8c0@mainframe> From: "Jonathan Leong" To: References: <001901c5cfe1$29a64180$6701a8c0@mainframe> <1129201609.6951.1.camel@localhost.localdomain> <000401c5cff4$d138d620$6701a8c0@mainframe> <1129210251.6308.0.camel@localhost.localdomain> Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 13 Oct 2005 21:56:43 +0800 Hi Marcel, It should be the BPA-100. According to your website, I reckon it belongs to the first generation (08fd:0001) . The device isnt marked Tektronix but Digianswer A/S Bluetooth Protocol Analyzer but shouldn't be much of a difference. The loaded driver is hci_usb instead of bpa10x, maybe the driver was missing? modprobe bpa10x.ko gave me an error. Regards, Jonathan Leong ----- Original Message ----- From: "Marcel Holtmann" To: Sent: Thursday, October 13, 2005 9:30 PM Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer > Hi Jonathan, > >> > show me the content of /proc/bus/usb/devices and check if you have the >> > bpa10x kernel driver. If not then you might need to install a newer >> > kernel. >> >> here we go, >> >> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 >> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1 >> P: Vendor=08fd ProdID=0001 Rev= 1.00 >> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA >> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb >> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms >> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms >> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms >> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms >> >> Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch. >> I'll post the results in a bit. > > this won't help, I think. Is this the BPA-100 or the BPA-105? > > Regards > > Marcel > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users