From: "Ricardo Chamorro" <ricardo.a.chamorro@gmail.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Several basic doubts
Date: Tue, 12 Jul 2005 01:38:56 +0000 [thread overview]
Message-ID: <000801c58682$899e4a90$026fa8c0@ricardo> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1005 bytes --]
I have a connection cablemodem (down 1024kbit up 256 kbit) that spreads Internet to a LAN of 4 PC. Router-firewall is one 486 DX4 100 96 MB RAM that runs a Debian Sarge (kernel 2,4,25), that does NOT serve nor squid, nor samba, nor smtp, etc.... single do routing-firewalling.
I am something confused by opinions and "presumed" manual and howto that I have read and have confused I more... Then I ask to them you:
I must do shaping with the NIC that connect with ISP (etho)... or with the NIC of the LAN (eth1)????... Because I have seen opinions on both possibilities, but I have tested the two and second did not give me good results. In the case of using the NIC to Internet (eth0) I must set like CEIL the bandwidth of downstream (1024kbit) or upstream (256kbit)????... And in such case I must set the 75 percent approximately of the bandwidth to avoid to saturate the band?
Another question is if it agrees -upon my case- using priorities for the classes...
Thanks in advance
Ricardo
[-- Attachment #1.2: Type: text/html, Size: 1621 bytes --]
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next reply other threads:[~2005-07-12 1:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-12 1:38 Ricardo Chamorro [this message]
2005-07-12 2:36 ` [LARTC] Several basic doubts Jody Shumaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000801c58682$899e4a90$026fa8c0@ricardo' \
--to=ricardo.a.chamorro@gmail.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.