From: "Thomas Goerke" <tom@goeng.com.au>
To: stev391@email.com, "'jackden'" <jackden@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Compro VideoMate E650 hybrid PCIe DVB-T and analog TV/FM capture card
Date: Sat, 30 Aug 2008 11:35:23 +0800 [thread overview]
Message-ID: <000901c90a51$72e44100$58acc300$@com.au> (raw)
In-Reply-To: <20080830012407.BCB0247808F@ws1-5.us4.outblaze.com>
> Tom,
> (Jackden please try first patch and provide feedback, if that doesn't
> work for your card, then try this and provide feedback)
>
> The second dmesg (with debugging) didn't show me what I was looking
> for, but from past experience I will try something else. I was looking
> for some dma errors from the cx23885 driver, these usually occured
> while streaming is being attempted.
>
> Attached to this email is another patch. The difference between the
> first one and the second one is that I load an extra module (cx25840),
> which normally is not required for DVB as it is part of the analog side
> of this card. This does NOT mean analog will be supported.
>
> As of today the main v4l-dvb can be used with this patch and this means
> that the cx23885-leadtek tree will soon disappear. So step 2 above has
> been modified to: "Check out the latest v4l-dvb source".
>
> Other then that step 4 has a different file name for the patch.
>
> Steps that need to be completed are: 2, 3, 4, 5, 7, 9, 10 & 11. (As you
> have completed the missing steps already).
>
> If the patch works, please do not stop communicating, as I have to
> perform one more patch to prove that cx25840 is required and my
> assumptions are correct. Once this is completed I will send it to
> Steven Toth for inclusion in his test tree. This will need to be tested
> by you again, and if all is working well after a week or more it will
> be included into the main tree.
>
> Regards,
> Stephen
>
>
> --
> Nothing says Labor Day like 500hp of American muscle Visit OnCars.com
> today.
Stephen,
I downloaded latest version of v4l-dvb (30/08/08:11:30am WST), applied patch
(which passed) and then tried a make. This is the output:
-- snip --
include/asm/io_32.h: In function 'memcpy_fromio':
include/asm/io_32.h:211: warning: passing argument 2 of '__memcpy' discards
qualifiers from pointer target type
CC [M] /home/tom/source/v4l-dvb/v4l/stradis.o
CC [M] /home/tom/source/v4l-dvb/v4l/cpia.o
/home/tom/source/v4l-dvb/v4l/cpia.c: In function 'cpia_open':
/home/tom/source/v4l-dvb/v4l/cpia.c:3205: error: implicit declaration of
function 'current_uid'
make[3]: *** [/home/tom/source/v4l-dvb/v4l/cpia.o] Error 1
make[2]: *** [_module_/home/tom/source/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/tom/source/v4l-dvb/v4l'
make: *** [all] Error 2
I then tried make clean, make and the same error occurred.
Tom
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-08-30 3:35 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-30 1:24 [linux-dvb] Compro VideoMate E650 hybrid PCIe DVB-T and analog TV/FM capture card stev391
2008-08-30 3:35 ` Thomas Goerke [this message]
2008-08-30 4:03 ` Thomas Goerke
2008-08-30 14:30 ` Steven Toth
2008-08-31 5:29 ` jackden
2008-08-31 11:22 ` Thomas Goerke
2008-08-31 22:10 ` Steven Toth
-- strict thread matches above, loose matches on Subject: below --
2008-09-07 1:44 stev391
2008-09-07 1:24 stev391
2008-09-07 0:29 stev391
2008-09-07 1:06 ` Thomas Goerke
2008-09-05 22:13 stev391
2008-09-06 4:56 ` Thomas Goerke
2008-09-04 23:26 stev391
2008-09-05 4:17 ` Thomas Goerke
2008-09-05 4:40 ` Thomas Goerke
2008-09-05 13:23 ` Steven Toth
2008-09-01 0:12 stev391
2008-09-02 16:15 ` Steven Toth
2008-08-30 22:08 stev391
2008-08-28 11:26 stev391
2008-08-28 15:12 ` Thomas Goerke
2008-08-27 6:13 stev391
2008-08-27 10:11 ` Thomas Goerke
2008-08-27 14:07 ` Steven Toth
2008-08-28 0:40 ` Thomas Goerke
2008-08-26 6:50 stev391
2008-08-26 13:40 ` Thomas Goerke
2008-08-25 22:03 stev391
2008-08-26 5:48 ` Thomas Goerke
2008-08-26 13:22 ` jackden
2008-08-24 2:14 stev391
2008-08-22 10:05 jackden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000901c90a51$72e44100$58acc300$@com.au' \
--to=tom@goeng.com.au \
--cc=jackden@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=stev391@email.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.