diff for duplicates of <000b01c89eb5$2af81630$070514ac@atmel.com> diff --git a/a/1.txt b/N1/1.txt index fa841ff..9ee7c75 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,33 +1,43 @@ > [cross posting from one mailing list to another] -> +>=20 >>> is the file zImage.elf my proper network image ? >> >> What bootloader is on your board? zImage.elf *might* be the proper >> image. If you're using u-boot, then you want to build a uImage >> instead. -> +>=20 > I'm trying to compile u-boot with buildroot, but it fails with: -> -> /usr/bin/make -j1 -C -> /home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2 +>=20 +> /usr/bin/make -j1 -C=20 +> = +/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/= +genepy/u-boot-1.3.2=20 > \ > ""_config -> make[1]: Entering directory -> `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2' +> make[1]: Entering directory=20 +> = +`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc= +/genepy/u-boot-1.3.2' > make[1]: *** No rule to make target `_config'. Stop. -> make[1]: Leaving directory -> `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2' -> make: *** -> [/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2/.configured] +> make[1]: Leaving directory=20 +> = +`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc= +/genepy/u-boot-1.3.2' +> make: ***=20 +> = +[/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc= +/genepy/u-boot-1.3.2/.configured]=20 > Error 2 -> -> Apparently it expects a BOARD_NAME variable, but I don't know what to put in -> it (I looked at the makefile and can't find the ml405 referenced in there). -> -- +>=20 +> Apparently it expects a BOARD_NAME variable, but I don't know what to = +put in=20 +> it (I looked at the makefile and can't find the ml405 referenced in = +there). +> --=20 > Guillaume Dargaud > http://www.gdargaud.net/ -> +>=20 I think you need to figure out how to build u-boot for your board diff --git a/a/content_digest b/N1/content_digest index 4da1fda..de7a5ec 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,41 +2,54 @@ "ref\0fa686aa40804110655x48120e84tde01a52d8bb39a3@mail.gmail.com\0" "ref\001e801c89e49$6d0e6400$ad289e86@LPSC0173W\0" "From\0Ulf Samuelsson <ulf.samuelsson@atmel.com>\0" - "Subject\0[Buildroot] zImage.embedded\0" + "Subject\0Re: [Buildroot] zImage.embedded\0" "Date\0Mon, 14 Apr 2008 22:55:03 +0200\0" - "To\0buildroot@busybox.net\0" + "To\0Guillaume Dargaud <dargaud@lpsc.in2p3.fr>" + <linuxppc-dev@ozlabs.org> + Buildroot Mailinglist + " <buildroot@uclibc.org>\0" "\00:1\0" "b\0" "\n" "> [cross posting from one mailing list to another]\n" - "> \n" + ">=20\n" ">>> is the file zImage.elf my proper network image ?\n" ">>\n" ">> What bootloader is on your board? zImage.elf *might* be the proper\n" ">> image. If you're using u-boot, then you want to build a uImage\n" ">> instead.\n" - "> \n" + ">=20\n" "> I'm trying to compile u-boot with buildroot, but it fails with:\n" - "> \n" - "> /usr/bin/make -j1 -C \n" - "> /home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2 \n" + ">=20\n" + "> /usr/bin/make -j1 -C=20\n" + "> =\n" + "/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/=\n" + "genepy/u-boot-1.3.2=20\n" "> \\\n" "> \"\"_config\n" - "> make[1]: Entering directory \n" - "> `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2'\n" + "> make[1]: Entering directory=20\n" + "> =\n" + "`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=\n" + "/genepy/u-boot-1.3.2'\n" "> make[1]: *** No rule to make target `_config'. Stop.\n" - "> make[1]: Leaving directory \n" - "> `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2'\n" - "> make: *** \n" - "> [/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2/.configured] \n" + "> make[1]: Leaving directory=20\n" + "> =\n" + "`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=\n" + "/genepy/u-boot-1.3.2'\n" + "> make: ***=20\n" + "> =\n" + "[/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=\n" + "/genepy/u-boot-1.3.2/.configured]=20\n" "> Error 2\n" - "> \n" - "> Apparently it expects a BOARD_NAME variable, but I don't know what to put in \n" - "> it (I looked at the makefile and can't find the ml405 referenced in there).\n" - "> -- \n" + ">=20\n" + "> Apparently it expects a BOARD_NAME variable, but I don't know what to =\n" + "put in=20\n" + "> it (I looked at the makefile and can't find the ml405 referenced in =\n" + "there).\n" + "> --=20\n" "> Guillaume Dargaud\n" "> http://www.gdargaud.net/\n" - "> \n" + ">=20\n" "\n" "\n" "I think you need to figure out how to build u-boot for your board\n" @@ -46,4 +59,4 @@ "Best Regards\n" Ulf Samuelsson -676913f4412d179097c2bca832eeeb13a1f42b98e7db094ca0b0e05b4196f625 +3b26389cb01e222bb5215f53df36b412cdd629ea4105340ea28cc573891ca291
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.