From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Roy" Date: Wed, 07 Apr 2004 22:58:45 +0000 Subject: Re: [LARTC] Selectively filtering traffic in/out to common threshold Message-Id: <000c01c41cf3$e1ef3f00$030aa8c0@t> List-Id: References: <1081345124.9021.70.camel@al.xms.co.za> In-Reply-To: <1081345124.9021.70.camel@al.xms.co.za> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org First WRITE IN PLAIN TEXT now your problem: This can be done easily with my imq version, http://pupa.da.ru/imq seems there is no other way I was trying to use policers but this worked realy bad. ----------------------------------- Question: I have a number of users, who need to be shaped at different rates. My question is this: Is there a way that I can shape both *inbound* and *outbound* traffic to not exceed a single threshold, ie. they can get x kbps traffic in or x kbps out, but no more than x kbps in/out combined? Best Regards, -AL. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/