RE: Uboot and ML410

["John Hahn" <jhahn@bcfsemi.com>]

This thread really belongs in the u-boot mailing list, I will respond there:

U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Cheers

John

> -----Original Message-----
> From: linuxppc-embedded-bounces+jhahn=bcfsemi.com@ozlabs.org
> [mailto:linuxppc-embedded-bounces+jhahn=bcfsemi.com@ozlabs.org] On
> Behalf Of khollan
> Sent: Thursday, December 06, 2007 11:01 AM
> To: linuxppc-embedded@ozlabs.org
> Subject: RE: Uboot and ML410
> 
> 
> 
> 
> John Hahn wrote:
> >
> > We are also using 3.81 make (Centos 5 distro) with ELDK 4.1 version
> > downloaded from www.denx.de and have had no problems using the
> > u-boot.zip srcs from www.xilinx.com/ml410_p, though we use uboot for
> > our ml403 based development, we can build u-boot for ml403_config as
> well as ml410_config.
> >
> >
> > Cheers
> >
> > John
> >
> 
> When I try compiling with my tools I get the message  No rule to make
> target `hello_world.srec', needed by `all'
> Any way to work around this.  I have compiled everything else I use on
> my system with these tools and it works fine.  I did some research on
> this problem and it seemed to be a problem with the newer versions of
> make, but if thats not the case what is the problem?  I don't really
> want to install ELDK to keep things consistent.
> Thanks
> Kevin
> --
> View this message in context: http://www.nabble.com/Uboot-and-ML410-
> tf4951335.html#a14198812
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded