From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Atechsystem" Subject: Re: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 20:05:14 +0100 Message-ID: <000c01ccea82$6be35390$43a9fab0$@freenet.de> References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00af01ccea7f$62da4680$288ed380$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mout0.freenet.de (mout0.freenet.de [195.4.92.90]) by gabe.freedesktop.org (Postfix) with ESMTP id BC9FE9E730 for ; Mon, 13 Feb 2012 11:08:04 -0800 (PST) In-Reply-To: Content-Language: de List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: 'Paulo Zanoni' Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org > Von: Paulo Zanoni [mailto:przanoni@gmail.com] >Maybe the best tree to test is this: >http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queu= ed I will compile it now. Before I used the drm-intel-next branch. I downloaded the latest tar.gz file and didn't use git to checkout the branch. >Rodrigo Vivi [mailto:rodrigo.vivi@gmail.com] >The git repo is right, but are you sure you are using the remotes/origin/interlaced branch? >It is strange that you couldn't see any interlace mode without using the handmade modeline. = No chance to select it directly. I 've no clue to select it by standard lxde dialog. -----Urspr=FCngliche Nachricht----- Von: Paulo Zanoni [mailto:przanoni@gmail.com] = Gesendet: Montag, 13. Februar 2012 19:56 An: Atechsystem Cc: Intel Graphics Development Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes 2012/2/13 Atechsystem : > I compiled it from here: git://people.freedesktop.org/~danvet/drm Did you change to the "interlaced" branch? Maybe the best tree to test is this: http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queued (repository is drm-intel and branch is drm-intel-next-queued). > I added for example: > Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 10= 84 = > 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, = > 30Hz, 25Hz and 24Hz. This should not be needed. If you have the correct branch, you don't need any configuration tweak: just boot the machine, plug a monitor that supports interlaced modes, and "xrandr --verbose" will show you some interlaced modes. Please confirm that you are using the correct branch first. Use "git log" or "git branch" commands to check. -- Paulo Zanoni