From: "Raptorfan" <raptorfan@earthlink.net>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>, <linux-kernel@vger.kernel.org>
Subject: Re: aic7xxx driver failing (2.4.19-ac4)
Date: Tue, 19 Nov 2002 20:45:46 -0500 [thread overview]
Message-ID: <000e01c29036$8bdc2790$420aa8c0@beast> (raw)
In-Reply-To: 1604970000.1037732321@aslan.btc.adaptec.com
[-- Attachment #1: Type: text/plain, Size: 1475 bytes --]
From: "Justin T. Gibbs" <gibbs@scsiguy.com>
> Can you try to update your system with the driver version here:
> http://people.freebsd.org/~gibbs/linux/tarballs/aic79xx-linux-2.4.tar.gz
> The files are for the latest linux-2.4 tree, but should be easily
> modified to work with the kernel you are using.
A slight improvement: the kernel no longer oopses but still never completely
makes it thru boot.
I've attached the dmesg from the box at boot with the drivers compiled
in-kernel. The card appears to be detected, it appears to go through the IDs
and does find my devices but hangs after the last message. If I build the
driver as a module, the insmod hangs loading the module. Switching to
another terminal and viewing dmesg output show a similar message as
attached, except in this order:
- detection of the card ("scsi0: Adaptec AIC7XXX" etc etc)
- detection of the devices ("host 0 channel 0 id 2 lun 0\n Vendor:HP" etc
etc)
- ONE instance of the failed detection message
I waited for ~ 5 minutes before deciding the detection was dead and
rebooted. insmod was the still hung and a 'lsmod' showed the aic7xxx driver
stuck as '(initializing).'
.. but at least there's no more oops. :)
Also, I find it interesting my dat drive is discovered as ID2.. when it's
ID3. This is confirmed by visual check, the adaptec card's boot detection
and $OTHER_OS using the drive. The Zipdrive is at ID6 (and appears to be
detected correctly.
-r
ps.. thanks for the help so far.
[-- Attachment #2: dmesg2.txt --]
[-- Type: text/plain, Size: 21063 bytes --]
Linux version 2.4.19-ac4 (root@otus) (gcc version 2.95.3 20010315 (release)) #40 Tue Nov 19 16:08:28 EST 2002
\rBIOS-provided physical RAM map:
\r BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
\r BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
\r BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
\r BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
\r BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
\r BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
\r BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
\r511MB LOWMEM available.
\rOn node 0 totalpages: 131056
\rzone(0): 4096 pages.
\rzone(1): 126960 pages.
\rzone(2): 0 pages.
\rKernel command line: BOOT_IMAGE=Linux-Serial ro root=303 hdd=ide-scsi console=ttyS0,38400 console=tty0
\ride_setup: hdd=ide-scsi
\rLocal APIC disabled by BIOS -- reenabling.
\rFound and enabled local APIC!
\rInitializing CPU#0
\rDetected 798.111 MHz processor.
\rConsole: colour VGA+ 80x50
\rCalibrating delay loop... 1592.52 BogoMIPS
\rMemory: 515328k/524224k available (1017k kernel code, 8508k reserved, 467k data, 88k init, 0k highmem)
\rDentry cache hash table entries: 65536 (order: 7, 524288 bytes)
\rInode cache hash table entries: 32768 (order: 6, 262144 bytes)
\rMount cache hash table entries: 512 (order: 0, 4096 bytes)
\rBuffer cache hash table entries: 32768 (order: 5, 131072 bytes)
\rPage-cache hash table entries: 131072 (order: 7, 524288 bytes)
\rCPU: L1 I cache: 16K, L1 D cache: 16K
\rCPU: L2 cache: 256K
\rIntel machine check architecture supported.
\rIntel machine check reporting enabled on CPU#0.
\rCPU: Intel Pentium III (Coppermine) stepping 06
\rEnabling fast FPU save and restore... done.
\rEnabling unmasked SIMD FPU exception support... done.
\rChecking 'hlt' instruction... OK.
\rPOSIX conformance testing by UNIFIX
\renabled ExtINT on CPU#0
\rESR value before enabling vector: 00000000
\rESR value after enabling vector: 00000000
\rUsing local APIC timer interrupts.
\rcalibrating APIC timer ...
\r..... CPU clock speed is 797.9774 MHz.
\r..... host bus clock speed is 132.9961 MHz.
\rcpu: 0, clocks: 1329961, slice: 664980
\rCPU0<T0:1329952,T1:664960,D:12,S:664980,C:1329961>
\rmtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
\rmtrr: detected mtrr type: Intel
\rPCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
\rPCI: Using configuration type 1
\rPCI: Probing PCI hardware
\rPCI: Using IRQ router VIA [1106/0686] at 00:07.0
\rPCI: Disabling Via external APIC routing
\rLinux NET4.0 for Linux 2.4
\rBased upon Swansea University Computer Society NET3.039
\rInitializing RT netlink socket
\rStarting kswapd
\rpty: 512 Unix98 ptys configured
\rSerial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
\rttyS00 at 0x03f8 (irq = 4) is a 16550A
\rttyS01 at 0x02f8 (irq = 3) is a 16550A
\rblock: 992 slots per queue, batch=248
\rUniform Multi-Platform E-IDE driver Revision: 6.31
\ride: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
\rVP_IDE: IDE controller on PCI bus 00 dev 39
\rVP_IDE: chipset revision 16
\rVP_IDE: not 100% native mode: will probe irqs later
\rVP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
\r ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
\r ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
\rAEC6880R: IDE controller on PCI bus 00 dev 68
\rPCI: Found IRQ 7 for device 00:0d.0
\rAEC6880R: chipset revision 2
\rAEC6880R: not 100% native mode: will probe irqs later
\rAEC6880R: ROM enabled at 0xdffc0000
\r ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio
\r ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:pio, hdh:pio
\rhda: Maxtor 52049H3, ATA DISK drive
\rhdb: WDC AC313000R, ATA DISK drive
\rhdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
\rhdd: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
\rhdf: MAXTOR 6L060J3, ATA DISK drive
\ride0 at 0x1f0-0x1f7,0x3f6 on irq 14
\ride1 at 0x170-0x177,0x376 on irq 15
\ride2 at 0xc800-0xc807,0xc402 on irq 7
\rhda: host protected area => 1
\rhda: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(66)
\rhdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: host protected area => 1
hdb: 25429824 sectors (13020 MB) w/512KiB Cache, CHS=1582/255/63, (U)DMA
hdf: host protected area => 1
hdf: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=116336/16/63, UDMA(133)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2
hdf: hdf1 hdf2 hdf3 hdf4 < hdf5 hdf6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 9 for device 00:0c.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.21
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
scsi0:0:1:0: Attempting to queue an ABORT message
scsi0: Dumping Card State while idle, at SEQADDR 0x18
ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x2
SCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
SBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
SXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
STACK:
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x40] SCB_SCSIID[0x17] SCB_LUN[0x0]
Kernel Free SCB list: 1 0
Untagged Q(1): 2
DevQ(0:1:0): 0 waiting
DevQ(0:3:0): 0 waiting
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue a TARGET RESET message
scsi0:0:1:0: Is not an active device
aic7xxx_dev_reset returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
scsi0: Dumping Card State while idle, at SEQADDR 0x18
ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x2
SCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
SBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
SXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
STACK:
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
\rSequencer SCB Info:
\r 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 2 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
\r 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\rPending list:
\r 3 SCB_CONTROL[0x50] SCB_SCSIID[0x17] SCB_LUN[0x0]
\rKernel Free SCB list: 1 0
\rUntagged Q(1): 3
\rDevQ(0:1:0): 0 waiting
\rDevQ(0:3:0): 0 waiting
\rscsi0:0:1:0: Cmd aborted from QINFIFO
\raic7xxx_abort returns 0x2002
\rscsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 1 lun 0
\rscsi0:0:2:0: Attempting to queue an ABORT message
\rscsi0: Dumping Card State while idle, at SEQADDR 0x18
\rACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
\rHCNT = 0x0 SCBPTR = 0x2
\rSCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
\rSBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
\rSSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
\rSXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
\rSTACK:
\rSCB count = 4
\rKernel NEXTQSCB = 3
\rCard NEXTQSCB = 2
\rQINFIFO entries: 2
\rWaiting Queue entries:
\rDisconnected Queue entries:
\rQOUTFIFO entries:
\rSequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
\rSequencer SCB Info:
\r 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 2 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
\r 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\rPending list:
\r 2 SCB_CONTROL[0x40] SCB_SCSIID[0x27] SCB_LUN[0x0]
\rKernel Free SCB list: 1 0
\rUntagged Q(2): 2
\rDevQ(0:2:0): 0 waiting
\rDevQ(0:3:0): 0 waiting
\rscsi0:0:2:0: Cmd aborted from QINFIFO
\raic7xxx_abort returns 0x2002
\rscsi0:0:2:0: Attempting to queue a TARGET RESET message
\rscsi0:0:2:0: Is not an active device
\raic7xxx_dev_reset returns 0x2002
\rscsi0:0:2:0: Attempting to queue an ABORT message
\rscsi0: Dumping Card State while idle, at SEQADDR 0x18
\rACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
\rHCNT = 0x0 SCBPTR = 0x2
\rSCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
\rSBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
\rSSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
\rSXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
\rSTACK:
\rSCB count = 4
\rKernel NEXTQSCB = 2
\rCard NEXTQSCB = 3
\rQINFIFO entries: 3
\rWaiting Queue entries:
\rDisconnected Queue entries:
\rQOUTFIFO entries:
\rSequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
\rSequencer SCB Info:
\r 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff]
\r 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\rPending list:
\r 3 SCB_CONTROL[0x50] SCB_SCSIID[0x27] SCB_LUN[0x0]
\rKernel Free SCB list: 1 0
\rUntagged Q(2): 3
\rDevQ(0:2:0): 0 waiting
\rDevQ(0:3:0): 0 waiting
\rscsi0:0:2:0: Cmd aborted from QINFIFO
\raic7xxx_abort returns 0x2002
\rscsi0:0:2:0: Attempting to queue an ABORT message
\rscsi0: Dumping Card State while idle, at SEQADDR 0x18
\rACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
\rHCNT = 0x0 SCBPTR = 0x2
\rSCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
\rSBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
\rSSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
\rSXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
\rSTACK:
\rSCB count = 4
\rKernel NEXTQSCB = 2
\rCard NEXTQSCB = 3
\rQINFIFO entries: 3
\rWaiting Queue entries:
\rDisconnected Queue entries:
\rQOUTFIFO entries:
\rSequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
\rSequencer SCB Info:
\r 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff]
\r 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\rPending list:
\r 3 SCB_CONTROL[0x50] SCB_SCSIID[0x27] SCB_LUN[0x0]
\rKernel Free SCB list: 1 0
\rUntagged Q(2): 3
\rDevQ(0:2:0): 0 waiting
\rDevQ(0:3:0): 0 waiting
\rscsi0:0:2:0: Cmd aborted from QINFIFO
\raic7xxx_abort returns 0x2002
\rscsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 2 lun 0
\r Vendor: HP Model: C1533A Rev: 9608
\r Type: Sequential-Access ANSI SCSI revision: 02
\rscsi0:0:6:0: Attempting to queue an ABORT message
\rscsi0: Dumping Card State while idle, at SEQADDR 0x18
\rACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
\rHCNT = 0x0 SCBPTR = 0x2
\rSCSIPHASE[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12]
\rSBLKCTL[0x2] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0]
\rSSTAT1[0x2] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]
\rSXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d]
\rSTACK:
\rSCB count = 4
\rKernel NEXTQSCB = 3
\rCard NEXTQSCB = 2
\rQINFIFO entries: 2
\rWaiting Queue entries:
\rDisconnected Queue entries:
\rQOUTFIFO entries:
\rSequencer Free SCB List: 2 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
\rSequencer SCB Info:
\r 0 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 2 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0] SCB_TAG[0xff]
\r 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\r 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
\rPending list:
\r 2 SCB_CONTROL[0x40] SCB_SCSIID[0x67] SCB_LUN[0x0]
\rKernel Free SCB list: 1 0
\rUntagged Q(6): 2
\rDevQ(0:3:0): 0 waiting
\rDevQ(0:6:0): 0 waiting
\rscsi0:0:6:0: Cmd aborted from QINFIFO
\raic7xxx_abort returns 0x2002
\r(scsi0:A:6:0): refuses WIDE negotiation. Using 8bit transfers
\r(scsi0:A:6:0): refuses synchronous negotiation. Using asynchronous transfers
\r Vendor: IOMEGA Model: ZIP 250 R
next prev parent reply other threads:[~2002-11-20 1:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-19 18:20 aic7xxx driver failing (2.4.19-ac4) Raptorfan
2002-11-19 18:58 ` Justin T. Gibbs
2002-11-20 1:45 ` Raptorfan [this message]
2002-11-20 2:32 ` Justin T. Gibbs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000e01c29036$8bdc2790$420aa8c0@beast' \
--to=raptorfan@earthlink.net \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.