From: "Sean Liming" <sean_liming@sjjmicro.com>
To: <yocto@yoctoproject.org>
Subject: Build Error
Date: Sun, 5 Feb 2012 14:27:23 -0800 [thread overview]
Message-ID: <000e01cce455$55a1c540$00e54fc0$@sjjmicro.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1964 bytes --]
I am new developer to Yocto and embedded Linux in general
Host machine: i3 with 4GB RAM
OS: Ubuntu 11.10 64-bit
I am following the online quick start guide, and looks like the end of
bitbake runs into several errors:
ERROR: Task 1136
(/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb,
do_configure) failed with exit code '1'
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-nam
ing-utils-native_0.8.7.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_
2.1.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb'
failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb'
failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb'
failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb'
failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_
0.5.bb' failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb'
failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb'
failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb'
failed
Looking back at the build process, one error calls out a package that cannot
be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz
I have attached errors some of the log files. The common error appears to be
oe_runconf failed.
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is
supposed to be using:
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in
the message popup says what is the shell.
Thanks for any help.
Regards,
Sean
[-- Attachment #1.2: Type: text/html, Size: 4842 bytes --]
[-- Attachment #2: log.do_configure.1901 --]
[-- Type: application/octet-stream, Size: 12247 bytes --]
DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
automake (GNU automake) 1.11.1
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Tom Tromey <tromey@redhat.com>
and Alexandre Duret-Lutz <adl@gnu.org>.
AUTOV is 1.11
NOTE: Executing glib-gettextize --force --copy
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
NOTE: Executing intltoolize --copy --force --automake
NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ -I/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ --force --warnings=cross
aclocal: unknown warning category `cross'
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
aclocal: unknown warning category `cross'
autoreconf: running: /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ --include=/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ --force --warnings=cross
autoreconf: running: /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/autoheader --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ --include=/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/aclocal-copy/ --force --warnings=cross
autoreconf: running: automake --foreign --add-missing --copy --force-missing --warnings=cross
automake: unknown warning category `cross'
autoreconf: running: gnu-configize
autoreconf: Leaving directory `.'
NOTE: Running /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/libfm-0.1.14/configure --build=x86_64-linux --host=i586-poky-linux --target=i586-poky-linux --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/libexec --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/usr/share/info --mandir=/usr/share/man --disable-silent-rules --with-libtool-sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 ...
configure: WARNING: unrecognized options: --disable-silent-rules
configure: loading site script /home/sean/poky-edison-6.0/meta/site/endian-little
configure: loading site script /home/sean/poky-edison-6.0/meta/site/ix86-common
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common-linux
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common-glibc
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/ncurses_config
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/eglibc_config
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/zlib_config
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for i586-poky-linux-strip... i586-poky-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i586-poky-linux-gcc... i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 accepts -g... yes
checking for i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... i586-poky-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86... i586-poky-linux-ld --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86
checking if the linker (i586-poky-linux-ld --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... i586-poky-linux-nm
checking the name lister (i586-poky-linux-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-pc-linux-gnu file names to i586-poky-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for i586-poky-linux-ld --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 option to reload object files... -r
checking for i586-poky-linux-objdump... i586-poky-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for i586-poky-linux-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for i586-poky-linux-ar... i586-poky-linux-ar
checking for archiver @FILE support... @
checking for i586-poky-linux-strip... (cached) i586-poky-linux-strip
checking for i586-poky-linux-ranlib... i586-poky-linux-ranlib
checking command to parse i586-poky-linux-nm output from i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 object... ok
checking for sysroot... /home/sean/edison-6.0-build/tmp/sysroots/qemux86
checking for i586-poky-linux-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking how to run the C preprocessor... i586-poky-linux-gcc -E --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 -m32 -march=i586
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for dlfcn.h... (cached) yes
checking for objdir... .libs
checking if i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 supports -fno-rtti -fno-exceptions... no
checking for i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 option to produce PIC... -fPIC -DPIC
checking if i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 PIC flag -fPIC -DPIC works... yes
checking if i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 static flag -static works... yes
checking if i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 supports -c -o file.o... yes
checking if i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 supports -c -o file.o... (cached) yes
checking whether the i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 linker (i586-poky-linux-ld --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ANSI C header files... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for pow in -lm... yes
checking whether NLS is requested... yes
checking for intltool >= 0.40.0... 0.40.6 found
checking for intltool-update... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-update
checking for intltool-merge... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-merge
checking for intltool-extract... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-extract
checking for xgettext... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/xgettext
checking for msgmerge... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgmerge
checking for msgfmt... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgfmt
checking for gmsgfmt... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
ERROR: Function 'do_configure' failed (see /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/libfm-0.1.14-r3/temp/log.do_configure.1901 for further information)
[-- Attachment #3: log.do_configure.1926 --]
[-- Type: application/octet-stream, Size: 7174 bytes --]
DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
automake (GNU automake) 1.11.1
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Tom Tromey <tromey@redhat.com>
and Alexandre Duret-Lutz <adl@gnu.org>.
AUTOV is 1.11
NOTE: Executing glib-gettextize --force --copy
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
NOTE: Executing intltoolize --copy --force --automake
NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ -I/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ -I /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ --force --warnings=cross
aclocal: unknown warning category `cross'
autoreconf: configure.in: tracing
autoreconf: configure.in: not using Libtool
autoreconf: running: /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ --include=/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 --include=/home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/aclocal-copy/ --force --warnings=cross
autoreconf: configure.in: not using Autoheader
autoreconf: running: automake --foreign --add-missing --copy --force-missing --warnings=cross
automake: unknown warning category `cross'
autoreconf: running: gnu-configize
autoreconf: Leaving directory `.'
NOTE: Running /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/xkeyboard-config-2.1/configure --build=x86_64-linux --host=i586-poky-linux --target=i586-poky-linux --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/libexec --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/usr/share/info --mandir=/usr/share/man --disable-silent-rules --with-libtool-sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 --with-xkb-rules-symlink=xorg ...
configure: WARNING: unrecognized options: --disable-silent-rules, --with-libtool-sysroot
configure: loading site script /home/sean/poky-edison-6.0/meta/site/endian-little
configure: loading site script /home/sean/poky-edison-6.0/meta/site/ix86-common
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common-linux
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common-glibc
configure: loading site script /home/sean/poky-edison-6.0/meta/site/common
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/ncurses_config
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/eglibc_config
configure: loading site script /home/sean/edison-6.0-build/tmp/sysroots/qemux86/usr/share/i586-poky-linux_config_site.d/zlib_config
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for i586-poky-linux-strip... i586-poky-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for xkbcomp... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/xkbcomp
checking whether NLS is requested... yes
checking for style of include used by make... GNU
checking for i586-poky-linux-gcc... i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 accepts -g... yes
checking for i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86 option to accept ISO C89... none needed
checking dependency style of i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/sean/edison-6.0-build/tmp/sysroots/qemux86... none
checking for intltool >= 0.30... 0.40.6 found
checking for intltool-update... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-update
checking for intltool-merge... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-merge
checking for intltool-extract... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/intltool-extract
checking for xgettext... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/xgettext
checking for msgmerge... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgmerge
checking for msgfmt... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgfmt
checking for gmsgfmt... /home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
ERROR: Function 'do_configure' failed (see /home/sean/edison-6.0-build/tmp/work/i586-poky-linux/xkeyboard-config-2.1-r1/temp/log.do_configure.1926 for further information)
[-- Attachment #4: log.do_unpack.1896 --]
[-- Type: application/octet-stream, Size: 1260 bytes --]
NOTE: Unpacking /home/sean/edison-6.0-build/downloads/icon-naming-utils-0.8.7.tar.gz to /home/sean/edison-6.0-build/tmp/work/x86_64-linux/icon-naming-utils-native-0.8.7-r3/
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
ERROR: Function 'Unpack failure for URL: 'http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz'. Unpack command PATH="/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/perl-native:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin/i586-linux:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/sbin:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/usr/bin:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux/sbin:/home/sean/edison-6.0-build/tmp/sysroots/x86_64-linux//bin:/home/sean/poky-edison-6.0/scripts/native-intercept:/home/sean/poky-edison-6.0/scripts:/home/sean/poky-edison-6.0/bitbake/bin/:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/sean/poky-edison-6.0/scripts" tar xz --no-same-owner -f /home/sean/edison-6.0-build/downloads/icon-naming-utils-0.8.7.tar.gz failed with return value 2' failed
next reply other threads:[~2012-02-05 22:27 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-05 22:27 Sean Liming [this message]
2012-02-05 23:24 ` Build Error autif khan
2012-02-05 23:26 ` autif khan
2012-02-05 23:27 ` Khem Raj
2012-02-05 23:49 ` Rudolf Streif
2012-02-05 23:55 ` Khem Raj
2012-02-06 0:00 ` Khem Raj
2012-02-06 4:01 ` Sean Liming
2012-02-06 6:29 ` Khem Raj
2012-02-06 7:04 ` Sean Liming
2012-02-06 7:20 ` Sean Liming
2012-02-06 16:44 ` Sean Liming
2012-02-06 17:31 ` autif khan
2012-02-06 1:30 ` James W.
-- strict thread matches above, loose matches on Subject: below --
2022-03-30 11:38 Build error Formasit Fokunang
2022-03-30 11:46 ` Sevinj Aghayeva
2022-03-30 12:34 ` Formasit Fokunang
2022-03-29 4:32 Build Error Formasit Fokunang
2022-03-29 5:53 ` Rebecca Mckeever
2022-03-29 7:28 ` Mike Rapoport
2019-07-28 20:08 build error Matteo Croce
2019-07-28 20:08 ` Matteo Croce
2019-07-28 20:15 ` Bernd Petrovitsch
2019-07-28 20:15 ` Bernd Petrovitsch
2019-07-28 20:28 ` Matteo Croce
2019-07-28 20:28 ` Matteo Croce
2019-07-29 4:44 ` Bhaskar Chowdhury
2019-07-29 4:44 ` Bhaskar Chowdhury
2019-07-29 7:58 ` Matteo Croce
2019-07-29 7:58 ` Matteo Croce
2019-07-29 9:50 ` Will Deacon
2019-07-29 9:50 ` Will Deacon
2019-07-29 10:08 ` Matteo Croce
2019-07-29 10:08 ` Matteo Croce
2019-07-29 10:16 ` Vincenzo Frascino
2019-07-29 10:16 ` Vincenzo Frascino
2019-07-29 10:21 ` Matteo Croce
2019-07-29 10:25 ` Matteo Croce
2019-07-29 10:25 ` Matteo Croce
2019-07-29 11:08 ` Vincenzo Frascino
2019-07-29 11:08 ` Vincenzo Frascino
2019-07-29 11:12 ` Matteo Croce
2019-07-29 11:12 ` Matteo Croce
2019-07-29 11:18 ` Vincenzo Frascino
2019-07-29 11:18 ` Vincenzo Frascino
2019-07-29 11:26 ` Matteo Croce
2019-07-29 11:26 ` Matteo Croce
[not found] <1986949339.1309580.1532416272151.ref@mail.yahoo.com>
2018-07-24 7:11 ` Build Error hardik vala
2018-07-24 8:09 ` Burton, Ross
2018-07-24 8:29 ` hardik vala
2018-07-24 8:40 ` Alexander Kanavin
2018-07-24 10:08 ` Burton, Ross
2018-07-24 12:22 ` hardik vala
2018-03-19 19:44 Rajath C S
2018-03-19 19:48 ` Derek Straka
[not found] ` <CAPGMVzHnpq7qThc2MBi63cu-xJ+GsCEmYxNdTjh6znmAN+sHTg@mail.gmail.com>
2018-03-19 20:16 ` Derek Straka
2017-01-26 5:38 Build error Amit Kumar
2017-01-26 7:01 ` Greg KH
2017-01-29 8:02 ` Amit Kumar
2017-01-29 8:18 ` Ozgur Karatas
2017-01-29 8:32 ` Amit Kumar
2014-06-18 8:38 build error Ruud den Bekker
2014-06-18 22:14 ` Alex J Lennon
2013-09-25 21:18 Build error Gary Thomas
2013-09-25 21:29 ` Eric Bénard
2013-09-25 21:36 ` Gary Thomas
2013-09-25 21:30 ` Eric Bénard
2012-02-01 6:20 Build Error James W.
2012-02-01 6:29 ` Joshua Lock
2012-02-01 10:14 ` Sathishkumar Duraisamy
2012-02-01 10:19 ` Paul Eggleton
2012-02-02 7:23 ` James W.
2012-01-25 7:50 build error Jaap de Jong
2012-01-25 7:51 ` Jaap de Jong
2012-01-25 8:07 ` Martin Jansa
2012-01-25 8:57 ` Jaap de Jong
2011-04-21 10:57 sudha@123
2010-05-28 2:54 ranjith kumar
2010-05-28 4:20 ` Américo Wang
2009-12-30 15:40 Giuseppe Falsetti
2010-01-03 2:09 ` Alexander Graf
2010-01-03 2:09 ` Alexander Graf
2010-01-05 17:08 ` Marcelo Tosatti
2010-01-05 17:08 ` Marcelo Tosatti
2009-03-30 3:25 Build error Benjamin Herrenschmidt
2009-03-30 13:51 ` Kumar Gala
2009-03-30 13:59 ` Anton Vorontsov
2009-03-30 23:18 ` Benjamin Herrenschmidt
2009-03-31 20:41 ` Segher Boessenkool
2009-03-31 20:54 ` Grant Likely
2009-03-31 20:57 ` Anton Vorontsov
2009-03-31 20:52 ` Grant Likely
2007-11-28 1:24 build error Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A026DEC64-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-11-28 8:37 ` Uri Lublin
[not found] ` <474D28B2.8000601-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-28 9:35 ` Neo Jia
[not found] ` <5d649bdb0711280135ocb94bc8wafd771fa46f8508b-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-11-28 9:55 ` Avi Kivity
2007-10-23 2:55 Build error Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A02441266-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-10-23 7:08 ` Laurent Vivier
[not found] ` <471D9E04.9020105-6ktuUTfB/bM@public.gmane.org>
2007-10-23 8:06 ` Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A02125FA5-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-10-23 8:12 ` Laurent Vivier
2007-10-23 8:39 ` Avi Kivity
2007-10-18 2:07 build error Zhao, Yunfeng
2007-10-11 3:19 Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A023647A6-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-10-11 14:20 ` Avi Kivity
[not found] ` <470E3126.9030401-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-10-11 14:31 ` Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A02125F6A-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-10-11 14:35 ` Laurent Vivier
2007-10-11 14:37 ` Avi Kivity
[not found] ` <470E3532.3010002-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-10-11 14:48 ` Zhao, Yunfeng
2007-10-02 20:12 linux-kernel
2007-10-03 0:19 ` Stephen Hemminger
2007-10-03 0:28 ` Randy Dunlap
2007-10-03 0:39 ` Stephen Hemminger
2007-10-10 10:23 ` Wilfried Klaebe
2007-07-31 2:16 Zhao, Yunfeng
[not found] ` <10EA09EFD8728347A513008B6B0DA77A01D5AEBB-wq7ZOvIWXbNpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2007-07-31 6:59 ` Avi Kivity
2006-10-03 19:15 Build error Manoj Ekbote
2006-10-03 19:28 ` mlachwani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000e01cce455$55a1c540$00e54fc0$@sjjmicro.com' \
--to=sean_liming@sjjmicro.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.