From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Wed, 22 Jan 2003 00:28:33 +0000 Subject: Re: [LARTC] HTB & tc Message-Id: <000f01c2c1ad$32995dd0$0200a8c0@monster> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Check if you have HTB support in your kernel. it must be in kernel/net/sched ----- Original Message ----- From: "Antonin Karasek" To: Sent: Thursday, July 22, 2004 6:58 PM Subject: [LARTC] HTB & tc > Hi, > I'm trying to make run a simple shaping *through HTB*. I have compiled a > new kernel 2.4.21. > > First command from > http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm > said: > # tc qdisc add dev eth0 root handle 1: htb default 12 > RTNETLINK answers: Invalid argument > > I tryed both standard tc from Debian stable and > http://luxik.cdi.cz/~devik/qos/htb/v2/tc.gz > this one... > > I tryed htb.init-v0.8.5 from SourceForge with htb-lartc.tar.gz > configuration from the same site. The script doesn't report any error, but : > skatach:~/bin# ./htb.init-v0.8.5 start > skatach:~/bin# tc filter show dev eth0 > skatach:~/bin# tc class show dev eth0 > skatach:~/bin# tc qdisc show > > As I guess, it means, that there isn't any class. It isn't, what I want :( > > Any ideas, where the problem can be? > > Many thanks. > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/