Re: linnux 2.4.19-rc1 i845e ide not detected. dma doesn't work

["Nick Evgeniev" <nick@octet.spb.ru>]

Well, anyway, 2.4.19-pre10-ac2 works for me :)

> No it has everything to do with determining if the HBA is in compatablity
> or native mode and if the device is properly enabled.
>
> On Wed, 3 Jul 2002, Dave Jones wrote:
>
> > On Mon, Jul 01, 2002 at 03:49:43PM +0400, Nick Evgeniev wrote:
> >
> >  >     Why are you so assure? It's "msi 845e Max" with LAN on-board mb
with
> >  > _latest_ BIOS installed....
> >  > Just FYI 2.4.18 was even unable to run eepro100 driver on it while
intels
> >  > e100 driver was working perfectly.
> >
> > Could this be related to the pci id clash I pointed out last week?
> > That id was for an intel IDE device iirc.
> >
> > (Recap: Two id's don't tally between 2.4/2.5)
> >
> >         Dave
> >
> > --
> > | Dave Jones.        http://www.codemonkey.org.uk
> > | SuSE Labs
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
>
> Andre Hedrick
> LAD Storage Consulting Group
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>