From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Stephan M. Ott" Date: Wed, 13 Oct 2004 21:34:46 +0000 Subject: AW: [Fwd: Re: [LARTC] ssh and cs LAG] Message-Id: <001001c4b16c$8d9baa70$3700a8c0@nathanxp> List-Id: References: <416D8C3A.3050602@wp.pl> In-Reply-To: <416D8C3A.3050602@wp.pl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Switching back to older kernel won't do much. I've had this problem much earlier when using two NICs of the same type. I couldn't figure out why, but there ARE problems is many ways when using two cards of the same type. I had problems with sharing, with routing, etc. etc. Best solution is to use different NICs... don't ask me why... I just found out that this will solve the problems... -----Urspr=FCngliche Nachricht----- Von: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] Im Auftrag von Hariett Jones Gesendet: Mittwoch, 13. Oktober 2004 22:13 An: lartc@mailman.ds9a.nl Betreff: [Fwd: Re: [LARTC] ssh and cs LAG] Got some solutions myself. LAG is caused by : NETDEV WATCHDOG eth0 timeout this is caused bacause of problems with rtl8139 network card in kernel 2.6.x Solutions : 1.add in lilo.conf : append=3D"noapic" 2.turn apic off in bios 3.if u have 2 rtl8139 cards, then exchange one with some other card type (chipset) btw. all above was found in various polish forums, but none has worked=20 for me. im switching kernel back to 2.4.22, and will report later . _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/