.config: ---------------------------------------- # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # CONFIG_SCSI_LASI=y CONFIG_SCSI_ZALON=y CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set ------------------------------------------------ boot-log: ------------------------------------------------- Firmware Version 6.1 Duplex Console IO Dependent Code (IODC) revision 1 Memory Test/Initialization Completed ------------------------------------------------------------------------------ (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State Coprocessor State Cache Size --------- -------- --------------------- ----------------- ---------- 0 160 MHz Active Functional 64 KB 1 MB ext Available memory (bytes) : 536870912 Good memory required (bytes): 536870912 Primary boot path: FWSCSI.6.0 Alternate boot path: LAN.0.0.0.0.0.0 Console path: GRAPHICS(2) Keyboard path: PS2 CPU 0 WARNING: Self tests have been disabled as a result of FASTBOOT being enabled. To enable self tests, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. ------- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ------- Main Menu: Enter command > bo lan Interact with IPL (Y, N, Q)?> n Booting... Network Station Address 080009-ef34f5 System IP Address 192.168.100.160 Server IP Address 192.168.100.100 Boot IO Dependent Code (IODC) revision 2 HARD Booted. palo ipl root@P100 Thu Nov 2 20:14:08 MET 2000 0/vmlinux 2274771 bytes @ 0x6800 0/palo-cmdline '0/vmlinux HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.100.100:/tftpboot/nfsroot console=tty sym53c8xx=verb:7,debug:0xffff' Kernel: partition 0 file /vmlinux ELF32 executable Entry 00100190 first 00100000 n 4 Segment 0 load 00100000 size 1534668 mediaptr 0x1000 Segment 1 load 00278000 size 182344 mediaptr 0x178000 Segment 2 load 002a8000 size 139132 mediaptr 0x1a5000 Segment 3 load 002cc000 size 8192 mediaptr 0x1c7000 branching to kernel entry point 0x00100190 Set default PSW W bit to 0 PDC Console Initialized The 32-bit Kernel has started... Enabled FP coprocessor Free memory starts at: 0xc02fd000 start_parisc(0x504d6c,0x504d6c,0x0,0x0) PALO command line: 'HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.100.100:/tftpboot/nfsroot console=tty sym53c8xx=verb:7,debug:0xffff' PALO initrd 0-0 model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba vers 00000008 cpuid 000001e8 CPUID vers 15 rev 8 Searching for devices in PDC firmware... processor hpa 0xfffbe000 a newer box... Found devices: 1. Phantom PseudoBC GSC+ Port (7) at 0xffc00000, versions 0x504, 0x0, 0x0, 0x0, 0x0 2. Merlin 160 Core FW-SCSI (4) at 0xfff8c000, versions 0x3d, 0x0, 0x89, 0x0, 0x80 3. Merlin L2 160 (9000/778/B160L) (0) at 0xfffbe000, versions 0x502, 0x0, 0x4, 0x0, 0x81 4. Merlin 160/ThunderHawk Memory (1) at 0xfffbf000, versions 0x67, 0x0, 0x9, 0x0, 0x0 5. Merlin 160 Core BA (11) at 0xffd00000, versions 0x3d, 0x0, 0x81, 0x0, 0x0 6. Merlin 160 Core RS-232 (10) at 0xffd05000, versions 0x3d, 0x0, 0x8c, 0x0, 0x0 7. Merlin 160 Core SCSI (10) at 0xffd06000, versions 0x3d, 0x0, 0x82, 0x0, 0x0 8. Merlin 160 Core Lan (802.3) (10) at 0xffd07000, versions 0x3d, 0x0, 0x8a, 0x0, 0x0 9. Merlin 160 Core Centronics (10) at 0xffd02000, versions 0x3d, 0x0, 0x74, 0x0, 0x0 10. Merlin 160 Core Audio (10) at 0xffd04000, versions 0x3d, 0x4, 0x7b, 0x0, 0x0 11. Merlin 160 Core PC Keyboard (10) at 0xffd08000, versions 0x3d, 0x0, 0x84, 0x0, 0x0 12. Merlin 160 Core PC Keyboard (10) at 0xffd08100, versions 0x3d, 0x0, 0x84, 0x0, 0x0 13. Merlin 160 Wax BA (11) at 0xffe00000, versions 0x41, 0x0, 0x8e, 0x0, 0x0 14. Merlin 160 Wax EISA BA (11) at 0xfc000000, versions 0x41, 0x0, 0x90, 0x0, 0x0 15. Merlin 160 Wax HIL (10) at 0xffe01000, versions 0x41, 0x0, 0x73, 0x0, 0x0 16. Merlin 160 Wax RS-232 (10) at 0xffe02000, versions 0x41, 0x0, 0x8c, 0x0, 0x0 17. Coral SGC Graphics (10) at 0xf4000000, versions 0x4, 0x0, 0x77, 0x0, 0x0 18. Gecko GSC Core Graphics (10) at 0xf8000000, versions 0x16, 0x0, 0x85, 0x0, 0x0 19. Dino PCI Bridge (13) at 0xfff80000, versions 0x680, 0x0, 0xa, 0x0, 0x0 That's a total of 19 devices. CPU(s): 1 x PA7300LC (PCX-L2) at 160.000000 MHz Linux version 2.4.0-test10 (root@P100) (gcc version 2.96 20000925 (experimental)) #15 Tue Nov 14 01:01:33 MET 2000 free_bootmem(0x301000, 0x1fcff000) initrd: 00000000-00000000 pagetable_init On node 0 totalpages: 131072 zone(0): 65536 pages. zone(1): 65536 pages. zone(2): 0 pages. Kernel command line: HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.100.100:/tftpboot/nfsroot console=tty sym53c8xx=verb:7,debug:0xffff trap_init Console: colour dummy device 80x25 register_console Calibrating delay loop... 106.50 BogoMIPS Memory: 510944k available Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) POSIX conformance testing by UNIFIX Lasi version 0 at 0xffd00000 found. Wax at 0xffe00000 found. Wax: HIL Keyboard-NMI registered. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] Found i82596 at 0xffd07000, IRQ 87 early initialization of device eth0 is deferred Initializing Lasi PS/2-keyboard port at 0xffd08000... Support for Lasi PS/2-psaux not yet available ! Found HIL at 0xffe01000, IRQ 126 No handler for interrupt 35 ! HIL: timed out, assuming no keyboard present. Warning : device (10, 0x41, 0x0, 0x73, 0x0) NOT claimed by HIL 712, 715 or similiar Dino version 2.0 (bridge mode) found at 0xfff80000 The GSCtoPCI (Dino hrev 0) bus converter found may exhibit data corruption. See Service Note Numbers: A4190A-01, A4191A-01. Systems shipped after Aug 20, 1997 will not exhibit this problem. Models affected: C180, C160, C160L, B160L, and B132L workstations. dino_bridge_init: IO_ADDR_EN hasn't been configured. kernel BUG at dino.c:646! Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 stifb.c: searching for word mode STI ROMs found potential STI ROM at f4000000 STI byte mode ROM at f4000000, ignored found potential STI ROM at f8000000 pty: 256 Unix98 ptys configured lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize eth0: 82596 at 0xffd07000, 08 00 09 EF 34 F5 IRQ 87. 82596.c $Revision: 1.14 $ Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xffd05800 (irq = 90) is a 16550A ttyS01 at iomem 0xffe02800 (irq = 121) is a 16550A Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) SCSI subsystem driver Revision: 1.00 sim700: Configuring 53c710 (SCSI-ID 7) at ffd06100, IRQ 86 scsi0: Revision 0x2 Post test1, istat 01, sstat0 00, dstat 84 sim700: WARNING IRQ probe failed, (returned 0) scsi0: Good, target data areas are dma coherent scsi0: test 1 completed ok. scsi0: sim700_intr_handle() called with no interrupt scsi0 : LASI/Simple 53c7xx Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 12x/12x xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.11 searching for word mode STI ROMs found potential STI ROM at f4000000 STI byte mode ROM at f4000000, ignored found potential STI ROM at f8000000 searching for byte mode STI ROMs found potential STI ROM at f4000000 STI byte mode ROM type 1 supports 15 monitors conforms to STI ROM spec revision 8.07 dump_sti_rom: 500 graphics id 2d08c0a709a02587 dump_sti_rom: 510 font start 000183c3 dump_sti_rom: 512 region list 00018363 dump_sti_rom: 514 init_graph 00001a63 dump_sti_rom: 516 alternate code type 0 dump_sti_rom: 518 next font 00004040 f4000000 b f8000000 b Switching from PDC console