From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Bjorn" Subject: SV: [linux-lvm] Getting 200GB ATA133 and Promise Ultra133 to work Message-ID: <001201c2bfe1$06996c20$4201a8c0@eagle> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable In-Reply-To: <1851096421.20030119165740@tnonline.net> Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Sun Jan 19 11:33:02 2003 List-Id: Content-Type: text/plain; charset="iso-8859-1" To: 'Anders Widman' Cc: linux-lvm@sistina.com Yes, I bought Promise Ultra ATA/133 controller thinking this would = support big drives. One problem is support for LBA48, which 2.4.18 didn't have. What is the difference between LVM1 and LVM2? Do I have to redo the lvm using LVM2 to get access to big disc support? Regards, //Bjorn > -----Ursprungligt meddelande----- > Fr=E5n: Anders Widman [mailto:andewid@tnonline.net] > Skickat: den 19 januari 2003 16:58 > Till: Bjorn > Kopia: linux-lvm@sistina.com > =C4mne: Re: [linux-lvm] Getting 200GB ATA133 and Promise Ultra133 to = work >=20 > > Hello! >=20 > > I have Slackware 8.1 and activated lvm on 4 200GB Maxtor ATA133 = drives. > > Only 130 GB became useable on each drive. Upgrading Linux kernel to > 2.4.20 > > and downloading LVM2 and device mapper from sestina. Doing 2.4.19 = patch > on > > 2.4.20. Still lvm thinks it is 130 GB drives. > > What is the trick to use 200GB drives? >=20 > Do you have a IDE controller that support BIG Drive Technology > (132GB+)? >=20 > > Regards, >=20 > > //Bjorn >=20 >=20 >=20 > > _______________________________________________ > > linux-lvm mailing list > > linux-lvm@sistina.com > > http://lists.sistina.com/mailman/listinfo/linux-lvm > > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/