[linux-dvb] Duel Hauppauge HVR-1600

["Tom Moore" <htmoore@comcast.net>]

[-- Attachment #1.1: Type: text/plain, Size: 1561 bytes --]

I just bought two Hauppauge HVR-1600 cards and I'm trying to set them up in 

Mythdorra 5. I have the cx18 drivers installed but it is only initializing
one 

card. I'm getting the following message when I do a dmesg | grep cx18. Has 

anyone ran accross this problem before with duel cards of the same model and
if 

so, how do I fix it? Any help will be greatly appreciated.

 

Thanks,

Tom Moore

Houston, TX

 

dmesg | grep cx18

cx18:  Start initialization, version 1.0.1

cx18-0: Initializing card #0

cx18-0: Autodetected Hauppauge card

cx18-0: Unreasonably low latency timer, setting to 64 (was 32)

cx18-0: cx23418 revision 01010000 (B)

cx18-0: Autodetected Hauppauge HVR-1600

cx18-0: VBI is not yet supported

tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)

cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)

cx18-0: Disabled encoder IDX device

cx18-0: Registered device video0 for encoder MPEG (2 MB)

DVB: registering new adapter (cx18)

cx18-0: DVB Frontend registered

cx18-0: Registered device video32 for encoder YUV (2 MB)

cx18-0: Registered device video24 for encoder PCM audio (1 MB)

cx18-0: Initialized card #0: Hauppauge HVR-1600

cx18-1: Initializing card #1

cx18-1: Autodetected Hauppauge card

cx18-1: Unreasonably low latency timer, setting to 64 (was 32)

cx18-1: ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h

cx18-1: or disabling CONFIG_HIGHMEM4G into the kernel would help

cx18-1: Error -12 on initialization

cx18: probe of 0000:02:04.0 failed with error -12

cx18:  End initialization

 


[-- Attachment #1.2: Type: text/html, Size: 7972 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb