[U-Boot] [PATCH] zlib: allow 0 as destination pointer

From: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] zlib: allow 0 as destination pointer
Date: Wed, 29 Jul 2009 08:07:39 +0200	[thread overview]
Message-ID: <001601ca1012$e0f72730$c08182a4@st.com> (raw)
In-Reply-To: <200907280831.13487.sr@denx.de>

Very good!!!
So is it time to re-apply zlib patch to u-boot main tree, together
Alessandro's patch?

Wolfgang, what's your position?

Best Regards,
Giuseppe

-----Original Message-----
From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On
Behalf Of Stefan Roese
Sent: Tuesday, July 28, 2009 8:31 AM
To: Alessandro Rubini
Cc: u-boot at lists.denx.de; rhabarber1848 at web.de
Subject: Re: [U-Boot] [PATCH] zlib: allow 0 as destination pointer

On Monday 27 July 2009 18:40:31 Alessandro Rubini wrote:
> The entry point of an image can be 0 (like on PowerPC), so allow next_out
> to be NULL in inflate()
>
> Signed-off-by: Alessandro Rubini <rubini@unipv.it>
> ---
>
> Stefan Roese:
> > I'll try to uncompress to something != 0 tomorrow on PPC.
>
> You are right. I naively thought my arm has RAM at 0 like PPC, but
> entry point of image is not really 0.

Yes, this works:

Tested-by: Stefan Roese <sr@denx.de>

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot