From: "Harald Heigl" <Harald_Heigl@gmx.at>
To: 'LVM general discussion and development' <linux-lvm@redhat.com>
Subject: Re: [linux-lvm] Disk Partitioning tools, GUI preferably- best for LVM Logical Volume Management ; jor
Date: Sat, 24 Jul 2010 18:54:53 +0200 [thread overview]
Message-ID: <001601cb2b50$f13ee4c0$d3bcae40$@at> (raw)
In-Reply-To: <1279942095.12963.1386480183@webmail.messagingengine.com>
Hi!
>[This list is for all LVM questions, not just RedHat distro questions,
>yes?]
Yes this list is for lvm in general ...
>[BTW, is making that 4th partition a logical one, & putting more
>partitions in there necessary anymore?
The limitation of the 4 partitions is not a linux thing, the "Master Boot
Record" (MBR) is on a single sector on your disk (sectors are usually
512Bytes big), it's a historical thing. The MBR can hold 4 entries and not
more.
>I'd greatly appreciate a competent GUI partitioner. I only partition
>disks a few times per year, & it's great to have the GUI have the
>commands available to do the partitions ...
As said you may use one drive as pv and divide that into lvs. In Fedora
there is also a gui for lvm, but I didn't use it really, so I can't
recommend it. I always use command-line for this (partitioning (if ever
necessary) with fdisk and lv-commands)
The reasons for dos-partiton as Stuart said:
>3) you are using the grub boot loader, which doesn't speak LVM yet
3) If you have kubuntu 10.04 (I suggest 10.4 is a spell error) you should
have grub2 and therefore it should be lvm-aware even on your boot disk (but
not every distro can handle this, that�s true ...)
Greetings,
Harald Heigl
>-----Urspr�ngliche Nachricht-----
>Von: linux-lvm-bounces@redhat.com [mailto:linux-lvm-bounces@redhat.com]
>Im Auftrag von giovanni_re
>Gesendet: Samstag, 24. Juli 2010 05:28
>An: linux-lvm@redhat.com
>Betreff: [linux-lvm] Disk Partitioning tools, GUI preferably- best for
>LVM Logical Volume Management ; jor
>
>What are the best tools (ie sw) for doing disk partitioning? Preferably
>GUI. but, console mode suggestions welcome if that's best, or all there
>is.
>
>For use in KUbuntu 10.4.
>
>[This list is for all LVM questions, not just RedHat distro questions,
>yes?]
>
>
>==
>KDE 3 used to have qtPartEd, which used to be able to actually _create_
>partitions. That's not in KDE4, ie in KUbuntu 10.4.
>
>I've installed GPartEd, but it can't see into LVs - Logical volumes.
>Thus, it can't _create_ anything there.
>
>I'd greatly appreciate a competent GUI partitioner. I only partition
>disks a few times per year, & it's great to have the GUI have the
>commands available to do the partitions, so one doesn't have to spend
>the time to keep up on the specifics of commands to deal with new disk
>formats & partitioning methods, & do hand calculations of partitions
>sizes, etc.
>
>
>==
>I installed KU 10.4 with the alternate installer. I've used the console
>mode installer for many years, probably because it gives me the ability
>to partition my disks well.
>
>I usually put, in order from the beginning, two Linux partititions, a
>swap partition, then make a LVM for the 4th partition. & put a "/home"
>partition there, then leave space for further partitions - like, if i
>want to add another linux partition - so I can set up different distros
>& boot into them.
>
>
>[BTW, is making that 4th partition a logical one, & putting more
>partitions in there necessary anymore? Used to be that disks were
>limited at 4 partitions, & one had to make a big 4th partition & put sub
>partitions inside that. After all these years - in Linux, can we yet
>put as many partitions as we want without making a logical partition? I
>think there was a limit of 16 partitions before. Can more than that be
>done now?]
>
>
>==
>So, I've got that big LV 4th partition, with empty space (2TB drive),
>and now I want to create some more linux partitions so I can install
>some other distros.
>
>But, GPartEd doesn't show what's in the LVM. And, thus it further can't
>create any partions there. - It's a tragedy GPartEd isn't better
>maintained. :(
>
>
>==
>So, what are the easiest tools to create additional partions in Logical
>Volumes?
>
>Thanks :)
>
>== Join in the Global weekly meetings, via VOIP, about all Free SW HW &
>Culture
>http://sites.google.com/site/berkeleytip/
>
>_______________________________________________
>linux-lvm mailing list
>linux-lvm@redhat.com
>https://www.redhat.com/mailman/listinfo/linux-lvm
>read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
next prev parent reply other threads:[~2010-07-24 16:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-24 3:28 [linux-lvm] Disk Partitioning tools, GUI preferably- best for LVM Logical Volume Management ; jor giovanni_re
2010-07-24 4:39 ` Stuart D. Gathman
2010-07-24 16:54 ` Harald Heigl [this message]
2010-07-26 8:45 ` Bryn M. Reeves
2010-07-26 12:16 ` Stuart D. Gathman
2010-07-26 12:43 ` Bryn M. Reeves
2010-07-26 13:59 ` Stuart D. Gathman
2010-07-26 14:04 ` Bryn M. Reeves
2010-07-26 16:48 ` Stuart D. Gathman
2010-07-26 22:32 ` [linux-lvm] Disk Partitioning tools, - for having multi distros bootable - " giovanni_re
2010-07-28 18:10 ` Stuart D Gathman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001601cb2b50$f13ee4c0$d3bcae40$@at' \
--to=harald_heigl@gmx.at \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.