From: "Vladimír Třebický" <druid@mail.cz>
To: <linux-kernel@vger.kernel.org>
Subject: ALi M1543 on P200
Date: Fri, 13 Sep 2002 21:12:13 +0200 [thread overview]
Message-ID: <001701c25b59$7756a820$4500a8c0@cybernet.cz> (raw)
I cannot use DMA on my new disks. UDMA is enabled in BIOS in mode UDMA 2. It
doesn't work even in auto mode. ide0=dma doesn't work either. hdparm -d 1
/dev/hda causes "operation not permitted"
/dev/hda:
Model=ST320413A, FwRev=3.39, SerialNo=7ED1R0TR
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39102336
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4 5
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:0b.0
PCI: Assigned IRQ 10 for device 00:0b.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: simplex device with no drives: DMA disabled
ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
ALI15X3: simplex device with no drives: DMA disabled
ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
hda: ST320413A, ATA DISK drive
hdb: WDC WD300BB-00AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=2434/255/63
hdb: host protected area => 1
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63
next reply other threads:[~2002-09-13 19:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-13 19:12 Vladimír Třebický [this message]
2002-09-13 19:18 ` ALi M1543 on P200 Tomas Szepe
2002-09-13 23:51 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001701c25b59$7756a820$4500a8c0@cybernet.cz' \
--to=druid@mail.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.