From: "Gavin Shan" <shan.gavin.cn@gmail.com>
To: <linux-kernel@vger.kernel.org>
Subject: PIIX4 DMA Timeout
Date: Tue, 20 May 2008 20:23:11 +0800 [thread overview]
Message-ID: <001901c8ba74$4662ec80$01fca8c0@microsof60b8d6> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1995 bytes --]
Hi All,
There has one MV64460 on my board, which includes 2 PCI bridges. PIIX4 is on slot 3 of PCI1.
But now, IDE driver reported it's timeouted on DMA operation. Thanks in advance for your
suggestions.
Resources of PIIX4 function 1
=====================
0001:00:03.1: idx=0 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=1 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=2 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=3 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=4 flags=0x00000101 start=0xd8000000 end=0xd800000f
Console Output
============
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0001:00:03.1
0001:00:03.1: idx=0 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=1 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=2 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=3 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=4 flags=0x00000101 start=0xd8000000 end=0xd800000f
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd8000000-0xd8000007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd8000008-0xd800000f, BIOS settings: hdc:pio, hdd:pio
hdc: HTE721010G9AT00, ATA DISK drive
hdc: max request size: 512KiB
hdc: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
hdc: cache flushes supported
hdc:<4>hdc: dma_timer_expiry: dma status == 0x26
hdc: DMA interrupt recovery
hdc: lost interrupt
hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: DMA disabled
ide1: reset: success
hdc2 hdc3 hdc4
Thanks in advance,
Gavinÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next reply other threads:[~2008-05-20 12:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-20 12:23 Gavin Shan [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-05-20 13:04 PIIX4 DMA Timeout Gavin Shan
2008-05-20 16:53 ` Maciej W. Rozycki
2008-05-21 1:08 ` gshan
2008-05-21 2:37 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001901c8ba74$4662ec80$01fca8c0@microsof60b8d6' \
--to=shan.gavin.cn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.