Mandrake 7.2 on kernel 2.4.0-test10


---------------------- CPU INFO -------------------------
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 3
model name	: Pentium II (Klamath)
stepping	: 4
cpu MHz		: 233.000869
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
sep_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov mmx
bogomips	: 466.94

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 3
model name	: Pentium II (Klamath)
stepping	: 3
cpu MHz		: 233.000869
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
sep_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov mmx
bogomips	: 466.94


------------------------------- IOMEM ---------------------
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Extension ROM
000cc800-000d47ff : Extension ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
  00100000-00286357 : Kernel code
  00286358-0029cd1f : Kernel data
dfc00000-dfcfffff : PCI Bus #01
e0000000-e3ffffff : Intel Corporation 440LX/EX - 82443LX/EX Host bridge
e7e00000-e7efffff : PCI Bus #01
ebfeef80-ebfeefff : Digital Equipment Corporation DECchip 21041 [Tulip Pass 3]
  ebfeef80-ebfeefff : eth0
ebfef000-ebfeffff : Adaptec AIC-7881U
ec000000-efffffff : S3 Inc. 86c764/765 [Trio32/64/64V+]
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

----------------------------------- IOPORTS ---------------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-023f : NE2000
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
5f00-5f1f : Intel Corporation 82371AB PIIX4 ACPI
6100-613f : Intel Corporation 82371AB PIIX4 ACPI
c000-cfff : PCI Bus #01
da00-da7f : Digital Equipment Corporation DECchip 21041 [Tulip Pass 3]
  da00-da7f : eth0
dc00-dc1f : Intel Corporation 82371AB PIIX4 USB
de00-deff : Adaptec AIC-7881U
  de00-defe : aic7xxx
ffa0-ffaf : Intel Corporation 82371AB PIIX4 IDE
  ffa0-ffa7 : ide0
  ffa8-ffaf : ide1

------------------------------- MODULES -----------------------
ne                      7360   1 (autoclean)
8390                    6544   0 (autoclean) [ne]
tulip                  33808   1 (autoclean)
vfat                   12368   0 (unused)
fat                    33792   0 [vfat]

-------------------------- lspci -vvv ---------------------------------------------

00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 248 set
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 set
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e7e00000-e7efffff
	Prefetchable memory behind bridge: dfc00000-dfcfffff
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 set
	Region 4: I/O ports at ffa0 [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 240 set
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at dc00 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:0e.0 SCSI storage controller: Adaptec AIC-7881U
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 8 min, 8 max, 248 set, cache line size 08
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at de00 [size=256]
	Region 1: Memory at ebfef000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at ebfd0000 [disabled] [size=64K]

00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 set
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at da00 [size=128]
	Region 1: Memory at ebfeef80 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at ebf80000 [disabled] [size=256K]

00:12.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 44) (prog-if 00 [VGA])
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=64M]
	Expansion ROM at ebff0000 [disabled] [size=64K]