All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cedric GROSS" <cg@cgross.info>
To: <sedat.dilek@gmail.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: RE: Firmware error for Centrino N 2230
Date: Sat, 13 Jul 2013 13:15:32 +0200	[thread overview]
Message-ID: <001b01ce7fba$4bd15e20$e3741a60$@info> (raw)
In-Reply-To: <CA+icZUVoZkg3nT6=SwTaLCWoa+v6aLkXSP5b71a0GmxMMWOyHA@mail.gmail.com>

Hello Sedat,

> -----Message d'origine-----
> De : Sedat Dilek [mailto:sedat.dilek@gmail.com]
> Envoyé : samedi 13 juillet 2013 13:04
> À : Cedric GROSS
> Cc : linux-wireless@vger.kernel.org
> Objet : Re: Firmware error for Centrino N 2230
> 
> On Sat, Jul 13, 2013 at 12:12 PM, Cedric GROSS <cg@cgross.info> wrote:
> > Hello,
> >
> > I’m trying to adapt current freebsd driver for supporting my 2230
> NIC.
> >
> > I try to follow ucode command order defined in kernel 3.2 but I reach
> > some difficulties because firmware raise error.
> >
> > Runtime uCode is alive. So far I sent calib result (cmd xB0),
> > configured advanced BT coexistence (cmd x9B,xCC and xCD) running
> > runtime calib (cmd
> > x65) but the command configuring valid chain (cmd x65) failed as the
> > result below :
> > CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)
> >   IWN_HW_IF_CONFIG: 0x00800302   IWN_INT_COALESCING: 0x0000ff40
> > IWN_INT: 0x04000000
> >   IWN_INT_MASK: 0x00000000   IWN_FH_INT: 0x00000000   IWN_GPIO_IN:
> > 0x00000000
> >    IWN_RESET: 0x00000000   IWN_GP_CNTRL: 0x080403c5   IWN_HW_REV:
> 0x000000c8
> >   IWN_EEPROM: 0x08450ffd   IWN_EEPROM_GP: 0x90000801   IWN_OTP_GP:
> > 0x00030001
> >      IWN_GIO: 0x00080044   INW_GP_UCODE: 0x00000004   IWN_GP_DRIVER:
> > 0x00000080
> >   IWN_GP1_DRIVER: 0x00000000   IWN_UCODE_DRV_GP2: 0x00000000
> IWN_LED:
> > 0x00000018
> >   IWN_DRAM_INT_TBL: 0x880b76e5   IWN_GIO_CHICKEN: 0x29800200
> IWN_ANA_PLL:
> > 0x00000000
> >   IWN_HW_REV_WA: 0x0001001a   IWN_DBG_HPET_MEM: 0xffff0000
> > firmware error log:
> >   error type      = "UNKNOWN" (0x00001987)
> >   program counter = 0x000179B4
> >   source line     = 0x00000167
> >   error data      = 0x0000000000000000
> >   branch link     = 0x0001798200017982
> >   interrupt link  = 0x0000EC7A00000000
> >   time            = 46566
> >
> > What I’m missing ?
> > What is meaning of firmware error ?
> >
> 
> What distro?
> If this is Debian or Ubuntu, this is not a vanilla but distro-patched
> kernel-version.

I'm working on freeBSD. So it's not a linux distro ;)

> 
> Can you provide more infos?
> Your kernel-config file, dmesg output, name of loaded firmware file,
> etc.

For firmware : iwlwifi-2030-18.168.6.1.fw

For the rest, I can send you what you wish, but it's not a linux output.

> 
> Did you check for newer firmware files (see [1])?
> 
> Did you try a higher kernel-release?

Doesn't apply ;)

> 
> - Sedat -
> 
> [1] http://wireless.kernel.org/en/users/Drivers/iwlwifi
> 
> > Many thanks for your help.
> >
> > Best regards
> > Cedric
> >
> > --

Thanks for help anyway.
Cedric


  reply	other threads:[~2013-07-13 11:15 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-13 10:12 Firmware error for Centrino N 2230 Cedric GROSS
2013-07-13 11:03 ` Sedat Dilek
2013-07-13 11:15   ` Cedric GROSS [this message]
2013-07-13 11:26     ` Sedat Dilek
2013-07-14  5:03       ` Emmanuel Grumbach
2013-07-14  9:47         ` Cedric GROSS
2013-07-14 10:51           ` Johannes Berg
2013-07-15  8:21             ` Cedric GROSS

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='001b01ce7fba$4bd15e20$e3741a60$@info' \
    --to=cg@cgross.info \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sedat.dilek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.