From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Michael P. Carel" Subject: Re: Address or Write Phase Parity Error in Adaptec Ultra320(29320) Date: Mon, 14 Apr 2003 10:43:43 +0800 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <001d01c3022f$ab3806c0$8601a8c0@teamglac.com> References: <005901c30229$735b8c00$8601a8c0@teamglac.com> <2555792704.1050287878@aslan.scsiguy.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_001A_01C30272.B7D93AA0" Return-path: Received: from team5.teamglac.com ([203.87.142.130]:21769 "HELO team5.teamglac.com") by vger.kernel.org with SMTP id S262722AbTDNCnP (for ); Sun, 13 Apr 2003 22:43:15 -0400 Received: (from root@localhost) by team5.teamglac.com (8.9.3/8.9.3) id KAA23210 for ; Mon, 14 Apr 2003 10:49:37 +0800 List-Id: linux-scsi@vger.kernel.org To: "Justin T. Gibbs" , linux-scsi@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_001A_01C30272.B7D93AA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit attached was the dmesg and the lspci output. I'm using EPOX 4G4A with Intel chipset that have a 32bit PCI slots. mike ----- Original Message ----- From: "Justin T. Gibbs" To: "Michael P. Carel" ; Sent: Monday, April 14, 2003 10:37 AM Subject: Re: Address or Write Phase Parity Error in Adaptec Ultra320(29320) > > Hi, > > > > I'm having problem with my Adaptec Ultra320(29320) in RedHat Linux 7.3 > > with kernel 2.4.18-3 a Address or Write Phase Parity Error always display on > > screen and if the system is idle for a long time, the server network > > crushes. I've already used the driver revision 1.3.6 from the freeBSD > > website. > > > > Can anyone help me please... > > Can you send me a full dmesg of your system and the output from "lspci -vv"? > Someone is "talking trash" on the PCI bus. This is a very frequent problem > with certain motherboards using VIA chipsets. > > -- > Justin > > - > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ------=_NextPart_000_001A_01C30272.B7D93AA0 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Linux version 2.4.18-3 (bhcompile@daffy.perf.redhat.com) (gcc version = 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:37:53 EDT = 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. On node 0 totalpages: 262128 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32752 pages. Kernel command line: auto BOOT_IMAGE=3Dlinux ro root=3D802 = BOOT_FILE=3D/boot/vmlinuz-2.4.18-3 Initializing CPU#0 Detected 2039.955 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4063.23 BogoMIPS Memory: 1030888k/1048512k available (1119k kernel code, 17236k reserved, = 775k data, 280k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfae70, last bus=3D2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT = SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A Real Time Clock Driver v1.10e block: 1024 slots per queue, batch=3D256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=3D8086, = DID=3D24cb PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: (ide_setup_pci_device:) Could not enable device. hda: CD-540E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 295k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno =3D 2 PCI: Found IRQ 11 for device 02:02.0 PCI: Found IRQ 10 for device 02:02.1 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.6 aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI 33 or 66Mhz, = 512 SCBs scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.6 aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI 33 or 66Mhz, = 512 SCBs blk: queue f7e61a18, I/O limit 4095Mb (mask 0xffffffff) (scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) (scsi1:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: SEAGATE Model: ST336607LW Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7865a18, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST336607LW Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7865c18, I/O limit 4095Mb (mask 0xffffffff) scsi1:A:0:0: Tagged Queuing enabled. Depth 32 scsi1:A:1:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 > SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB) sdb: sdb1 sdb2 sdb3 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 280k freed Adding Swap: 2048276k swap-space (priority -1) Adding Swap: 2048248k swap-space (priority -2) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,18), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,17), internal journal EXT3-fs: mounted filesystem with ordered data mode. ------=_NextPart_000_001A_01C30272.B7D93AA0 Content-Type: application/octet-stream; name="lspci.out" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="lspci.out" 00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 01) Subsystem: Unknown device 1695:4002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- 00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 01) (prog-if = 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 81) (prog-if = 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = SERR- TAbort- = SERR- [size=3D8] Region 1: I/O ports at [size=3D4] Region 2: I/O ports at [size=3D8] Region 3: I/O ports at [size=3D4] Region 4: I/O ports at f000 [size=3D16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=3D1K] 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) Subsystem: Unknown device 1695:4002 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = SERR- TAbort- = SERR- [disabled] [size=3D64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=3D31 SBA- 64bit- FW- Rate=3Dx1,x2 Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D 02:00.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 = MBit (rev 31) Subsystem: Unknown device 3030:5032 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = SERR- [disabled] [size=3D256K] Capabilities: [50] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 02:02.0 SCSI storage controller: Adaptec: Unknown device 8012 (rev 03) Subsystem: Adaptec: Unknown device 0042 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = SERR- [disabled] [size=3D512K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=3D0/1 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [94] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=3D0 OST=3D4 Status: Bus=3D0 Dev=3D0 Func=3D0 64bit- 133MHz- SCD- USC-, = DC=3Dsimple, DMMRBC=3D0, DMOST=3D0, DMCRS=3D0, RSCEM- 02:02.1 SCSI storage controller: Adaptec: Unknown device 8012 (rev 03) Subsystem: Adaptec: Unknown device 0042 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = SERR- [disabled] [size=3D512K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=3D0/1 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [94] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=3D0 OST=3D4 Status: Bus=3D0 Dev=3D0 Func=3D0 64bit- 133MHz- SCD- USC-, = DC=3Dsimple, DMMRBC=3D0, DMOST=3D0, DMCRS=3D0, RSCEM- ------=_NextPart_000_001A_01C30272.B7D93AA0--