From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Farmer Date: Sun, 27 Jun 2004 16:22:39 +0100 Subject: [U-Boot-Users] MPPC8560ADS and U-Boot 1.1.1 problems ? Message-ID: <001e01c45c5a$99776fd0$9f4cfc3e@RFarmersIBM> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Greetings, We trying to install the latest version of U-Boot 1.1.1 on a MPPC 8560ADS development board, this initially does not boot (it actually sits inside in a permanent loop after the first couple of instructions). We have a Abatron debugger with a GDB/DDD interface but we don't seem to be able to step through the code to understand why it doesn't work. We built U-Boot with the correct settings for the board, I believe that the dev board we're using is one of the support variants. Are there any known problems with 1.1.1 and the 8560ADS boards ? Any help that any one could give would be extremely useful. ADVthanxANCE Rob Farmer Senior Software Engineer Accton Technology Ltd UK Tel: +44 (0) 8700 990400 Fax: +44 (0) 8700 990401 Cell: +44 (0) 7791 509347 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20040627/87535972/attachment.htm