From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Thu, 07 Oct 2004 07:53:09 +0000 Subject: Re: [LARTC] What is the reccomended minimum rate for leaf htb classfor accurate operation? Message-Id: <001e01c4ac42$b70566a0$0802a8c0@monster> List-Id: References: <20041006073827.5C1826CB7C7@mail.caucasus.net> In-Reply-To: <20041006073827.5C1826CB7C7@mail.caucasus.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > mjoachimiak@poczta.onet.pl wrote: > > Your gues is right. To get HTB work correctly you must know rate parameter > > for your connection also known as CIR. > > Coud you tell what minimum rate your clients have? > > My worst HTB class has rate&ceil 778bps. > > I guess the lower the rate, the less accurate the result. It can't be > accurate, because the class already exceeds it's limit by sending just > one single packet. I agree. As far as I know average MTU is 1500bytes. I have rate 13kbit/825bytes so the limit should not be reached. Maybe there is overhead on ppp link and with this overhead clients gets congested? What do you think? Any ideas? > Maybe it's more accurate in the long run, but I don't have any > statistics to prove that. Anyway, the traffic for that class is damn > slow, and that's all I need to know. ;-) > > Andreas > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/