From: <ps00de@yahoo.de>
To: <linux-media@vger.kernel.org>
Subject: em28xx WinTV dualHD in Raspbian
Date: Tue, 18 Oct 2016 23:55:04 +0200 [thread overview]
Message-ID: <003101d2298a$48b12400$da136c00$@yahoo.de> (raw)
In-Reply-To:
Hi there,
I am running an updated raspbian image with kernel 4.4.23-v7+, matching
linux-headers-4.4.23-v7+_4.4.23-v7+-2_armhf from here:
https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/ and
dvb-demod-si2168-b40-01.fw (see linuxtv-wiki).
Before the last apt-get upgrade this works great, but now, it ends up in
recognizing the device but not create /dev/dvb.
Log:
Oct 18 23:07:59 mediapi kernel: [ 7587.975803] usb 1-1.3: new high-speed USB
device number 6 using dwc_otg
Oct 18 23:07:59 mediapi kernel: [ 7588.076796] usb 1-1.3: New USB device
found, idVendor=2040, idProduct=0265
Oct 18 23:07:59 mediapi kernel: [ 7588.076817] usb 1-1.3: New USB device
strings: Mfr=3, Product=1, SerialNumber=2
Oct 18 23:07:59 mediapi kernel: [ 7588.076842] usb 1-1.3: Product: dualHD
Oct 18 23:07:59 mediapi kernel: [ 7588.076853] usb 1-1.3: Manufacturer: HCW
Oct 18 23:07:59 mediapi kernel: [ 7588.076864] usb 1-1.3: SerialNumber:
0011540068
Oct 18 23:08:00 mediapi kernel: [ 7589.111483] media: Linux media interface:
v0.10
Oct 18 23:08:00 mediapi kernel: [ 7589.121622] Linux video capture
interface: v2.00
Oct 18 23:08:00 mediapi kernel: [ 7589.126137] em28xx: New device HCW dualHD
@ 480 Mbps (2040:0265, interface 0, class 0)
Oct 18 23:08:00 mediapi kernel: [ 7589.126157] em28xx: DVB interface 0
found: isoc
Oct 18 23:08:00 mediapi kernel: [ 7589.127012] em28xx: chip ID is em28174
Oct 18 23:08:01 mediapi kernel: [ 7590.338459] em28174 #0: EEPROM ID = 26 00
01 00, EEPROM hash = 0x7ee3cbc8
Oct 18 23:08:01 mediapi kernel: [ 7590.338482] em28174 #0: EEPROM info:
Oct 18 23:08:01 mediapi kernel: [ 7590.338496] em28174 #0: microcode
start address = 0x0004, boot configuration = 0x01
Oct 18 23:08:01 mediapi kernel: [ 7590.346046] em28174 #0: AC97 audio (5
sample rates)
Oct 18 23:08:01 mediapi kernel: [ 7590.346064] em28174 #0: 500mA max
power
Oct 18 23:08:01 mediapi kernel: [ 7590.346079] em28174 #0: Table at
offset 0x27, strings=0x0e6a, 0x1888, 0x087e
Oct 18 23:08:01 mediapi kernel: [ 7590.347683] em28174 #0: Identified as
Hauppauge WinTV-dualHD DVB (card=99)
Oct 18 23:08:01 mediapi kernel: [ 7590.355143] tveeprom 4-0050: Hauppauge
model 204109, rev B2I6, serial# 11540068
Oct 18 23:08:01 mediapi kernel: [ 7590.355170] tveeprom 4-0050: tuner model
is SiLabs Si2157 (idx 186, type 4)
Oct 18 23:08:01 mediapi kernel: [ 7590.355188] tveeprom 4-0050: TV standards
PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom
0xfc)
Oct 18 23:08:01 mediapi kernel: [ 7590.355204] tveeprom 4-0050: audio
processor is None (idx 0)
Oct 18 23:08:01 mediapi kernel: [ 7590.355219] tveeprom 4-0050: has no
radio, has IR receiver, has no IR transmitter
Oct 18 23:08:01 mediapi kernel: [ 7590.355233] em28174 #0: dvb set to isoc
mode.
Oct 18 23:08:01 mediapi rsyslogd-2007: action 'action 17' suspended, next
retry is Tue Oct 18 23:08:31 2016 [try http://www.rsyslog.com/e/2007 ]
Oct 18 23:08:01 mediapi kernel: [ 7590.357918] usbcore: registered new
interface driver em28xx
Oct 18 23:08:01 mediapi kernel: [ 7590.369200] em28xx_dvb: disagrees about
version of symbol dvb_dmxdev_init
Oct 18 23:08:01 mediapi kernel: [ 7590.369228] em28xx_dvb: Unknown symbol
dvb_dmxdev_init (err -22)
[…] (multiple „disagrees“ and „unknown symbol“)
ct 18 23:08:01 mediapi kernel: [ 7590.417607] em28174 #0: Registering input
extension
Oct 18 23:08:01 mediapi kernel: [ 7590.455841] Registered IR keymap
rc-hauppauge
Oct 18 23:08:01 mediapi kernel: [ 7590.456798] input: em28xx IR (em28174 #0)
as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
Oct 18 23:08:01 mediapi kernel: [ 7590.457059] rc rc0: em28xx IR (em28174
#0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
Oct 18 23:08:01 mediapi kernel: [ 7590.457715] em28174 #0: Input extension
successfully initalized
Oct 18 23:08:01 mediapi kernel: [ 7590.457734] em28xx: Registered (Em28xx
Input Extension) extension
Before it stopped working, I have executed the apt upgrade, installed the
new kernel header and run
git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install
No errors appeared.
What I am doing wrong? The last git clone was approx. in August.
2nd question: Is there anything new in supporting both tuners of the dualHD
stick?
Thanks,
Patrick
next reply other threads:[~2016-10-18 21:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 21:55 ps00de [this message]
2016-10-19 15:35 ` em28xx WinTV dualHD in Raspbian Mauro Carvalho Chehab
2016-10-19 19:08 ` AW: " ps00de
-- strict thread matches above, loose matches on Subject: below --
2016-10-19 18:50 ps00de
2016-10-19 19:14 ` Mauro Carvalho Chehab
2016-10-22 17:36 ` AW: " ps00de
2016-10-23 10:03 ` Andrey Utkin
2016-10-23 10:14 ` Olli Salonen
2016-11-03 20:45 ` Christian Steiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003101d2298a$48b12400$da136c00$@yahoo.de' \
--to=ps00de@yahoo.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.