RE: [ANNOUNCE] Git v2.21.0-rc2

["Randall S. Becker" <rsbecker@nexbridge.com>]

On February 21, 2019 10:55, I wrote:
> On February 20, 2019 14:42, Junio C Hamano wrote:
> > "Randall S. Becker" <rsbecker@nexbridge.com> writes:
> >
> > > On February 19, 2019 18:29, Junio C Hamano wrote:
> > >> A release candidate Git v2.21.0-rc2 is now available for testing at
> > >> the usual places.  It is comprised of 474 non-merge commits since
> > >> v2.20.0, contributed by 61 people, 16 of which are new faces.
> > >
> > > Thanks. t5562 works properly on NonStop (3 tests under various loads).
> > > I am starting a full regression test now - see you in two days or so
> > > with a full report.
> >
> > Thanks.  In the end I ended up doing the following:
> >
> >  - kept most of your "feed NULs generated from a helper program via
> >    pipe, instead of reading from /dev/zero" patch,
> >
> >  - replaced the helper program used in the above with the test-tool
> >    one by Dscho,
> >
> >  - used Max's "do not reuse the output file---the background writer
> >    about to die may still have it open when the next test starts",
> >
> >  - used Max's "when testing the program with overly large input
> >    declared with content-length, do not have to feed from /dev/zero;
> >    /dev/null suffices as a mistaken program attempting to read would
> >    die when seeing EOF anyway" patch to reduce one mention of
> >    /dev/zero (or one pipe from the helper output) further.
> >
> > Hopefully Dscho's Azure thing would also be happy with one less use of
> > Perl script.
> >
> > As I said earlier, a few places in t/ still mention /dev/zero and I
> > think it is a real bug on platforms without /dev/zero in t4153:
> >
> >     $ git grep -h dev/zero t/
> >             test_must_fail test_terminal git am --3way </dev/zero &&
> >             test_must_fail test_terminal git am --reject </dev/zero &&
> >
> > Curiously, applying the attached patch and running the test on Linux
> > would notice that we do not have such a device file, and the use of
> > test_must_fail does *not* make it a-OK [*].  I am not sure why you are
> > not getting hit by the same issue.
> >
> > 	Side note: test_must_fail is to ensure that the command
> > 	exits in a controlled way without segfault, so at the first
> > 	glance, replacing /dev/zero with something nonsensical and
> > 	nonexistent ought to make the command pass, but that is not
> > 	the case.  The shell notices redirection failure and aborts
> > 	the &&-chain.  This behaviour matches what we want, so I
> > 	won't complain ;-)
> >
> > Another mention of /dev/zero appears in t/helper/test-sha1.sh (not to
> > be confused with t/helper/test-sha1.c).  This seems to be run only
> > with an explicit "make -C t/helper check-sha1" request, so perhaps
> > nobody on your platform ran it to get hit by it.  I wonder if anybody
> > runs this on any platform, to be honest, though.  Duy Cc'ed as the
> > last person to touch that particular target---yes, I know I was guilty
> > of introducing it in b65bc21e ("Makefile: add framework to verify and
> bench sha1 implementations.", 2006-06-24).
> >
> >  t/t4153-am-resume-override-opts.sh | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/t/t4153-am-resume-override-opts.sh b/t/t4153-am-resume-
> > override-opts.sh index 8ea22d1bcb..29ef22c94f 100755
> > --- a/t/t4153-am-resume-override-opts.sh
> > +++ b/t/t4153-am-resume-override-opts.sh
> > @@ -40,7 +40,7 @@ test_expect_success TTY '--3way overrides --no-
> 3way' '
> >
> >  	# Applying side1 with am --3way will succeed due to the threeway-
> > merge.
> >  	# Applying side2 will fail as --3way does not apply to it.
> > -	test_must_fail test_terminal git am --3way </dev/zero &&
> > +	test_must_fail test_terminal git am --3way </dev/zarro &&
> >  	test_path_is_dir .git/rebase-apply &&
> >  	test side1 = "$(cat file2)"
> >  '
> > @@ -94,7 +94,7 @@ test_expect_success TTY '--reject overrides --no-
> reject'
> > '
> >  	test_path_is_dir .git/rebase-apply &&
> >  	test_path_is_missing file.rej &&
> >
> > -	test_must_fail test_terminal git am --reject </dev/zero &&
> > +	test_must_fail test_terminal git am --reject </dev/zarro &&
> >  	test_path_is_dir .git/rebase-apply &&
> >  	test_path_is_file file.rej
> >  '
> 
> Here's what we get with this patch (and without it):
> 
> /home/git/git/t: sh t4153-am-resume-override-opts.sh ok 1 - setup ok 2 #
> skip --3way overrides --no-3way (missing TTY) ok 3 - --no-quiet overrides
--
> quiet ok 4 - --signoff overrides --no-signoff ok 5 # skip --reject
overrides --
> no-reject (missing TTY) # passed all 5 test(s)
> 1..5
> 
> Technically, we have TTY, but not that dev. The TTYs are not under
/dev/tty*,
> however.

Final NonStop test results on 2.21.0-rc2:
t0021 subtest 15 failed - apparently flakey test case
t9001 subtests 33,81,117,118,145 failed - Not new. This is unsurprising as
this never worked. It might be nice to fix, but $DAYJOB.
t9020 subtests 1,2,5,6 failed - Not new. unsurprising as there is no SVN or
perl with SVN module on platform. It might be useful to have a detection to
skip of Perl SVN is not present.

Overall, pass and much better than prior releases.

Cheers,
Randall