From: <mariook@wp.pl>
To: Takashi Iwai <tiwai@suse.de>, Tobin Davis <tdavis@dsl-only.net>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: [PATCH] Asus A6RP and ALC861 headphones problem solved
Date: Fri, 20 Oct 2006 22:21:21 +0200 [thread overview]
Message-ID: <003801c6f485$4ef87010$83030a54@MIREK> (raw)
In-Reply-To: s5hejt32jtz.wl%tiwai@suse.de
[-- Attachment #1: Type: text/plain, Size: 1767 bytes --]
----- Original Message -----
From: "Takashi Iwai" <tiwai@suse.de>
To: "Tobin Davis" <tdavis@dsl-only.net>
Cc: <mariook@wp.pl>; <alsa-devel@lists.sourceforge.net>
Sent: Friday, October 20, 2006 3:33 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem
solved
> At Thu, 19 Oct 2006 16:39:10 -0700,
> Tobin Davis wrote:
>>
>> What Takashi needs is a summary and description for the repository.
>> Here's an example from one of my patches:
>>
>> Summery: hda-codec - Add toshiba model to ALC861 codec
>>
>> This patch adds support for Toshiba laptops. Code is from
>> RealTek's alsa-driver-1.0.12-4.05b tree.
>>
>> Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
>
> Yep, exactly.
>
>> Also, I made a minor revision to your patch, changing it from asus_a6rp
>> to just asus. I have been working on a similar patch for another Asus
>> Laptop (F3J), and if this works for them, great (otherwise I'm back to
>> square one). Still, better to be more generic than model specific.
>> Leave the model specific details for the config table array. Attached
>> are my changes.
>
> Don't forget to add an entry with modelname="asus", and change
> ALSA-Configuration.txt appropriately, too.
>
>
> Thanks,
>
> Takashi
Ok, so here it is :)
Summary: hda-codec - Add asus model to ALC861 codec
This patch adds support for Asus laptops (for example: Asus
A6Rp-AP002).
Signed-off-by: Mariusz Domanski <mariook@wp.pl>
I modified patch_realtek.c from the newest hg tree and made asus.patch
basing on it (also included change made by Tobin - pci_subdevice for another
asus laptop).
I also modified the newest ALSA-Configuration.txt and made patch.
Patches are in the attachment.
Thanks,
Mariusz
[-- Attachment #2: asus.patch --]
[-- Type: application/octet-stream, Size: 8000 bytes --]
--- patch_realtek.c 2006-10-20 20:58:06.000000000 +0200
+++ alsa-kernel/pci/hda/patch_realtek.c 2006-10-20 21:17:27.000000000 +0200
@@ -100,6 +100,7 @@
ALC861_6ST_DIG,
ALC861_UNIWILL_M31,
ALC861_TOSHIBA,
+ ALC861_ASUS,
ALC861_AUTO,
ALC861_MODEL_LAST,
};
@@ -6650,6 +6651,44 @@
{ 4, alc861_uniwill_m31_ch4_init },
};
+/* Set mic1 and line-in as input and unmute the mixer */
+static struct hda_verb alc861_asus_ch2_init[] = {
+ /* set pin widget 1Ah (line in) for input */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
+ { } /* end */
+};
+/* Set mic1 nad line-in as output and mute mixer */
+static struct hda_verb alc861_asus_ch6_init[] = {
+ /* set pin widget 1Ah (line in) for output (Back Surround)*/
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+ /* set pin widget 18h (mic1) for output (CLFE)*/
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+ { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861_asus_modes[2] = {
+ { 2, alc861_asus_ch2_init },
+ { 6, alc861_asus_ch6_init },
+};
+
/* patch-ALC861 */
static struct snd_kcontrol_new alc861_base_mixer[] = {
@@ -6790,6 +6829,49 @@
},
{ } /* end */
};
+
+static struct snd_kcontrol_new alc861_asus_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+ /* Input mixer control */
+ HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ .private_value = ARRAY_SIZE(alc861_asus_modes),
+ },
+ { }
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
@@ -6979,6 +7061,68 @@
{ }
};
+static struct hda_verb alc861_asus_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
+ /* route front PCM to HP */
+ { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, /* Output 0~12 step */
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ { }
+};
+
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
@@ -7350,10 +7494,13 @@
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
.config = ALC861_UNIWILL_M31 },
{ .modelname = "toshiba", .config = ALC861_TOSHIBA },
- { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
- .config = ALC861_TOSHIBA },
{ .pci_subvendor = 0x1179, .pci_subdevice = 0xff10,
.config = ALC861_TOSHIBA },
+ { .modelname = "asus", .config = ALC861_ASUS},
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x1393,
+ .config = ALC861_ASUS },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
+ .config = ALC861_ASUS },
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
@@ -7434,6 +7581,20 @@
.unsol_event = alc861_toshiba_unsol_event,
.init_hook = alc861_toshiba_automute,
},
+ [ALC861_ASUS] = {
+ .mixers = { alc861_asus_mixer },
+ .init_verbs = { alc861_asus_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
+ .channel_mode = alc861_asus_modes,
+ .need_dac_fix = 1,
+ .hp_nid = 0x06,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
};
[-- Attachment #3: ALSA-Configuration.txt.patch --]
[-- Type: application/octet-stream, Size: 374 bytes --]
--- ALSA-Configuration.txt 2006-10-20 20:58:05.000000000 +0200
+++ alsa-kernel/Documentation/ALSA-Configuration.txt 2006-10-20 21:21:54.000000000 +0200
@@ -836,6 +836,7 @@
3stack-660 3-jack (for ALC660)
uniwill-m31 Uniwill M31 laptop
toshiba Toshiba laptop support
+ asus Asus laptop support
auto auto-config reading BIOS (default)
CMI9880
[-- Attachment #4: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #5: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2006-10-20 20:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-08 20:10 [PATCH] Asus A6RP and ALC861 headphones problem solved mariook
2006-10-09 13:31 ` Takashi Iwai
2006-10-11 16:36 ` mariook
2006-10-11 16:45 ` Takashi Iwai
2006-10-17 18:56 ` Takashi Iwai
2006-10-19 22:10 ` mariook
2006-10-19 23:39 ` Tobin Davis
2006-10-20 13:33 ` Takashi Iwai
2006-10-20 20:21 ` mariook [this message]
2006-10-23 12:11 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003801c6f485$4ef87010$83030a54@MIREK' \
--to=mariook@wp.pl \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tdavis@dsl-only.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.