From: "Andrei Tanas" <andrei@tanas.ca>
To: 'Wu Fengguang' <fengguang.wu@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: digital audio on ASUS P5QL-EM motherboard
Date: Sun, 16 Nov 2008 01:29:46 -0500 [thread overview]
Message-ID: <003801c947b4$b857ffb0$2907ff10$@ca> (raw)
In-Reply-To: <20081116021525.GA7795@localhost>
> It seems that there are two problems:
> - the SPDIF output PID for you board is 0x10 instead of 0x06
You are right about this, it works with the patch you provided, with one
caveat: ALC1200 uses ALC883 patch, so instead of changing ALC882_DIGOUT_NID,
I changed ALC883_DIGOUT_NID.
How did you find out that it's 0x10 instead of 0x06? Has documentation on
ALC1200 become available?
> - codec#1 is not probed properly
I was responsible for the confusion with the missing codec. I set
probe_mask=1 parameter (as suggested in some forum as a troubleshooting
option for ALC1200) without trying to understand what it does. The probing
actually seems to work correctly.
Model autodetection:
lspci -nn -vvv shows:
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
So this SND_PCI_QUIRK fixes it (except that it's currently relying on the
temporary hack)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8206,6 +8206,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI",
ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
Thank you.
---------------------- aplay -l ----------------------
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
---------------------- aplay -L (with model=6stack-dig)
----------------------
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
---------------------- aplay -L (default options) ----------------------
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
---------------------- dmesg (with model=6stack-dig ) ----------------------
[ 8.442560] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 8.442686] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.442690] ALSA sound/pci/hda/hda_intel.c:2196: chipset global
capabilities = 0x4401
[ 8.466673] ALSA sound/pci/hda/hda_intel.c:779: codec_mask = 0x3
[ 8.466753] ALSA sound/pci/hda/hda_intel.c:1256: max_slots = 4,
codec_mask = 3, codec_probe_mask = -1
[ 8.466889] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #0
probed OK
[ 8.467018] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #1
probed OK
[ 8.490429] usb 3-1: reset full speed USB device using uhci_hcd and
address 2
[ 8.637617] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 8.641615] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2
[ 8.641689] usbcore: registered new interface driver lirc_mceusb2
[ 9.470007] ALSA sound/pci/hda/hda_intel.c:627: hda_intel:
azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
[ 10.473336] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #2
probe error; disabling it...
[ 11.503338] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #3
probe error; disabling it...
[ 11.531911] ALSA sound/pci/hda/hda_codec.c:2587: hda_codec: model
'6stack-dig' is selected
[ 11.558144] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Headphone Playback Volume, skipped
[ 11.558237] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Speaker Playback Volume, skipped
[ 11.558330] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono
Playback Volume, skipped
[ 11.558422] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Line-Out Playback Volume, skipped
[ 11.558514] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave PCM
Playback Volume, skipped
[ 11.558610] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Speaker Playback Switch, skipped
[ 11.558702] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono
Playback Switch, skipped
************** playback on **************
[ 159.960545] ALSA sound/pci/hda/hda_intel.c:1473: azx_pcm_prepare:
bufsize=0x10000, format=0x11
[ 159.960567] ALSA sound/pci/hda/hda_codec.c:841: hda_codec_setup_stream:
NID=0x10, stream=0x5, channel=0, format=0x11
[ 161.613092] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream:
NID=0x10
[ 161.613168] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream:
NID=0x10
************** playback off **************
---------------------- dmesg (no parameters) ----------------------
[ 8.972060] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 8.972187] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.972191] ALSA sound/pci/hda/hda_intel.c:2196: chipset global
capabilities = 0x4401
[ 8.996673] ALSA sound/pci/hda/hda_intel.c:779: codec_mask = 0x3
[ 8.996754] ALSA sound/pci/hda/hda_intel.c:1256: max_slots = 4,
codec_mask = 3, codec_probe_mask = -1
[ 8.996896] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #0
probed OK
[ 8.997016] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #1
probed OK
[ 10.000009] ALSA sound/pci/hda/hda_intel.c:627: hda_intel:
azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
[ 11.003343] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #2
probe error; disabling it...
[ 12.033342] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #3
probe error; disabling it...
[ 12.061914] hda_codec: Unknown model for ALC883, trying auto-probe from
BIOS...
[ 12.062480] ALSA sound/pci/hda/hda_codec.c:3303: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
[ 12.062482] ALSA sound/pci/hda/hda_codec.c:3307: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 12.062484] ALSA sound/pci/hda/hda_codec.c:3311: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 12.062485] ALSA sound/pci/hda/hda_codec.c:3312: mono: mono_out=0x0
[ 12.062487] ALSA sound/pci/hda/hda_codec.c:3320: inputs: mic=0x18,
fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
[ 12.092487] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Headphone Playback Volume, skipped
[ 12.092581] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Speaker Playback Volume, skipped
[ 12.092673] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono
Playback Volume, skipped
[ 12.092764] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Line-Out Playback Volume, skipped
[ 12.092856] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave PCM
Playback Volume, skipped
[ 12.092953] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave
Speaker Playback Switch, skipped
[ 12.093043] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono
Playback Switch, skipped
next prev parent reply other threads:[~2008-11-16 6:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <6d799ca1be9af898f664f82ade06d669@localhost>
[not found] ` <20081115002724.GA5073@mail.ustc.edu.cn>
2008-11-15 22:22 ` Fwd: Undelivered Mail Returned to Sender Andrei Tanas
[not found] ` <20081116021525.GA7795@localhost>
2008-11-16 6:29 ` Andrei Tanas [this message]
2008-11-16 6:39 ` digital audio on ASUS P5QL-EM motherboard Andrei Tanas
2008-11-16 8:27 ` Wu Fengguang
2008-11-16 17:45 ` Andrei Tanas
2008-11-17 0:50 ` [PATCH] hda: alc883 model for ASUS P5Q-EM boards Wu Fengguang
2008-11-17 9:05 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003801c947b4$b857ffb0$2907ff10$@ca' \
--to=andrei@tanas.ca \
--cc=alsa-devel@alsa-project.org \
--cc=fengguang.wu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.