Re: Masquerade don't masquerade

["Mardaga Stephan" <smardaga@brutele.be>]

Masquerade is working now.
The rule is to stop networking beforee changes to nat iptables and after
networking start.

This rule don't need to be applied for tthee filter iptables.

Thanks everyone for the help.

Stephan

----- Original Message -----
From: "Mardaga Stephan" <smardaga@brutele.be>
To: <netfilter@lists.netfilter.org>
Sent: Wednesday, August 25, 2004 9:40 PM
Subject: Re: Masquerade don't masquerade


> From: "Jason Opperisano" <Jopperisano@alphanumeric.com>
>
>
> >  iptables release 1.2.6a
> >  Linux  2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 unknown
> >
> > Chain PREROUTING (policy ACCEPT)
> > target     prot opt source               destination
> >
> > Chain POSTROUTING (policy ACCEPT)
> > target     prot opt source               destination
> > LOG        all  --  anywhere             anywhere           LOG level
> > warning
> > MASQUERADE  all  --  192.168.1.0/24       anywhere
> > LOG        all  --  anywhere             anywhere           LOG level
> > warning
> >
> > Chain OUTPUT (policy ACCEPT)
> > target     prot opt source               destination
> >
> > Any help and/or suggestions will be accepted gratefully.
>
> blind gues would be that you have the wrong interface specified in your
> MASQUERADE rule.  can you post the output of "iptables -t nat -vnL"
instead
> of just "-nL" so we can see the in/out interfaces.
>
> here are :
>
> Chain PREROUTING (policy ACCEPT 643 packets, 82862 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>
> Chain POSTROUTING (policy ACCEPT 61 packets, 18460 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>    55 16492 LOG        all  --  *      *       0.0.0.0/0
> 0.0.0.0/0          LOG flags 0 level 4
>     0     0 MASQUERADE  all  --  *      eth0    192.168.1.0/24
> 0.0.0.0/0
>    55 16492 LOG        all  --  *      *       0.0.0.0/0
> 0.0.0.0/0          LOG flags 0 level 4
>
> Chain OUTPUT (policy ACCEPT 61 packets, 18460 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>
> Stef
>
>