Can't mount nfs rw

["Nicholas Lafferty" <nlafferty@pennswoods.net>]

I'm having problems getting my diskless clients to mount NFS directories in
Read-Write mode. I'm using bpbatch and tftp to transfer the kernel and a
ramdisk for the root file system. I pass an initscript to the kernel that
mounts the root file system of the server as read-only (mounts on /ro),
/home/guest/share mounts as ro2 (read-only), and /home/guest/01 mounts as
/rw (read-write). Then init is invoked. The problem is that all of the
mounts are read-only.

#Here is what my initscript does for the mounts.
mount-t nfs -o nolock,ro,vers=2 $SERVER:/      /ro
mount-t nfs -o nolock,ro,vers=2 $SERVER:/home/guest/share      /ro2
mount-t nfs -o nolock,rw,vers=2 $SERVER:/home/guest/$ID      /rw

/sbin/init '#'

# Here is my /etc/exports
/
192.168.0.0/255.255.255.0(ro,no_root_squash)
/home/guest/share       192.168.0.0(ro,no_root,squash)
/home/guest/01            192.168.0.0(rw,no_root_squash)
/home/guest/02            192.168.0.0(rw,no_root_squash)
/home/guest/03            192.168.0.0(rw,no_root_squash)

Any suggestions on some other things to try?

Nicholas Lafferty
Manager
Pennswoods.net
Country Club Mall



-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
NFS maillist  -  NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs